This laptop has 2 x Samsung 128 GB SSD drives and a RAID controller
which reports as "Intel Rapid Storage Technology (Option ROM version
11.0.0.1339)".
OpenBSD 5.7, 5.8 and current (20160125) installers each report
"Available disks are: None".
Available system BIOS settings (XHCI Mode, Execute Bit Capability) and
RAID BIOS settings (non-RAID, RAID) have been toggled without success.
Windows recovery was used to upgrade the system BIOS to the latest
available version, R0092C6. The prior version (R0091C6) behaved the
same.
Linux and FreeBSD detect the drives and permit partitioning. dmesg
output from both OpenBSD and FreeBSD are below.
Any suggestions appreciated.
Thanks
===========
OpenBSD 5.9-beta (RAMDISK_CD) #1696: Mon Jan 25 19:16:37 MST 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error 80<clock_battery>
real mem = 8465932288 (8073MB)
avail mem = 8207634432 (7827MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6960 (18 entries)
bios0: vendor Insyde Corp. version "R0091C6" date 05/07/2012
bios0: Sony Corporation SVZ13115GGXI
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP TCPA UEFI ASF! HPET APIC MCFG SLIC WDAT SSDT
BOOT SSDT ASPT FPDT SSDT SSDT SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2095.54 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,X
SAVE,AVX,F16C,RDRAND,NXE,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 3 (RP02)
acpiprt3 at acpi0: bus 5 (RP04)
acpiprt4 at acpi0: bus 8 (RP07)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiec0 at acpi0
acpisony at acpi0 not configured
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
acpibat at acpi0 not configured
acpibat at acpi0 not configured
acpiac at acpi0 not configured
acpibtn at acpi0 not configured
acpibtn at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 2
iwn0 at pci1 dev 0 function 0 "Intel Centrino Advanced-N 6235" rev
0x24: msi, MIMO 2T2R, AGN, address c4:85:08:a1:a1:f8
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 3
rtsx0 at pci2 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0
ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 5
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07:
RTL8168E/8111E-VL (0x2c80), msi, address 54:53:ed:1c:10:4d
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb3 at pci0 dev 28 function 6 "Intel 7 Series PCIE" rev 0xc4: msi
pci4 at ppb3 bus 8
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel HM77 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 2 "Intel 82081HBM RAID" rev 0x04: DMA,
channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 0 int 22 for native-PCI interrupt
"Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
"vendor 0x08ff Fingerprint Sensor" rev 2.00/25.01 addr 3 at uhub2 port
1 not configured
"vendor 0x8087 product 0x07da" rev 2.00/78.69 addr 4 at uhub2 port 2
not configured
"1458529110CR48AR USB2.0 Camera" rev 2.00/0.12 addr 5 at uhub2 port 3
not configured
uhub3 at uhub1 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
umass0 at uhub3 port 1 configuration 1 interface 0 "USB Flash Disk"
rev 2.00/2.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <OTi, Flash Disk, 2.00> SCSI2 0/direct
removable serial.0ea021683E423ABD6900
sd0: 250MB, 512 bytes/sector, 512000 sectors
umass1 at uhub3 port 2 configuration 1 interface 0 " " rev 2.00/1.05 addr 4
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <, , 8.07> SCSI2 0/direct removable
serial.058f6387100791002192
sd1: 3750MB, 512 bytes/sector, 7680000 sectors
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
===========
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.2-RELEASE #0 r286666: Wed Aug 12 15:26:37 UTC 2015
r...@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz (2095.29-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC
A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX1
6,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F
16C,RDRAND>
AMD Features=0x28000800<SYSCALL,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8144035840 (7766 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <Sony VAIO>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
acpi0: <Sony> on motherboard
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
ACPI Error: No handler for Region [ECF2] (0xfffff800033ae380)
[EmbeddedControl] (20150515/evregion-176)
ACPI Error: Region EmbeddedControl (ID=3) has no handler
(20150515/exfldio-317)
ACPI Error: Method parse/execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/psparse-552)
ACPI Error: Method execution failed [\134_SB_.DOCK._STA] (Node
0xfffff800033c0740), AE_NOT_EXIST (20150515/uteval-111)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x9000-0x903f mem
0xd7000000-0xd73fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on
pci0
agp0: <IvyBridge mobile GT2 IG> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Panther Point USB 2.0 controller> mem
0xd7409000-0xd74093ff irq 23 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
hdac0: <Intel Panther Point HDA Controller> mem 0xd7400000-0xd7403fff
irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pci2: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
pci3: <unknown> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
0x6000-0x60ff mem 0xd2004000-0xd2004fff,0xd2000000-0xd2003fff irq 19
at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 54:53:ed:1c:10:4d
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci8: <ACPI PCI bus> on pcib4
ehci1: <Intel Panther Point USB 2.0 controller> mem
0xd7408000-0xd74083ff irq 20 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8M AHCI SATA controller> port
0x9088-0x908f,0x9094-0x9097,0x9080-0x9087,0x9090-0x9093,0x9060-0x907f
mem 0xd7407000-0xd74077ff irq 22 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC275 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC275 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC275 (Analog 2.0+HP/2.0)> at nid 20,21 and 18 on hdaa0
hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG MZRPC256HADR-000SO CXM05S1Q> ATA8-ACS SATA 3.x device
ada0: Serial Number S0T5NE0C706157
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <SAMSUNG MZRPC256HADR-000SO CXM05S1Q> ATA8-ACS SATA 3.x device
ada1: Serial Number S0T5NE5C706157
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC" frequency 2095288184 Hz quality 1000
Root mount waiting for: usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr
2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr
2> on usbus1
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.3: <vendor 0x08ff> at usbus0
ugen1.3: <Generic> at usbus1
umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.01, addr 3> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x4101
umass0:2:0:-1: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device
da0: Serial Number 55C5C2E4
da0: 40.000MB/s transfers
da0: 1900MB (3891200 512 byte sectors: 255H 63S/T 242C)
da0: quirks=0x2<NO_6_BYTE>
ugen0.4: <vendor 0x8087> at usbus0
ugen0.5: <1458529110CR48AR> at usbus0
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr
4> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ugen1.4: <USB> at usbus1
umass1: <USB Flash Disk, class 0/0, rev 2.00/2.00, addr 4> on usbus1
umass1: SCSI over Bulk-Only; quirks = 0xc100
umass1:3:1:-1: Attached to scbus3
