For about a month now I have been trying to get my Ralink PCI card
working under OpenBSD - I have had it working under FreeBSD, but could
not get my wireless mouse working there. I a last effort to figure out
why Ralink isn't working on my Fujitsu-Siemens Amilo L7300 laptop I have
to ask the list: How can I get the card working?
Have Googled and the only answer I find is: "This should not happen"
when searching for my error message: "ral0:device timeout"
I enclose dmesg and ifconfig ral0.
Ifconfig ral0: "ral0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
mtu 1500
lladdr 00:14:a5:0b:85:2b
media: IEEE802.11 autoselect (DS1 mode 11g)
status: no network
ieee80211: nwid myhome nwkey 0xmystring 100dBm
inet 192.168.2.10 netmask 0xffffff00 broadcast 192.168.2.255
inet6 fe80::214:a5ff:fe0b:852b%ral0 prefixlen 64 scopeid 0x1"
dmesg:
"OpenBSD 3.9-beta (GENERIC) #0: Sun Jan 22 20:31:54 CET 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.50GHz ("GenuineIntel" 686-class)
1.50 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 468230144 (457256K)
avail mem = 420065280 (410220K)
using 4278 buffers containing 23515136 bytes (22964K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(a9) BIOS, date 05/06/05, BIOS32 rev. 0 @ 0xfd7a0
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf50/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xf400 0xd0000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA PM800 AGP" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA PM800 Errors" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA PM800 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PM800 DRAM" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA PM800 PMC" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA PM800 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA PM800 Unichrome S3" rev 0x02:
aperture at 0xf0000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ral0 at pci0 dev 6 function 0 "Ralink RT2560" rev 0x01: irq 11, address
00:14:a5:0b:85:2b
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
cbb0 at pci0 dev 12 function 0 "ENE CB-1410 CardBus" rev 0x01: irq 10
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 7
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST9808210A>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD+-RW ND-6650A, 1.42> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 11
ac97: codec id 0x414c4760 (Avance Logic ALC655)
audio0 at auvia0
"VIA VT82C686 Modem" rev 0x80 at pci0 dev 17 function 6 not configured
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 7, address
00:40:ca:d3:ff:43
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x00000a, model 0x4063
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x40
pcmcia0 at cardslot0
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft Wireless Optical Desktop\M-. 1.00, rev
2.00/18.17, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1
uhidev1: Microsoft Microsoft Wireless Optical Desktop\M-. 1.00, rev
2.00/18.17, addr 2, iclass 3/0
uhidev1: 4 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=5, output=0, feature=0
uhid2 at uhidev1 reportid 4: input=1, output=0, feature=0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: <USB MF> <USB PRODUCT>, rev 1.10/10.01, addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <MSI, MS-551X, 0100> SCSI4 0/direct removable
sd0: 246MB, 246 cyl, 64 head, 32 sec, 512 bytes/sec, 503808 sec total"
