Hi,
I noted that uvideo has support for the Logitech QuickCam Pro 5000 - a
piece of hardware that I have. However, ugen appears to attach to this
device instead of allowing the special firmware (installed via "#
fw_install uvideo") to configure /dev/video0 or /dev/video1, even though
those two device files are present in the system.
For example:
-bash-4.3$ luvcview
luvcview version 2.0
Video driver: x11
A window manager is available
video /dev/video0
ERROR opening V4L interface
: Device not configured
Is there something that I am missing here or is my webcam not actually
supported?
-bash-4.3$ ls -l /dev/video*
lrwxr-xr-x 1 root wheel 6 Dec 24 00:09 /dev/video -> video0
crw-rw-rw- 1 root wheel 44, 0 Dec 24 00:09 /dev/video0
crw-rw-rw- 1 root wheel 44, 1 Dec 24 00:09 /dev/video1
Thanks,
Matt
-- usbdevs -v below
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 addr 2: high speed, self powered, config 1, product
0x2514(0x2514), Standard Microsystems(0x0424), rev 0.00
port 1 powered
port 2 powered
port 4 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 addr 2: high speed, power 500 mA, config 1, QuickCam Pro
5000(0x08c5), Logitech(0x046d), rev 0.05, iSerialNumber 87C33093
port 6 powered
port 7 powered
port 8 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 addr 2: full speed, self powered, config 1, product
0x7000(0x7000), ATEN International(0x0557), rev 1.00
port 1 addr 3: low speed, power 100 mA, config 1, Type 6
Keyboard(0x0005), Fujitsu Component(0x0430), rev 1.02
port 2 powered
port 3 powered
port 4 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb6:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 addr 2: low speed, self powered, config 1, Back-UPS RS 1300 LCD
FW:838.H5 .D USB FW:H5(0x0002), American Power Conversion(0x051d), rev
1.01, iSerialNumber JB0721002454
Controller /dev/usb7:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
-- dmesg below
OpenBSD 5.8 (GENERIC.MP) #1236: Sun Aug 16 02:31:04 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 25739890688 (24547MB)
avail mem = 24955904000 (23799MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xcf49c000 (85 entries)
bios0: vendor Dell Inc. version "6.4.0" date 07/23/2013
bios0: Dell Inc. PowerEdge T710
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET DMAR MCFG WD__ SLIC ERST HEST
BERT EINJ SRAT TCPA SSDT
acpi0: wakeup devices PCI0(S5) PCI1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.46 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 16 (application processor)
cpu3: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 8, package 0
cpu4 at mainbus0: apid 18 (application processor)
cpu4: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 0, core 9, package 0
cpu5 at mainbus0: apid 20 (application processor)
cpu5: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 0, core 10, package 0
cpu6 at mainbus0: apid 1 (application processor)
cpu6: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 0, package 0
cpu7 at mainbus0: apid 3 (application processor)
cpu7: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 1, package 0
cpu8 at mainbus0: apid 5 (application processor)
cpu8: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz
cpu8:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu8: 256KB 64b/line 8-way L2 cache
cpu8: smt 1, core 2, package 0
cpu9 at mainbus0: apid 17 (application processor)
cpu9: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz
cpu9:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu9: 256KB 64b/line 8-way L2 cache
cpu9: smt 1, core 8, package 0
cpu10 at mainbus0: apid 19 (application processor)
cpu10: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz
cpu10:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu10: 256KB 64b/line 8-way L2 cache
cpu10: smt 1, core 9, package 0
cpu11 at mainbus0: apid 21 (application processor)
cpu11: Intel(R) Xeon(R) CPU X5680 @ 3.33GHz, 3458.00 MHz
cpu11:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu11: 256KB 64b/line 8-way L2 cache
cpu11: smt 1, core 10, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 1
ioapic2 at mainbus0: apid 2 pa 0xfec88000, version 20, 24 pins
ioapic2: misconfigured as apic 4, remapped to apid 2
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX1)
acpiprt2 at acpi0: bus 2 (PEX3)
acpiprt3 at acpi0: bus 4 (PEX4)
acpiprt4 at acpi0: bus 3 (PEX5)
acpiprt5 at acpi0: bus 5 (PEX7)
acpiprt6 at acpi0: bus 6 (COMP)
acpiprt7 at acpi0: bus 128 (PCI1)
acpiprt8 at acpi0: bus 129 (PEXB)
acpiprt9 at acpi0: bus 130 (PEXC)
acpiprt10 at acpi0: bus 131 (PEXD)
acpiprt11 at acpi0: bus 132 (PEXE)
acpicpu0 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu1 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu2 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu3 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu4 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu5 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu6 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu7 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu8 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu9 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu10 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu11 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
pci1 at ppb0 bus 1
bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 4
bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 16
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
pci2 at ppb1 bus 2
bnx2 at pci2 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 0
bnx3 at pci2 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 10
ppb2 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13: msi
pci3 at ppb2 bus 4
ppb3 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13
pci4 at ppb3 bus 3
mfi0 at pci4 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: apic 1 int 2
mfi0: "PERC 6/i Integrated", firmware 6.3.3.0002, 256MB cache
scsibus1 at mfi0: 64 targets
sd0 at scsibus1 targ 0 lun 0: <DELL, PERC 6/i, 1.22> SCSI3 0/direct
fixed naa.6782bcb0159dab001539dd2208b9e9e6
sd0: 285568MB, 512 bytes/sector, 584843264 sectors
sd1 at scsibus1 targ 1 lun 0: <DELL, PERC 6/i, 1.22> SCSI3 0/direct
fixed naa.6782bcb0159dab001539dd2408d809b0
sd1: 1143552MB, 512 bytes/sector, 2341994496 sectors
ppb4 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: msi
pci5 at ppb4 bus 5
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 17
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 21
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 20
uhci4 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 0 int 21
uhci5 at pci0 dev 29 function 3 "Intel 82801I USB" rev 0x02: apic 0 int 20
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 21
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci6 at ppb5 bus 6
vga1 at pci6 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 23 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVD+-RW GH50N, B104> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi1 at pciide0 channel 1 drive 0
scsibus3 at atapiscsi1: 2 targets
sd2 at scsibus3 targ 0 lun 0: <DELL, RD1000, 0053> ATAPI 0/direct
removable t10.DELL_RD1000_102212B18111022011
sd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
pci7 at mainbus0 bus 128
ppb6 at pci7 dev 3 function 0 "Intel X58 PCIE" rev 0x13: msi
pci8 at ppb6 bus 129
ppb7 at pci7 dev 5 function 0 "Intel X58 PCIE" rev 0x13: msi
pci9 at ppb7 bus 130
ppb8 at pci7 dev 7 function 0 "Intel X58 PCIE" rev 0x13: msi
pci10 at ppb8 bus 131
ppb9 at pci7 dev 9 function 0 "Intel X58 PCIE" rev 0x13: msi
pci11 at ppb9 bus 132
"Intel X58 Misc" rev 0x13 at pci7 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci7 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci7 dev 20 function 2 not configured
uhub8 at uhub0 port 3 "Standard Microsystems product 0x2514" rev
2.00/0.00 addr 2
uaudio0 at uhub1 port 5 configuration 1 interface 2 "Logitech QuickCam
Pro 5000" rev 2.00/0.05 addr 2
uaudio0: audio rev 1.00, 2 mixer controls
audio0 at uaudio0
ugen0 at uhub1 port 5 configuration 1 "Logitech QuickCam Pro 5000" rev
2.00/0.05 addr 2
uhub9 at uhub2 port 2 "ATEN International product 0x7000" rev 1.10/1.00
addr 2
uhidev0 at uhub9 port 1 configuration 1 interface 0 "Fujitsu Component
Type 6 Keyboard" rev 1.00/1.02 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhub9: device problem, disabling port 4
uhidev1 at uhub6 port 2 configuration 1 interface 0 "American Power
Conversion Back-UPS RS 1300 LCD FW:838.H5 .D USB FW:H5" rev 1.10/1.01 addr 2
uhidev1: iclass 3/0, 131 report ids
upd0 at uhidev1
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (3451443f83ae932a.a) swap on sd0b dump on sd0b
bnx0: address 14:fe:b5:c6:b5:cf
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 14:fe:b5:c6:b5:d1
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx2: address 14:fe:b5:c6:b5:d3
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx3: address 14:fe:b5:c6:b5:d5
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
uhub9: device problem, disabling port 4
uhub9: port error, restarting port 4
uhub9: device problem, disabling port 4
uhub9: port error, restarting port 4
uhub9: device problem, disabling port 4
uhub9: port error, restarting port 4
uhub9: device problem, disabling port 4
uhub9: port error, restarting port 4
uhub9: device problem, disabling port 4
uhub9: port error, restarting port 4
uhub9: port error, giving up port 4
