Sorry, I posted the wrong ifconfig configuration, this is the one on my Mac:
$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 78:9f:70:79:b8:5a
inet6 fe80::1c73:268c:55f4:65ef%en1 prefixlen 64 secured scopeid 0x4
inet 192.168.3.32 netmask 0xffffff00 broadcast 192.168.3.255
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
ether 38:c9:86:08:81:84
nd6 options=201<PERFORMNUD,DAD>
media: autoselect (none)
status: inactive
en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
options=60<TSO4,TSO6>
ether 2a:00:00:fa:2f:c0
media: autoselect <full-duplex>
status: inactive
en3: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
options=60<TSO4,TSO6>
ether 2a:00:00:fa:2f:c1
media: autoselect <full-duplex>
status: inactive
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
ether 0a:9f:70:79:b8:5a
media: autoselect
status: inactive
awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484
ether be:e7:72:f1:a8:96
inet6 fe80::bce7:72ff:fef1:a896%awdl0 prefixlen 64 scopeid 0x9
nd6 options=201<PERFORMNUD,DAD>
media: autoselect
status: active
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 2a:00:00:fa:2f:c0
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x2
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 6 priority 0 path cost 0
member: en3 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 7 priority 0 path cost 0
nd6 options=201<PERFORMNUD,DAD>
media: <unknown type>
status: inactive
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
inet6 fe80::98f7:b520:f58b:14dc%utun0 prefixlen 64 scopeid 0xb
nd6 options=201<PERFORMNUD,DAD>
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280
inet 10.0.0.24 --> 10.0.0.1 netmask 0xff000000
> On 10 Dec 2016, at 3:16 AM, Mihai Popescu <[email protected]> wrote:
>
> What is the ifconfig configuration of your PC?
> Do you run any pf configuration on your router?
>
> I really doubt ip forwarding is broken, even on a snapshot!
