Hi, I don’t really think ip forwarding is broken either as I can still
access the Internet.
# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
index 6 priority 0 llprio 3
groups: lo
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
inet 127.0.0.1 netmask 0xff000000
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 1a:cc:00:12:b1:9c
index 1 priority 0 llprio 3
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.244.1 netmask 0xffffff00 broadcast 192.168.244.255
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 1a:cc:00:12:b1:9d
index 2 priority 0 llprio 3
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
em2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 1a:cc:00:12:b1:9e
index 3 priority 0 llprio 3
media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
status: active
inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
em3: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 1a:cc:00:12:b1:9f
index 4 priority 0 llprio 3
media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
status: active
inet 192.168.3.1 netmask 0xffffff00 broadcast 192.168.3.255
enc0: flags=0<>
index 5 priority 0 llprio 3
groups: enc
status: active
pppoe0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1492
index 7 priority 0 llprio 3
dev: em0 state: session
sid: 0x69cc PADI retries: 15 PADR retries: 0 time: 4d 13:55:21
sppp: phase network authproto pap authname "lan1201210025"
groups: pppoe egress
status: active
inet 27.9.22.243 --> 27.9.20.1 netmask 0xffffffff
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33144
index 8 priority 0 llprio 3
groups: pflog
# cat /etc/pf.conf
# $OpenBSD: pf.conf,v 1.54 2014/08/23 05:49:42 deraadt Exp $
#
# See pf.conf(5) and /etc/examples/pf.conf
set skip on lo
block return # block stateless traffic
pass # establish keep-state
# By default, do not permit remote connections to X11
block return in on ! lo0 proto tcp to port 6000:6010
pass out on egress from !(egress:network) to any nat-to (egress)
> On 10 Dec 2016, at 3:16 AM, Mihai Popescu <[email protected]> wrote:
>
> What is the ifconfig configuration of your PC?
> Do you run any pf configuration on your router?
>
> I really doubt ip forwarding is broken, even on a snapshot!
