I am a newbie when it comes to OpenBSD, but have already set up my
web-server with 3.8 and is quite happy with the ease of installation and
the way it behaves. Have also installed 3.8 on a spare pc which sits in
a closet and is used for testing. Use ssh to connect to that pc.
But ran into problems when trying to mount a cd by the command: mount -t
cd9660 /dev/cd0c /mnt/cdrom which returned the error message:
input/output error.
Thereafter it was impossible to release the cd and trying to "umount" it
was to no avail; it was not mounted!
What am I doing wrong? Include the output of dmesg.
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.40GHz ("GenuineIntel" 686-class) 2.42 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem = 1073258496 (1048104K)
avail mem = 972722176 (949924K)
using 4278 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ef) BIOS, date 10/06/04, BIOS32 rev. 0 @ 0xfbb30
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf64
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde90/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 9 11 12
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xf400
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82865G/PE/P CPU-AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce FX 5200" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 12
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 12
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci2 at ppb1 bus 2
"Texas Instruments ACX111" rev 0x00 at pci2 dev 2 function 0 not configured
rl0 at pci2 dev 5 function 0 "Realtek 8139" rev 0x10: irq 11 address
00:04:61:77:3a:2c
rlphy0 at rl0 phy 0: RTL internal phy
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD1200JB-32EVA0>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd1 at pciide0 channel 0 drive 1: <ST380011A>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PHILIPS, DVDR1648P1, P2.2> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <AOPEN, DUW1608/ARR, A04b> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: irq
9, ICH5 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655)
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fd65 netmask fd65 ttymask fde7
pctr: user-level cycle counter enabled
ulpt0 at uhub4 port 4 configuration 1 interface 0
ulpt0: HP Photosmart 8200 series, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
umass0 at uhub4 port 4 configuration 1 interface 2
umass0: HP Photosmart 8200 series, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets
sd0 at scsibus2 targ 1 lun 0: <HP, Photosmart 8200, 1.00> SCSI2 0/direct
removable
sd0(umass0:1:0): could not get size
sd0: drive offline
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
sd0(umass0:1:0): Check Condition (error 0x70) on opcode 0x25
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
sd0(umass0:1:0): could not get size
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
cd0(pciide0:1:0): timeout
type: atapi
c_bcount: 32
c_skip: 0
pciide0:1:0: device timeout, c_bcount=32, c_skip=0,
status=0x58<DRDY,DSC,DRQ>, ireason=0x2
pciide0:1:0: Identify timed out
pciide0:1:0: soft reset failed
pciide0 channel 1: reset failed for drive 0
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
wdc_atapi_start: not ready, st = c8
cd1(atapiscsi1:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
