Thanks for the report. The speed of scrolling is indeed independent of the scale factor. Internally, these are distinct settings. (I've been vaguely considering to couple them, but there is nothing settled yet; it might be a bad idea if the initial values don't match).
As to the pointer movement, there is still the option of increasing the "acceleration factor" of X. That's not the same as changing the base speed, you might want to check which option is better for you. If the base speed is too high, you may have difficulties to move the pointer with "pixel precision". If the acceleration factor is too high, you may have difficulties to predict the pointer speed that results from normal or higher input speed. On 08/03/2017 10:21 AM, Henrik Friedrichsen wrote: > No apparent problems here on my ThinkPad x220i. > > Base pointer speed was slightly slower which I was able to adjust by > setting mouse.tp.scaling. This did, however, not affect the > two-finger-scrolling, which required more mileage on my trackpad to > scroll compared to the synaptics driver. > > Nice work! > > wsconsctl: > mouse.type=synaptics > mouse.rawmode=0 > mouse.scale=1472,5472,1408,4448,0,75,129 > mouse.tp.tapping=0 > mouse.tp.scaling=0.200 > mouse.tp.swapsides=0 > mouse.tp.disable=0 > > dmesg: > OpenBSD 6.1-current (GENERIC.MP) #34: Tue Aug 1 18:56:18 MDT 2017 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8451125248 (8059MB) > avail mem = 8188628992 (7809MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (66 entries) > bios0: vendor LENOVO version "8DET73WW (1.43 )" date 10/12/2016 > bios0: LENOVO 4290W1A > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA > SSDT SSDT UEFI UEFI UEFI > acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) > EHC2(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz, 2093.51 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: TSC frequency 2093506380 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz, 2093.20 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz, 2093.20 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz, 2093.20 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG_) > acpiprt2 at acpi0: bus 2 (EXP1) > acpiprt3 at acpi0: bus 3 (EXP2) > acpiprt4 at acpi0: bus 5 (EXP4) > acpiprt5 at acpi0: bus 13 (EXP5) > acpiprt6 at acpi0: bus -1 (EXP7) > acpicpu0 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1 > halt), PSS > acpicpu1 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1 > halt), PSS > acpicpu2 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1 > halt), PSS > acpicpu3 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1 > halt), PSS > acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2 > acpitz0 at acpi0: critical temperature is 99 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > "PNP0303" at acpi0 not configured > "LEN0020" at acpi0 not configured > "SMO1200" at acpi0 not configured > acpibat0 at acpi0: BAT0 model "42T4861" serial 5714 type LION oem "SANYO" > acpiac0 at acpi0: AC unit offline > acpithinkpad0 at acpi0 > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > acpidock0 at acpi0: GDCK not docked (0) > acpivideo0 at acpi0: VID_ > acpivout at acpivideo0 not configured > acpivideo1 at acpi0: VID_ > cpu0: Enhanced SpeedStep 2093 MHz: speeds: 2100, 2000, 1900, 1800, 1700, > 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1366x768, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > f0:de:f1:5a:e0:f6 > ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi > azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi > pci1 at ppb0 bus 2 > ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi > pci2 at ppb1 bus 3 > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi, > MIMO 2T2R, MoW, address a0:88:b4:40:98:3c > ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi > pci3 at ppb2 bus 5 > ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi > pci4 at ppb3 bus 13 > sdhc0 at pci4 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 16 > sdhc0: SDHC 3.0, 50 MHz base clock > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, AHCI 1.3 > ahci0: port 0: 3.0Gb/s > ahci0: port 2: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS54323, ES2Z> SCSI3 0/direct > fixed naa.5000cca615d81cfc > sd0: 305245MB, 512 bytes/sector, 625142448 sectors > sd1 at scsibus1 targ 2 lun 0: <ATA, M4-CT256M4SSD3, 07MH> SCSI3 0/direct > fixed naa.500a07510357813b > sd1: 244198MB, 512 bytes/sector, 500118192 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.0, 0x1e2b1 0x940300 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > aps0 at isa0 port 0x1600/31 > vmm0 at mainbus0: VMX/EPT > efifb at mainbus0 not configured > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3 > ugen1 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev 2.00/7.48 > addr 4 > uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co., > Ltd. Integrated Camera" rev 2.00/8.54 addr 5 > video0 at uvideo0 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd1a (7fc50ab79808dfe6.a) swap on sd1b dump on sd1b > /dev/sd0i: file system not clean; please fsck(8) > ugen0 detached > ugen1 detached > video0 detached > uvideo0 detached > uhub2 detached > uhub0 detached > uhub3 detached > uhub1 detached > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3 > ugen1 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev 2.00/7.48 > addr 4 > uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics Co., > Ltd. Integrated Camera" rev 2.00/8.54 addr 5 > video0 at uvideo0 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > >
