On my Thinkpad X1 Carbon (first gen, I think) it looks pretty good. The
only thing in xorg.conf is your proposed block.
Cursor moves: Yes
Pad tapping: Yes, honours enable/disable
Pad speed/scaling: Honours setting
Swapsides: not honoured
Regardless of setting, the scroll bar moves in sync with fingers (ie
fingers away from me makes scroll bar go up / sends the page down)
Looking at `xinput --test /dev/wsmouse0` I see button 4 scrolling up and
5 scrolling down, either way.
wsconsctl output:
$ wsconsctl mouse
wsconsctl: /dev/wsmouse0: Permission denied
$ wsconsctl | grep mouse
wsconsctl: /dev/wskbd0: Permission denied
wsconsctl: /dev/wsmouse0: Permission denied
wsconsctl: /dev/ttyC0: Permission denied
$ doas wsconsctl | grep mouse
wsconsctl: Use explicit arg to view keyboard.map.
mouse.type=synaptics
mouse.rawmode=0
mouse.scale=1472,5678,1408,4732,0,46,63
mouse.tp.tapping=0
mouse.tp.scaling=0.200
mouse.tp.swapsides=1
mouse.tp.disable=0
mouse1.type=ps2
$
dmesg:
OpenBSD 6.1-current (GENERIC.MP) #34: Tue Aug 1 18:56:18 MDT 2017
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8383655936 (7995MB)
avail mem = 8123219968 (7746MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries)
bios0: vendor LENOVO version "G6ET96WW (2.56 )" date 04/29/2013
bios0: LENOVO 34486T7
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT
ASF! UEFI UEFI MSDM SSDT SSDT DMAR UEFI SSDT DBG2 BGRT
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3)
EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1796.26 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,D
EADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 1796264010 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1795.92 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,D
EADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1795.92 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,D
EADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz, 1795.92 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,D
EADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
acpitz0 at acpi0: critical temperature is 200 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"MSFT9000" at acpi0 not configured
"MSFT9001" at acpi0 not configured
"LEN0071" at acpi0 not configured
"LEN0030" at acpi0 not configured
"SMO1200" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1071" serial 9485 type LiP oem "SMP"
acpiac0 at acpi0: AC unit offline
"LEN0078" at acpi0 not configured
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A0" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 1796 MHz: speeds: 1801, 1800, 1700, 1600, 1500,
1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 2
sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x96:
msi, MIMO 2T2R, MoW, address 84:3a:4b:cf:7e:e4
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QS77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SD5SG212, 10.0> SCSI3
0/direct fixed naa.5001b449df708c96
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
ugen0 at uhub3 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 3
uvideo0 at uhub3 port 6 configuration 1 interface 0 "SunplusIT INC.
Integrated Camera" rev 2.00/14.12 addr 4
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 102399MB, 512 bytes/sector, 209713649 sectors
root on sd1a (e82efb9b90975aa4.a) swap on sd1b dump on sd1b
umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Cruzer
Switch" rev 2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd2 at scsibus4 targ 1 lun 0: <SanDisk, Cruzer Switch, 1.00> SCSI4
0/direct removable serial.07815572220417119075
sd2: 7632MB, 512 bytes/sector, 15630336 sectors
On 08/01/17 07:02, Ulf Brosziewski wrote:
> In the long run the synaptics driver, which handles touchpad inputs in
> X, may be a dead end of the input framework, and it's time to prepare
> an alternative. The kernel contains an internal touchpad input driver
> now, it's a part of wsmouse(4). It provides standard features -
> two-finger/edge scrolling, software buttons for clickpads, tapping -
> and various kinds of plankton required for usability.
>
> If you have a new snapshot (from July 27 or later) on a laptop with a
> Synaptics, Apple, Alps, or Elantech-4 touchpad, you could help with
> tests, more tests, and tests. In order to activate the driver, add the
> following entry to /etc/xorg.conf and restart X (if the file isn't
> present, simply create it with this content):
>
> Section "InputClass"
> Identifier "wsmouse touchpad"
> Driver "ws"
> MatchIsTouchpad "on"
> EndSection
>
> While I dont't expect bugs in the input processing part of the
> driver ;-), it is difficult to assess how well the automatic
> configuration covers the zoo of models out there, presumably it will
> need some more fine-grained distinctions of hardware properties. I
> would like to know where it works, works only halfway, or doesn't work
> for you. As always, a dmesg would be appreciated. The output of
> # wsconsctl | grep 'mouse'
> could also be of interest here (you must run it as root).
>
> For now, X will treat the device like a mouse, please don't look for
> touchpad-specific configuration options there. Tapping can be enabled
> by the command
> # wsconsctl mouse.tp.tapping=1
> If there is more than one wsmouse device, you should look up which one
> has the "tp" fields and if it's not the first one (wsmouse0), add the
> index to the prefix, e.g.
> # wsconsctl mouse2.tp.tapping=1
>
> The base speed of the pointer can be adjusted by increasing or
> decreasing the value of
> # wsconsctl mouse.tp.scaling
> Please don't confuse it with the 'mouse.scale' field.
>
> # wsconsctl mouse.tp.swapsides=1
> will invert the order of software buttons areas (swapping external
> buttons must still be configured in X). If edge scrolling is
> enabled, the scroll area will be at the left edge of the touchpad.
>
> If you are using an external mouse device or a trackpoint, the command
> # wsconsctl mouse.tp.disable=1
> may be helpful. It will disable pointer movement, scrolling, and
> tapping. External buttons and software buttons remain enabled.
>
