Hello Misc, Recently tried to get my intel macbook (circa '08) dual-booting with -current amd64 (December 26 snapshot).
Within OSX I repartitioned the RootDisk and added a MS-DOS (FAT) partition for the OpenBSD install/disklabel. I booted from CD and installed to wd0 (using the OpenBSD fdisk partition). At this stage if I want to boot from wd0, I have to boot from CD and select hd0a:/bsd at the second stage boot loader. This works well enough, dmesg of the system below. When trying to boot directly from wd0 using the native EFI bootloader I placed BOOTIA32.EFI and BOOTX64.EFI in the EFI partition of the RootDisk so that I can select "EFI Partition" when booting (by holding option key). /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI 209.7 MB disk0s1 2: Apple_HFS RootDisk 118.6 GB disk0s2 3: Microsoft Basic Data 1.1 GB disk0s3 This setup gets as far as shown below and then stops... probing: pc0 mem[572K 64K 3039M 11M 60K 48K] disk: hd0 >> OpenBSD/amd64 BOOTIA32 3.32 boot> booting hd0a:/bsd: 6979304+2212872+258624+0+765952 [72+710280+477696]=0xae2350 entry point at 0xf001000 [7205c766, 34000004, 24448b12, 1240a304] I've tried booting with `boot> hd0a:/bsd.rd'. Also tried writing install60.tgz and miniroot60.tgz to USB and got similar results there as well. Curious to know if the native EFI bootloader is designed to work with this hardware? Thanks, dmesg output: OpenBSD 6.0-current (GENERIC.MP) #73: Mon Dec 26 23:25:48 MST 2016 [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3171909632 (3024MB) avail mem = 3071180800 (2928MB) warning: no entropy supplied by boot loader mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0000 (37 entries) bios0: vendor Apple Inc. version "MB21.88Z.00A5.B07.0706270922" date 06/27/07 bios0: Apple Inc. MacBook2,1 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT acpi0: wakeup devices ADP1(S3) LID0(S3) PXS1(S4) PXS2(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) EC__(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz, 2161.65 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM 2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR cpu0: 4MB 64b/line 16-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 166MHz cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz, 2161.25 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM 2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR cpu1: 4MB 64b/line 16-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf0000000, bus 0-255 acpiec0 at acpi0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (RP01) acpiprt2 at acpi0: bus 2 (RP02) acpiprt3 at acpi0: bus 3 (PCIB) acpicpu0 at acpi0: !C3(100@55 mwait@0x31), !C2(500@1 mwait@0x10), C1(1000@1 mwait), PSS acpicpu1 at acpi0: !C3(100@55 mwait@0x31), !C2(500@1 mwait@0x10), C1(1000@1 mwait), PSS acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: LID0 "APP0002" at acpi0 not configured acpibtn1 at acpi0: PWRB acpibtn2 at acpi0: SLPB "APP0001" at acpi0 not configured "APP0003" at acpi0 not configured "ACPI0002" at acpi0 not configured acpibat0 at acpi0: BAT0 model "15253732082930497" type 15253732284385612 oem "15253732284387396" acpivideo0 at acpi0: GFX0 cpu0: Enhanced SpeedStep 2161 MHz: speeds: 2167, 2000, 1833, 1667, 1500, 1333, 1000 MHz memory map conflict 0xbef00000/0x100000 memory map conflict 0xbf000000/0x1000000 memory map conflict 0xf00f8000/0x1000 memory map conflict 0xfed1c000/0x4000 memory map conflict 0xfffb0000/0x30000 pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0: apic 1 int 16 inteldrm0: 1280x800 wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and Frequency, rev 0x03) at pci0 dev 7 function 0 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi azalia0: codecs: Sigmatel STAC9220/1 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi pci1 at ppb0 bus 1 mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22, Yukon-2 EC rev. A3 (0x2): apic 1 int 16 msk0 at mskc0 port A: address 00:19:e3:3d:46:17 eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi pci2 at ppb1 bus 2 athn0 at pci2 dev 0 function 0 "Atheros AR5418" rev 0x01: apic 1 int 17 athn0: MAC AR5418 rev 2, RF AR5133 (2T3R), ROM rev 4, address 00:1b:63:c5:77:67 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 21 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 21 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci3 at ppb2 bus 3 "AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-R UJ-857E, ZB0E> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 1 int 19 for native-PCI interrupt wd0 at pciide1 channel 0 drive 1: <KINGSTON SKC300S37A120G> wd0: 1-sector PIO, LBA48, 114473MB, 234441648 sectors wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19 iic0 at ichiic0 iic0: addr 0x48 00=2e 01=00 02=4b 03=50 words 00=2e00 01=00ff 02=4b00 03=5000 04=ffff 05=ffff 06=ffff 07=ffff spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM spdmem1 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 asmc0 at isa0 port 0x300/32: rev 1.17f517, 226 keys vmm0 at mainbus0: VMX drm: render error detected, EIR: 0x00000010 drm: page table error drm: PGTBL_ER: 0x00000102 error: [drm:pid0:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking drm: render error detected, EIR: 0x00000010 drm: page table error drm: PGTBL_ER: 0x00000102 umass0 at uhub0 port 3 configuration 1 interface 0 "Lexar USB Flash Drive" rev 2.00/11.00 addr 2 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd0 at scsibus2 targ 1 lun 0: <Lexar, JD FireFly, 1100> SCSI0 0/direct removable serial.05dca810N1HZPKUEG7GM sd0: 3824MB, 512 bytes/sector, 7831552 sectors ugen0 at uhub0 port 4 "Micron Built-in iSight" rev 2.00/1.89 addr 3 uhidev0 at uhub1 port 2 configuration 1 interface 0 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 5 key codes, country code 33 wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub1 port 2 configuration 1 interface 1 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2 uhidev1: iclass 3/1, 5 report ids ums0 at uhidev1 reportid 2: 3 buttons wsmouse0 at ums0 mux 0 ums1 at uhidev1 reportid 5 ums1: mouse has no X report uhidev2 at uhub1 port 2 configuration 1 interface 2 "Apple Computer Apple Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2 uhidev2: iclass 3/0 uhid0 at uhidev2: input=1, output=0, feature=0 uhidev3 at uhub3 port 2 configuration 1 interface 0 "Apple Computer, Inc. IR Receiver" rev 2.00/1.10 addr 2 uhidev3: iclass 3/0, 38 report ids uhid1 at uhidev3 reportid 36: input=4, output=0, feature=0 uhid2 at uhidev3 reportid 37: input=4, output=0, feature=0 uhid3 at uhidev3 reportid 38: input=4, output=0, feature=0 uhidev4 at uhub4 port 1 configuration 1 interface 0 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2 uhidev4: iclass 3/1 ukbd1 at uhidev4: 8 variable keys, 6 key codes wskbd1 at ukbd1 mux 1 wskbd1: connecting to wsdisplay0 uhidev5 at uhub4 port 1 configuration 1 interface 1 "Apple Computer HID-proxy" rev 2.00/19.65 addr 2 uhidev5: iclass 3/1 ums2 at uhidev5: 5 buttons wsmouse1 at ums2 mux 0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on wd0a (157fa0187fd41f4c.a) swap on wd0b dump on wd0b fdisk output: Disk: wd0 geometry: 14593/255/63 [234441648 Sectors] Offset: 0 Signature: 0xAA55 Starting Ending LBA Info: #: id C H S - C H S [ start: size ] ----------------------------------------------------------------------------- -- 0: EE 0 0 2 - 25 127 14 [ 1: 409639 ] EFI GPT 1: AF 25 127 15 - 14446 116 54 [ 409640: 231672712 ] MacOS X HFS+ *2: A6 14462 215 26 - 14593 66 1 [ 232345600: 2095104 ] OpenBSD 3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused -- Byron Klippert [email protected] c. 867-336-1306
