Hey @Peter, one more time thank so much for the heads up :)

For those that interest.

I'm running OpenBSD-Current under VMware-Workstation 12 ( just need to set
processor proprieties to virtualize intel VT-x/EPT or AMD-V/RVI )

And have fun to test VMD

:)

Thank you





2016-10-22 8:43 GMT-02:00 R0me0 *** <[email protected]>:

> Hey Peter ,
>
> Thank you for the advice, I'll get current
>
> Cheers dude !
>
> (:
>
>
> 2016-10-22 6:44 GMT-02:00 Peter Hessler <[email protected]>:
>
>> This isn't expected to work at all.  That is why it was disabled.
>> You'll need to upgrade the Hypervisor to -current, or to 6.1 when it is
>> released.
>>
>>
>>
>> On 2016 Oct 22 (Sat) at 00:06:08 -0200 (-0200), R0me0 *** wrote:
>> :Hello misc.
>> :
>> :For testing purposes
>> :
>> :I compiled kernel with vmd support.
>> :
>> :After start the vm -> vmctl start "myvm" -m 512M -i 1 -d disk.img -k
>> /bsd.rd
>> :
>> :I created a bridge and added vether0 and tap0
>> :
>> :In the vm I have configured an ip 192.168.1.30
>> :
>> :If I perform ping from OpenBSD Hypervisor -> ping 192.168.1.30 all
>> packages
>> :are send and received "on the fly"
>> :
>> :But if I perform the same step from "myvm", there is no packet loss but
>> the
>> :packets take so long to be send and consecutively replied
>> :
>> :I am performing this tests on Linux  running Vmware Workstation 12 .
>> :
>> :Is this behavior expected ?
>> :
>> :Any directions will be appreciated.
>> :
>> :Thank you
>> :
>> :myvm dmesg:
>> :
>> :OpenBSD 6.0 (RAMDISK_CD) #2100: Tue Jul 26 13:05:59 MDT 2016
>> :   [email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
>> :RTC BIOS diagnostic error 20<config_unit>
>> :real mem = 520093696 (496MB)
>> :avail mem = 502673408 (479MB)
>> :mainbus0 at root
>> :bios0 at mainbus0
>> :acpi at bios0 not configured
>> :cpu0 at mainbus0: (uniprocessor)
>> :cpu0: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 14335.74 MHz
>> :cpu0:
>> :FPU,VME,DE,PSE,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,
>> PAT,PSE36,CFLUSH,DS,MMX,FXSR,SSE,SSE2,SS,SSE3,PCLMUL,SSSE3,
>> FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,AVX,F1
>> :6C,RDRAND,HV,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,ARAT
>> :pvbus0 at mainbus0: OpenBSD
>> :pci0 at mainbus0 bus 0
>> :pchb0 at pci0 dev 0 function 0 "OpenBSD VMM PCI Host Bridge" rev 0x00
>> :virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00
>> :viornd0 at virtio0
>> :virtio0: irq 3
>> :virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Storage" rev 0x00
>> :vioblk0 at virtio1
>> :scsibus0 at vioblk0: 2 targets
>> :sd0 at scsibus0 targ 0 lun 0: <VirtIO, Block Device, > SCSI3 0/direct
>> fixed
>> :sd0: 5120MB, 512 bytes/sector, 10485760 sectors
>> :virtio1: irq 5
>> :virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Network" rev 0x00
>> :vio0 at virtio2: address fe:e1:ba:d0:d0:94
>> :virtio2: irq 9
>> :isa0 at mainbus0
>> :com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
>> :com0: console
>> :softraid0 at root
>> :scsibus1 at softraid0: 256 targets
>> :root on rd0a swap on rd0b dump on rd0b
>> :WARNING: invalid time in clock chip
>> :WARNING: CHECK AND RESET THE DATE!
>> :
>> :openbsd hypervisor :
>> :
>> :
>> :OpenBSD 6.0-stable (GENERIC.MP) #0: Fri Oct 21 20:07:42 BRST 2016
>> :   [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> :real mem = 2130640896 (2031MB)
>> :avail mem = 2061631488 (1966MB)
>> :mpath0 at root
>> :scsibus0 at mpath0: 256 targets
>> :mainbus0 at root
>> :bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe0010 (242 entries)
>> :bios0: vendor Phoenix Technologies LTD version "6.00" date 07/02/2015
>> :bios0: VMware, Inc. VMware Virtual Platform
>> :acpi0 at bios0: rev 2
>> :acpi0: sleep states S0 S1 S4 S5
>> :acpi0: tables DSDT FACP BOOT APIC MCFG SRAT HPET WAET
>> :acpi0: wakeup devices PCI0(S3) USB_(S1) P2P0(S3) S1F0(S3) S2F0(S3)
>> S3F0(S3)
>> :S4F0(S3) S5F0(S3) S6F0(S3) S7F0(S3) S8F0(S3) S9F0(S3) S10F(S3) S11F(S3)
>> :S12F(S3) S13F(S3) [...]
>> :acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> :acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> :cpu0 at mainbus0: apid 0 (boot processor)
>> :cpu0: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 3800.69 MHz
>> :cpu0:
>> :FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
>> OV,PAT,PSE36,CFLUSH,DS,MMX,FXSR,SSE,SSE2,SS,HTT,SSE3,PCLMUL,
>> VMX,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLIN
>> :E,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,LONG,LAHF,ABM,PE
>> RF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
>> :
>> :cpu0: 256KB 64b/line 8-way L2 cache
>> :cpu0: smt 0, core 0, package 0
>> :mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
>> :cpu0: apic clock running at 65MHz
>> :cpu1 at mainbus0: apid 1 (application processor)
>> :cpu1: Intel(R) Core(TM) i7-4810MQ CPU @ 2.80GHz, 3810.50 MHz
>> :cpu1:
>> :FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
>> OV,PAT,PSE36,CFLUSH,DS,MMX,FXSR,SSE,SSE2,SS,HTT,SSE3,PCLMUL,
>> VMX,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLIN
>> :E,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,LONG,LAHF,ABM,PE
>> RF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
>> :
>> :cpu1: 256KB 64b/line 8-way L2 cache
>> :cpu1: smt 0, core 1, package 0
>> :ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
>> :acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127
>> :acpihpet0 at acpi0: 14318179 Hz
>> :acpiprt0 at acpi0: bus 0 (PCI0)
>> :acpicpu0 at acpi0: C1(@1 halt!)
>> :acpicpu1 at acpi0: C1(@1 halt!)
>> :"PNP0001" at acpi0 not configured
>> :"PNP0303" at acpi0 not configured
>> :"VMW0003" at acpi0 not configured
>> :"PNP0A05" at acpi0 not configured
>> :acpiac0 at acpi0: AC unit online
>> :pvbus0 at mainbus0: VMware
>> :vmt0 at pvbus0
>> :pci0 at mainbus0 bus 0
>> :pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
>> :ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
>> :pci1 at ppb0 bus 1
>> :pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
>> :pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
>> channel
>> :0 configured to compatibility, channel 1 configured to compatibility
>> :pciide0: channel 0 disabled (no drives)
>> :atapiscsi0 at pciide0 channel 1 drive 0
>> :scsibus1 at atapiscsi0: 2 targets
>> :cd0 at scsibus1 targ 0 lun 0: <NECVMWar, VMware IDE CDR10, 1.00> ATAPI
>> :5/cdrom removable
>> :cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
>> :piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x08: SMBus
>> :disabled
>> :"VMware VMCI" rev 0x10 at pci0 dev 7 function 7 not configured
>> :vga1 at pci0 dev 15 function 0 "VMware SVGA II" rev 0x00
>> :wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> :wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> :mpi0 at pci0 dev 16 function 0 "Symbios Logic 53c1030" rev 0x01: apic 2
>> int
>> :17
>> :mpi0: 0, firmware 1.3.41.32
>> :scsibus2 at mpi0: 16 targets, initiator 7
>> :sd0 at scsibus2 targ 0 lun 0: <VMware,, VMware Virtual S, 1.0> SCSI2
>> :0/direct fixed
>> :sd0: 20480MB, 512 bytes/sector, 41943040 sectors
>> :mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
>> :ppb1 at pci0 dev 17 function 0 "VMware PCI" rev 0x02
>> :pci2 at ppb1 bus 2
>> :uhci0 at pci2 dev 0 function 0 "VMware UHCI" rev 0x00: apic 2 int 18
>> :em0 at pci2 dev 1 function 0 "Intel 82545EM" rev 0x01: apic 2 int 19,
>> :address 00:0c:29:12:f6:9f
>> :ehci0 at pci2 dev 2 function 0 "VMware EHCI" rev 0x00: apic 2 int 16
>> :usb0 at ehci0: USB revision 2.0
>> :uhub0 at usb0 "VMware EHCI root hub" rev 2.00/1.00 addr 1
>> :usb1 at uhci0: USB revision 1.0
>> :uhub1 at usb1 "VMware UHCI root hub" rev 1.00/1.00 addr 1
>> :ppb2 at pci0 dev 21 function 0 "VMware PCIE" rev 0x01
>> :pci3 at ppb2 bus 3
>> :ppb3 at pci0 dev 21 function 1 "VMware PCIE" rev 0x01
>> :pci4 at ppb3 bus 4
>> :ppb4 at pci0 dev 21 function 2 "VMware PCIE" rev 0x01
>> :pci5 at ppb4 bus 5
>> :ppb5 at pci0 dev 21 function 3 "VMware PCIE" rev 0x01
>> :pci6 at ppb5 bus 6
>> :ppb6 at pci0 dev 21 function 4 "VMware PCIE" rev 0x01
>> :pci7 at ppb6 bus 7
>> :ppb7 at pci0 dev 21 function 5 "VMware PCIE" rev 0x01
>> :pci8 at ppb7 bus 8
>> :ppb8 at pci0 dev 21 function 6 "VMware PCIE" rev 0x01
>> :pci9 at ppb8 bus 9
>> :ppb9 at pci0 dev 21 function 7 "VMware PCIE" rev 0x01
>> :pci10 at ppb9 bus 10
>> :ppb10 at pci0 dev 22 function 0 "VMware PCIE" rev 0x01
>> :pci11 at ppb10 bus 11
>> :ppb11 at pci0 dev 22 function 1 "VMware PCIE" rev 0x01
>> :pci12 at ppb11 bus 12
>> :ppb12 at pci0 dev 22 function 2 "VMware PCIE" rev 0x01
>> :pci13 at ppb12 bus 13
>> :ppb13 at pci0 dev 22 function 3 "VMware PCIE" rev 0x01
>> :pci14 at ppb13 bus 14
>> :ppb14 at pci0 dev 22 function 4 "VMware PCIE" rev 0x01
>> :pci15 at ppb14 bus 15
>> :ppb15 at pci0 dev 22 function 5 "VMware PCIE" rev 0x01
>> :pci16 at ppb15 bus 16
>> :ppb16 at pci0 dev 22 function 6 "VMware PCIE" rev 0x01
>> :pci17 at ppb16 bus 17
>> :ppb17 at pci0 dev 22 function 7 "VMware PCIE" rev 0x01
>> :pci18 at ppb17 bus 18
>> :ppb18 at pci0 dev 23 function 0 "VMware PCIE" rev 0x01
>> :pci19 at ppb18 bus 19
>> :ppb19 at pci0 dev 23 function 1 "VMware PCIE" rev 0x01
>> :pci20 at ppb19 bus 20
>> :ppb20 at pci0 dev 23 function 2 "VMware PCIE" rev 0x01
>> :pci21 at ppb20 bus 21
>> :ppb21 at pci0 dev 23 function 3 "VMware PCIE" rev 0x01
>> :pci22 at ppb21 bus 22
>> :ppb22 at pci0 dev 23 function 4 "VMware PCIE" rev 0x01
>> :pci23 at ppb22 bus 23
>> :ppb23 at pci0 dev 23 function 5 "VMware PCIE" rev 0x01
>> :pci24 at ppb23 bus 24
>> :ppb24 at pci0 dev 23 function 6 "VMware PCIE" rev 0x01
>> :pci25 at ppb24 bus 25
>> :ppb25 at pci0 dev 23 function 7 "VMware PCIE" rev 0x01
>> :pci26 at ppb25 bus 26
>> :ppb26 at pci0 dev 24 function 0 "VMware PCIE" rev 0x01
>> :pci27 at ppb26 bus 27
>> :ppb27 at pci0 dev 24 function 1 "VMware PCIE" rev 0x01
>> :pci28 at ppb27 bus 28
>> :ppb28 at pci0 dev 24 function 2 "VMware PCIE" rev 0x01
>> :pci29 at ppb28 bus 29
>> :ppb29 at pci0 dev 24 function 3 "VMware PCIE" rev 0x01
>> :pci30 at ppb29 bus 30
>> :ppb30 at pci0 dev 24 function 4 "VMware PCIE" rev 0x01
>> :pci31 at ppb30 bus 31
>> :ppb31 at pci0 dev 24 function 5 "VMware PCIE" rev 0x01
>> :pci32 at ppb31 bus 32
>> :ppb32 at pci0 dev 24 function 6 "VMware PCIE" rev 0x01
>> :pci33 at ppb32 bus 33
>> :ppb33 at pci0 dev 24 function 7 "VMware PCIE" rev 0x01
>> :pci34 at ppb33 bus 34
>> :isa0 at pcib0
>> :isadma0 at isa0
>> :pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>> :pckbd0 at pckbc0 (kbd slot)
>> :wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> :pms0 at pckbc0 (aux slot)
>> :wsmouse0 at pms0 mux 0
>> :pcppi0 at isa0 port 0x61
>> :spkr0 at pcppi0
>> :vmm0 at mainbus0: VMX/EPT
>> :uhidev0 at uhub1 port 1 configuration 1 interface 0 "VMware VMware
>> Virtual
>> :USB Mouse" rev 1.10/1.02 addr 2
>> :uhidev0: iclass 3/0
>> :ums0 at uhidev0: 16 buttons, Z and W dir
>> :wsmouse1 at ums0 mux 0
>> :uhidev1 at uhub1 port 1 configuration 1 interface 1 "VMware VMware
>> Virtual
>> :USB Mouse" rev 1.10/1.02 addr 2
>> :uhidev1: iclass 3/0
>> :ums1 at uhidev1: 16 buttons, Z and W dir
>> :wsmouse2 at ums1 mux 0
>> :uhub2 at uhub1 port 2 "VMware VMware Virtual USB Hub" rev 1.10/1.00 addr
>> 3
>> :vscsi0 at root
>> :scsibus3 at vscsi0: 256 targets
>> :softraid0 at root
>> :scsibus4 at softraid0: 256 targets
>> :root on sd0a (9b5dfcf2ffc19ce3.a) swap on sd0b dump on sd0b
>> :arp: attempt to add entry for 192.168.1.30 on vether0 by
>> fe:e1:ba:d0:d0:94
>> :on tap0
>> :
>>
>> --
>> While money doesn't buy love, it puts you in a great bargaining position.

Reply via email to