On Sat, Mar 17, 2018 at 10:40:55PM +0100, Robert wrote: > Since about two weeks the X server keeps crashing (segfault) most of the > time when I start it (through xenodm). > I have to restart it (rcctl restart xenodm) about 5-10 times > until I get an (xfce) session that stays stable. > > I reinstalled today with the latest current/amd64, and now this issue became > worse: In addition, even when I get a stable session, it crashes as > soon as I do some actions, such as moving the mouse for a couple of > seconds or starting Firefox.
How long since you did an update before you started having problems? I had a similar situation some time ago on one of my current- machines that I hadn't updated in a long time. Check the upgrade guides: https://www.openbsd.org/faq/upgrade62.html https://www.openbsd.org/faq/upgrade61.html And so on. And/or install sysclean(1) and have a look at its output. Between upgrades I usually run: # pkg_delete -[n]a (-n being dry mode to see any changes without actually removing things.) You may also take a look at pkg_check but read the man page first. Best regards, Erling > Xorg.log says (from various such occurences): > (EE) Segmentation fault at address 0x64bfcd81018 > (EE) Segmentation fault at address 0x17e082969018 > (EE) Segmentation fault at address 0x78e6159b000 > > Any ideas / recommendations on how to debug or fix this? > (dmesg / xorg log below) > > Installing 6.2/amd64 removes the issue, so I don't think it's a hardware > problem. > > If it is relevant, this is an AMD Verde GPU, where the driver uses > software rendering. Also, I disabled xhci in the kernel (using config) due to > https://marc.info/?l=openbsd-misc&m=143442925331480 . > > regards, > Robert > > > dmesg (current > OpenBSD 6.3 (GENERIC.MP) #68: Fri Mar 16 01:24:47 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 17113550848 (16320MB) > avail mem = 16587821056 (15819MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec380 (81 entries) > bios0: vendor Dell Inc. version "A15" date 02/15/2017 > bios0: Dell Inc. OptiPlex 3020 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC FPDT SLIC SSDT SSDT SSDT HPET SSDT MCFG SSDT > acpi0: wakeup devices PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4) PXSX(S4) RP04(S4) > PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S0) > EHC2(S0) XHC_(S0) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz, 3492.35 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > acpitimer0: recalibrated TSC frequency 3292383348 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz, 3491.93 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz, 3491.93 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT,MELTDOWN > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz, 3491.93 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT,MELTDOWN > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > acpihpet0 at acpi0: 14318179 Hz > acpihpet0: recalibrated TSC frequency 3292372366 Hz > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (RP01) > acpiprt2 at acpi0: bus 3 (RP04) > acpiprt3 at acpi0: bus 4 (RP05) > acpiprt4 at acpi0: bus 5 (RP06) > acpiprt5 at acpi0: bus 1 (PEG0) > acpiprt6 at acpi0: bus -1 (PEG1) > acpiprt7 at acpi0: bus -1 (PEG2) > acpiec0 at acpi0: not present > acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: FN00, resource for FAN0 > acpipwrres1 at acpi0: FN01, resource for FAN1 > acpipwrres2 at acpi0: FN02, resource for FAN2 > acpipwrres3 at acpi0: FN03, resource for FAN3 > acpipwrres4 at acpi0: FN04, resource for FAN4 > acpitz0 at acpi0: critical temperature is 105 degC > acpitz1 at acpi0: critical temperature is 105 degC > "INT3F0D" at acpi0 not configured > acpibtn0 at acpi0: PWRB > "PNP0C14" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > "PNP0C0B" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: Enhanced SpeedStep 3492 MHz: speeds: 3301, 3300, 3100, 2900, 2800, > 2600, 2400, 2200, 2000, 1900, 1700, 1500, 1300, 1200, 1000, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06 > ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi > pci1 at ppb0 bus 1 > radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 7750" rev 0x00 > drm0 at radeondrm0 > radeondrm0: msi > azalia0 at pci1 dev 0 function 1 vendor "ATI", unknown product 0xaab0 rev > 0x00: msi > azalia0: no supported codecs > "Intel 8 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured > "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > ppb1 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4: msi > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xd4: msi > pci3 at ppb2 bus 3 > re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G > (0x4c00), msi, address f8:bc:12:9e:dd:36 > rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0 > ppb3 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xd4: msi > pci4 at ppb3 bus 4 > em0 at pci4 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address > 68:05:ca:2b:52:0c > ppb4 at pci0 dev 28 function 5 "Intel 8 Series PCIE" rev 0xd4: msi > pci5 at ppb4 bus 5 > em1 at pci5 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address > 68:05:ca:2b:2b:cf > ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > pcib0 at pci0 dev 31 function 0 "Intel H81 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > ahci0: port 5: 1.5Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 850, EXM0> SCSI3 0/direct > fixed naa.500253887000c4c1 > sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin > cd0 at scsibus1 targ 5 lun 0: <HL-DT-ST, DVD+-RW GHB0N, A100> ATAPI 5/cdrom > removable > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 8 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 > spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.04 addr 2 > uaudio0 at uhub2 port 2 configuration 1 interface 0 "Creative Technology Ltd > Sound Blaster Play! 2" rev 2.00/10.01 addr 3 > uaudio0: audio rev 1.00, 6 mixer controls > audio0 at uaudio0 > uhidev0 at uhub2 port 2 configuration 1 interface 3 "Creative Technology Ltd > Sound Blaster Play! 2" rev 2.00/10.01 addr 3 > uhidev0: iclass 3/0, 9 report ids > uhid0 at uhidev0 reportid 1: input=1, output=0, feature=0 > uhid1 at uhidev0 reportid 2: input=2, output=1, feature=0 > uhid2 at uhidev0 reportid 8: input=0, output=5, feature=0 > uhid3 at uhidev0 reportid 9: input=2, output=0, feature=0 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.04 addr 2 > uhidev1 at uhub3 port 3 configuration 1 interface 0 "Cherry Mikroschalter > product 0x010d" rev 2.00/1.00 addr 3 > uhidev1: iclass 3/1 > ukbd0 at uhidev1: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > uhidev2 at uhub3 port 3 configuration 1 interface 1 "Cherry Mikroschalter > product 0x010d" rev 2.00/1.00 addr 3 > uhidev2: iclass 3/0 > uhid4 at uhidev2: input=2, output=0, feature=0 > uhidev3 at uhub3 port 4 configuration 1 interface 0 "SIGMACHIP Usb Mouse" rev > 1.10/1.10 addr 4 > uhidev3: iclass 3/1 > ums0 at uhidev3: 5 buttons, Z dir > wsmouse0 at ums0 mux 0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed > sd1: 102406MB, 512 bytes/sector, 209727983 sectors > root on sd1a (1ccccccccccccccc.a) swap on sd1b dump on sd1b > radeondrm0: 1024x768, 32bpp > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wskbd1: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > > Xorg.log: > [ 26.707] (--) checkDevMem: using aperture driver /dev/xf86 > [ 26.725] (--) Using wscons driver on /dev/ttyC4 > [ 26.732] > X.Org X Server 1.19.6 > Release Date: 2017-12-20 > [ 26.732] X Protocol Version 11, Revision 0 > [ 26.732] Build Operating System: OpenBSD 6.3 amd64 > [ 26.732] Current Operating System: OpenBSD pcc.abc.test 6.3 GENERIC.MP#68 > amd64 > [ 26.733] Build Date: 16 March 2018 01:41:48AM > [ 26.733] > [ 26.733] Current version of pixman: 0.34.0 > [ 26.733] Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > [ 26.733] Markers: (--) probed, (**) from config file, (==) default > setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > [ 26.733] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 17 20:52:30 > 2018 > [ 26.734] (==) Using config file: "/etc/X11/xorg.conf" > [ 26.734] (==) Using system config directory > "/usr/X11R6/share/X11/xorg.conf.d" > [ 26.735] (==) ServerLayout "layout0" > [ 26.735] (**) |-->Screen "screen0" (0) > [ 26.735] (**) | |-->Monitor "monitor0" > [ 26.735] (**) | |-->Device "device0" > [ 26.735] (**) |-->Screen "screen1" (1) > [ 26.735] (**) | |-->Monitor "monitor1" > [ 26.735] (**) | |-->Device "device1" > [ 26.735] (**) Option "Xinerama" "true" > [ 26.735] (==) Automatically adding devices > [ 26.735] (==) Automatically enabling devices > [ 26.735] (==) Not automatically adding GPU devices > [ 26.736] (**) Xinerama: enabled > [ 26.736] (==) Max clients allowed: 256, resource mask: 0x1fffff > [ 26.741] (==) FontPath set to: > /usr/X11R6/lib/X11/fonts/misc/, > /usr/X11R6/lib/X11/fonts/TTF/, > /usr/X11R6/lib/X11/fonts/OTF/, > /usr/X11R6/lib/X11/fonts/Type1/, > /usr/X11R6/lib/X11/fonts/100dpi/, > /usr/X11R6/lib/X11/fonts/75dpi/ > [ 26.741] (==) ModulePath set to "/usr/X11R6/lib/modules" > [ 26.741] (II) The server relies on wscons to provide the list of input > devices. > If no devices become available, reconfigure wscons or disable > AutoAddDevices. > [ 26.741] (II) Loader magic: 0x649fad42000 > [ 26.741] (II) Module ABI versions: > [ 26.741] X.Org ANSI C Emulation: 0.4 > [ 26.741] X.Org Video Driver: 23.0 > [ 26.741] X.Org XInput driver : 24.1 > [ 26.741] X.Org Server Extension : 10.0 > [ 26.742] (--) PCI:*(0:1:0:0) 1002:683f:1787:7250 rev 0, Mem @ > 0xe0000000/268435456, 0xf7e00000/262144, I/O @ 0x0000e000/256, BIOS @ > 0x????????/131072 > [ 26.742] (II) LoadModule: "glx" > [ 26.743] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so > [ 26.753] (II) Module glx: vendor="X.Org Foundation" > [ 26.753] compiled for 1.19.6, module version = 1.0.0 > [ 26.753] ABI class: X.Org Server Extension, version 10.0 > [ 26.753] (II) LoadModule: "radeon" > [ 26.753] (II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.so > [ 26.755] (II) Module radeon: vendor="X.Org Foundation" > [ 26.755] compiled for 1.19.6, module version = 18.0.0 > [ 26.755] Module class: X.Org Video Driver > [ 26.755] ABI class: X.Org Video Driver, version 23.0 > [ 26.755] (II) RADEON: Driver for ATI/AMD Radeon chipsets: > ATI Radeon Mobility X600 (M24), ATI FireMV 2400, > ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL, > ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380), > ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4), > ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE, > ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE, > ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360, > ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW, > ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2), > ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000, > ATI Radeon X800 (R420), ATI Radeon X800PRO (R420), > ATI Radeon X800SE (R420), ATI FireGL X3 (R420), > ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420), > ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420), > ATI Radeon X850 (R480), ATI Radeon X850 XT (R480), > ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480), > ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7, > ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6, > ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9), > ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1, > ATI Radeon 9800PRO, ATI Radeon 9800XT, > ATI Radeon Mobility 9600/9700 (M10/M11), > ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11), > ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11), > ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100, > ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000, > ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C), > ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423), > ATI Radeon X800LE (R423), ATI Radeon X800SE (R423), > ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430), > ATI Radeon X800 SE (R430), ATI Radeon X800 (R430), > ATI FireGL V7100 (R423), ATI FireGL V5100 (R423), > ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26), > ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26), > ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5), > ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200, > ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200, > ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370), > ATI Radeon X600 (RV370), ATI Radeon X550 (RV370), > ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370), > ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28), > ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28), > ATI Radeon X850, ATI unknown Radeon / FireGL (R480), > ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410), > ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410), > ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410), > ATI Radeon X1800, ATI Mobility Radeon X1800 XT, > ATI Mobility Radeon X1800, ATI Mobility FireGL V7200, > ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100, > ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505, > ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL, > ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit, > ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300, > ATI FireGL V3350, ATI Mobility Radeon X1450, > ATI Mobility Radeon X2300, ATI Mobility Radeon X1350, > ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200, > ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro, > ATI FireGL V3400, ATI Mobility FireGL V5250, > ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT, > ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300, > ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor, > ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570, > ATI FireGL V7400, ATI Radeon 9100 PRO IGP, > ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740, > ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, > ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600, > ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2, > ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL), > ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850, > ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770, > AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL), > ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98, > ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650, > ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670, > ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600, > ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650], > ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL), > ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830, > ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740, > ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610, > ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro, > ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350, > ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400, > ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870, > ATI Mobility Radeon HD 3850, ATI Radeon HD3850, > ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870, > ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2, > ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170, > ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350, > ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series, > ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630, > ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT, > ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP, > ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630, > ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600, > ATI FireGL V3600, ATI Radeon HD 2600 LE, > ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470, > ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series, > ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700, > ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP, > ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT, > ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670, > ATI Mobility FireGL V5700, ATI Mobility FireGL V5725, > ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics, > ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2, > ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200, > ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250, > AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics, > AMD Radeon HD 6300 Series Graphics, > AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS, > ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370, > AMD Firestream 9350, ATI Radeon HD 5800 Series, > ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series, > ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series, > ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570, > ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series, > REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270, > ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series, > AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS, > AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS, > ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI, > MULLINS, KAVERI, HAWAII > [ 26.758] (II) [KMS] Kernel modesetting enabled. > [ 26.759] (II) [KMS] Kernel modesetting enabled. > [ 26.759] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 > [ 26.759] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp > pixmaps) > [ 26.759] (==) RADEON(0): Default visual is TrueColor > [ 26.760] (==) RADEON(0): RGB weight 888 > [ 26.760] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) > [ 26.760] (--) RADEON(0): Chipset: "VERDE" (ChipID = 0x683f) > [ 26.760] (II) Loading sub module "fb" > [ 26.760] (II) LoadModule: "fb" > [ 26.761] (II) Loading /usr/X11R6/lib/modules/libfb.so > [ 26.762] (II) Module fb: vendor="X.Org Foundation" > [ 26.762] compiled for 1.19.6, module version = 1.0.0 > [ 26.762] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 26.762] (II) Loading sub module "dri2" > [ 26.762] (II) LoadModule: "dri2" > [ 26.762] (II) Module "dri2" already built-in > [ 26.762] (II) Loading sub module "glamoregl" > [ 26.762] (II) LoadModule: "glamoregl" > [ 26.763] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so > [ 26.775] (II) Module glamoregl: vendor="X.Org Foundation" > [ 26.775] compiled for 1.19.6, module version = 1.0.0 > [ 26.775] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 26.775] (II) glamor: OpenGL accelerated X.org driver based. > [ 26.798] (II) glamor: EGL version 1.4 (DRI2): > [ 26.798] EGL_MESA_drm_image required. > [ 26.799] (EE) RADEON(0): glamor detected, failed to initialize EGL. > [ 26.799] (II) Loading sub module "shadow" > [ 26.799] (II) LoadModule: "shadow" > [ 26.800] (II) Loading /usr/X11R6/lib/modules/libshadow.so > [ 26.800] (II) Module shadow: vendor="X.Org Foundation" > [ 26.800] compiled for 1.19.6, module version = 1.1.0 > [ 26.800] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 26.800] (II) RADEON(0): KMS Color Tiling: disabled > [ 26.800] (II) RADEON(0): KMS Color Tiling 2D: disabled > [ 26.800] (II) RADEON(0): KMS Pageflipping: enabled > [ 26.800] (II) RADEON(0): SwapBuffers wait for vsync: enabled > [ 26.832] (II) RADEON(0): Output DisplayPort-0 using monitor section > monitor0 > [ 26.899] (II) RADEON(0): EDID for output DisplayPort-0 > [ 26.899] (II) RADEON(0): Printing probed modes for output DisplayPort-0 > [ 26.899] (II) RADEON(0): Modeline "2560x1440"x60.0 241.50 2560 2608 > 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz UP) > [ 26.899] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 > 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) > [ 26.899] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 > 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) > [ 26.899] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 > 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) > [ 26.899] (II) RADEON(0): Modeline "848x480"x60.0 33.75 848 864 976 > 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) > [ 26.899] (II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 > 480 490 492 525 -hsync -vsync (31.5 kHz e) > [ 26.899] (II) RADEON(0): Output DisplayPort-0 connected > [ 26.899] (II) RADEON(0): Using user preference for initial modes > [ 26.899] (II) RADEON(0): Output DisplayPort-0 using initial mode > 2560x1440 +0+0 > [ 26.899] (II) RADEON(0): mem size init: gart size :1fbdf000 vram size: > s:80000000 visible:7fcc0000 > [ 26.899] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM > [ 26.899] (==) RADEON(0): DPI set to (96, 96) > [ 26.899] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) > [ 26.899] (II) Loading sub module "ramdac" > [ 26.899] (II) LoadModule: "ramdac" > [ 26.899] (II) Module "ramdac" already built-in > [ 26.899] (==) RADEON(1): Depth 24, (--) framebuffer bpp 32 > [ 26.899] (II) RADEON(1): Pixel depth = 24 bits stored in 4 bytes (32 bpp > pixmaps) > [ 26.899] (==) RADEON(1): Default visual is TrueColor > [ 26.899] (==) RADEON(1): RGB weight 888 > [ 26.899] (II) RADEON(1): Using 8 bits per RGB (8 bit DAC) > [ 26.899] (--) RADEON(1): Chipset: "VERDE" (ChipID = 0x683f) > [ 26.899] (II) RADEON(1): reusing fd for second head > [ 26.899] (II) Loading sub module "fb" > [ 26.899] (II) LoadModule: "fb" > [ 26.900] (II) Loading /usr/X11R6/lib/modules/libfb.so > [ 26.900] (II) Module fb: vendor="X.Org Foundation" > [ 26.900] compiled for 1.19.6, module version = 1.0.0 > [ 26.900] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 26.900] (II) Loading sub module "dri2" > [ 26.900] (II) LoadModule: "dri2" > [ 26.900] (II) Module "dri2" already built-in > [ 26.900] (II) Loading sub module "glamoregl" > [ 26.900] (II) LoadModule: "glamoregl" > [ 26.901] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so > [ 26.901] (II) Module glamoregl: vendor="X.Org Foundation" > [ 26.901] compiled for 1.19.6, module version = 1.0.0 > [ 26.901] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 26.901] (II) glamor: OpenGL accelerated X.org driver based. > [ 26.906] (II) glamor: EGL version 1.4 (DRI2): > [ 26.906] EGL_MESA_drm_image required. > [ 26.907] (EE) RADEON(1): glamor detected, failed to initialize EGL. > [ 26.907] (II) Loading sub module "shadow" > [ 26.907] (II) LoadModule: "shadow" > [ 26.907] (II) Loading /usr/X11R6/lib/modules/libshadow.so > [ 26.907] (II) Module shadow: vendor="X.Org Foundation" > [ 26.907] compiled for 1.19.6, module version = 1.1.0 > [ 26.907] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 26.907] (II) RADEON(1): KMS Color Tiling: disabled > [ 26.907] (II) RADEON(1): KMS Color Tiling 2D: disabled > [ 26.907] (II) RADEON(1): KMS Pageflipping: enabled > [ 26.907] (II) RADEON(1): SwapBuffers wait for vsync: enabled > [ 26.970] (II) RADEON(1): Output DisplayPort-1 using monitor section > monitor1 > [ 27.005] (II) RADEON(1): EDID for output DisplayPort-1 > [ 27.005] (II) RADEON(1): Printing probed modes for output DisplayPort-1 > [ 27.005] (II) RADEON(1): Modeline "2560x1440"x60.0 241.50 2560 2608 > 2640 2720 1440 1443 1448 1481 +hsync -vsync (88.8 kHz UP) > [ 27.005] (II) RADEON(1): Modeline "1024x768"x60.0 65.00 1024 1048 1184 > 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) > [ 27.005] (II) RADEON(1): Modeline "800x600"x60.3 40.00 800 840 968 > 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) > [ 27.005] (II) RADEON(1): Modeline "800x600"x56.2 36.00 800 824 896 > 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) > [ 27.005] (II) RADEON(1): Modeline "848x480"x60.0 33.75 848 864 976 > 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) > [ 27.005] (II) RADEON(1): Modeline "640x480"x59.9 25.18 640 656 752 800 > 480 490 492 525 -hsync -vsync (31.5 kHz e) > [ 27.005] (II) RADEON(1): Output DisplayPort-1 connected > [ 27.005] (II) RADEON(1): Using user preference for initial modes > [ 27.005] (II) RADEON(1): Output DisplayPort-1 using initial mode > 2560x1440 +0+0 > [ 27.005] (II) RADEON(1): mem size init: gart size :1fbdf000 vram size: > s:80000000 visible:7fcc0000 > [ 27.005] (II) RADEON(1): EXA: Driver will allow EXA pixmaps in VRAM > [ 27.005] (==) RADEON(1): DPI set to (96, 96) > [ 27.005] (==) RADEON(1): Using gamma correction (1.0, 1.0, 1.0) > [ 27.005] (II) Loading sub module "ramdac" > [ 27.005] (II) LoadModule: "ramdac" > [ 27.005] (II) Module "ramdac" already built-in > [ 27.005] (--) Depth 24 pixmap format is 32 bpp > [ 27.006] (II) RADEON(0): Front buffer size: 14400K > [ 27.006] (II) RADEON(0): VRAM usage limit set to 1871467K > [ 27.007] (==) RADEON(0): DRI3 disabled > [ 27.007] (==) RADEON(0): Backing store enabled > [ 27.007] (WW) RADEON(0): Direct rendering disabled > [ 27.007] (II) RADEON(0): Acceleration disabled > [ 27.007] (==) RADEON(0): DPMS enabled > [ 27.007] (==) RADEON(0): Silken mouse enabled > [ 27.008] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR > disabled message. > [ 27.008] (--) RandR disabled > [ 27.009] (II) RADEON(1): Front buffer size: 14400K > [ 27.009] (II) RADEON(1): VRAM usage limit set to 1871467K > [ 27.009] (==) RADEON(1): DRI3 disabled > [ 27.009] (==) RADEON(1): Backing store enabled > [ 27.009] (WW) RADEON(1): Direct rendering disabled > [ 27.009] (II) RADEON(1): Acceleration disabled > [ 27.009] (==) RADEON(1): DPMS enabled > [ 27.009] (==) RADEON(1): Silken mouse enabled > [ 27.009] (II) RADEON(1): RandR 1.2 enabled, ignore the following RandR > disabled message. > [ 27.009] (--) RandR disabled > [ 27.016] (II) AIGLX: Screen 0 is not DRI2 capable > [ 27.016] (EE) AIGLX: reverting to software rendering > [ 27.020] (II) IGLX: enabled GLX_MESA_copy_sub_buffer > [ 27.020] (II) IGLX: Loaded and initialized swrast > [ 27.020] (II) GLX: Initialized DRISWRAST GL provider for screen 0 > [ 27.020] (II) AIGLX: Screen 1 is not DRI2 capable > [ 27.020] (EE) AIGLX: reverting to software rendering > [ 27.021] (II) IGLX: enabled GLX_MESA_copy_sub_buffer > [ 27.021] (II) IGLX: Loaded and initialized swrast > [ 27.021] (II) GLX: Initialized DRISWRAST GL provider for screen 1 > [ 27.217] (II) config/wscons: checking input device /dev/wskbd > [ 27.217] (II) wskbd: using layout se > [ 27.217] (II) LoadModule: "kbd" > [ 27.217] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so > [ 27.218] (II) Module kbd: vendor="X.Org Foundation" > [ 27.218] compiled for 1.19.6, module version = 1.9.0 > [ 27.218] Module class: X.Org XInput Driver > [ 27.218] ABI class: X.Org XInput driver, version 24.1 > [ 27.218] (II) Using input driver 'kbd' for '/dev/wskbd' > [ 27.218] (**) /dev/wskbd: always reports core events > [ 27.218] (**) /dev/wskbd: always reports core events > [ 27.218] (**) Option "Protocol" "standard" > [ 27.218] (**) Option "XkbRules" "base" > [ 27.218] (**) Option "XkbModel" "pc105" > [ 27.218] (**) Option "XkbLayout" "se" > [ 27.218] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: > KEYBOARD, id 6) > [ 27.430] (II) config/wscons: checking input device /dev/wsmouse > [ 27.430] (II) LoadModule: "ws" > [ 27.431] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so > [ 27.432] (II) Module ws: vendor="X.Org Foundation" > [ 27.432] compiled for 1.19.6, module version = 1.3.0 > [ 27.432] Module class: X.Org XInput Driver > [ 27.432] ABI class: X.Org XInput driver, version 24.1 > [ 27.432] (II) Using input driver 'ws' for '/dev/wsmouse' > [ 27.432] (**) /dev/wsmouse: always reports core events > [ 27.432] (II) ws: /dev/wsmouse: debuglevel 0 > [ 27.432] (**) Option "Device" "/dev/wsmouse" > [ 27.432] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 > [ 27.432] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 > [ 27.432] (**) ws: /dev/wsmouse: associated screen: 0 > [ 27.432] (II) ws: /dev/wsmouse: minimum x position: 0 > [ 27.432] (II) ws: /dev/wsmouse: maximum x position: 2559 > [ 27.432] (II) ws: /dev/wsmouse: minimum y position: 0 > [ 27.432] (II) ws: /dev/wsmouse: maximum y position: 1439 > [ 27.432] (==) ws: /dev/wsmouse: Buttons: 7 > [ 27.432] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 > [ 27.432] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: > MOUSE, id 7) > [ 27.432] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 > [ 27.432] (**) /dev/wsmouse: (accel) acceleration profile 0 > [ 27.432] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 > [ 27.432] (**) /dev/wsmouse: (accel) acceleration threshold: 4 > [ 27.433] (EE) Segmentation fault at address 0x64bfcd81018 > [ 27.433] (EE) > Fatal server error: > [ 27.433] (EE) Caught signal 11 (Segmentation fault). Server aborting > [ 27.433] (EE) > [ 27.433] (EE) > Please consult the The X.Org Foundation support > at http://wiki.x.org > for help. > [ 27.433] (EE) Please also check the log file at "/var/log/Xorg.0.log" for > additional information. > [ 27.433] (EE) > [ 27.433] (EE) ws: /dev/wsmouse: unknown command 4 > [ 27.441] (EE) Server terminated with error (1). Closing log file. >
