if i understand your question no it doesnt connect through usb port $ dmesg | grep -A 3 cdrom cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, T.02> ATAPI 5/cdrom removable ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi pci1 at ppb0 bus 1 re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 50:7b:9d:f4:e3:3c cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, T.02> ATAPI 5/cdrom removable ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi pci1 at ppb0 bus 1 re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 50:7b:9d:f4:e3:3c
On Sun, Sep 18, 2016 at 10:26 AM, Stephane HUC "PengouinPdt" <b...@stephane-huc.net> wrote: > I think you are in error. > > The doc hotplug-diskmount say: > > "When you plug USB thumb drive, insert SD card into the attached card > reader or insert CD/DVD into attached removable DVD drive filesystems > from these devices will be automatically mounted under /vol/DRIVE_NAME. > Hotplug-diskmount will mount as many partitions as disk contains." > > @George: just for be sure: your device CD-Rom is really USB? really > removable drive? > > > > On 09/18/16 06:59, Sebastien Marie wrote: >> On Sat, Sep 17, 2016 at 07:34:42PM +0300, George Pediaditis wrote: >>> Hello. >>> >>> I am trying to mount CD automatically when i insert it. >>> Hotplugd doesn't run /etc/hotplug/attach when i insert the CD. >>> It works fine with USB stick any ideas? >>> >> >> hotplugd(8) watchs for devices attachment or detachment, but a CD >> insertion is a new medium in a existing device, so no event is >> generated. >> >> For this specific problem, sysutils/toad (marked broken) was using a >> polling daemon: a program that regulary try to readlabelfs(3) from cdXc, >> and run itself the attach script. >> >> See https://github.com/ajacoutot/toad/blob/master/toadd.c for source >> code of the polling daemon. >> > > -- > <adv> ~ " Fully Basic System Distinguish Life! " ~ " Libre as a BSD " > +=<<< </adv> > ---- > <me>Stephane HUC as CIOTBSD</me> > <mail>b...@stephane-huc.net</mail>