On 05/01/16(Tue) 13:19, Matt Adams wrote: > On 05/01/16 05:10 AM, Martin Pieuchot wrote: > >On 03/01/16(Sun) 23:18, Matt Adams wrote: > >>Hi, > >> > >>I noted that uvideo has support for the Logitech QuickCam Pro 5000 - a piece > >>of hardware that I have. However, ugen appears to attach to this device > >>instead of allowing the special firmware (installed via "# fw_install > >>uvideo") to configure /dev/video0 or /dev/video1, even though those two > >>device files are present in the system. > >> > >>For example: > >> > >>-bash-4.3$ luvcview > >>luvcview version 2.0 > >>Video driver: x11 > >>A window manager is available > >>video /dev/video0 > >>ERROR opening V4L interface > >>: Device not configured > >> > >>Is there something that I am missing here or is my webcam not actually > >>supported? > >Could you paste the output of "lsusb -v" for your webcam? lsusb(1) is > >part of the usbutils package. > > lsusb -v as follows (webcam portion only): > > Bus 001 Device 002: ID 046d:08c5 Logitech, Inc. QuickCam Pro 5000 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 1 > bMaxPacketSize0 64 > idVendor 0x046d Logitech, Inc. > idProduct 0x08c5 QuickCam Pro 5000
Thanks, does the diff below help? Index: uvideo.c =================================================================== RCS file: /cvs/src/sys/dev/usb/uvideo.c,v retrieving revision 1.183 diff -u -p -r1.183 uvideo.c --- uvideo.c 20 Dec 2015 10:08:05 -0000 1.183 +++ uvideo.c 6 Jan 2016 09:14:05 -0000 @@ -382,6 +382,12 @@ struct uvideo_devs { NULL, UVIDEO_FLAG_VENDOR_CLASS }, + { /* Incorrectly reports as bInterfaceClass=UICLASS_VENDOR */ + { USB_VENDOR_LOGITECH, USB_PRODUCT_LOGITECH_QUICKCAMPRO5K_1 }, + NULL, + NULL, + UVIDEO_FLAG_VENDOR_CLASS + }, }; #define uvideo_lookup(v, p) \ ((struct uvideo_devs *)usb_lookup(uvideo_devs, v, p))