On 06/05/18 16:02, Stuart Longland wrote: > About 45 minutes later, I got a burst of errors from my cron job. > Pinging the border router yielded no reply, but I could still ping the > TS-7670. I think that confirms hardware. > > Disappointingly, I've not heard from PC Engines regarding the APU2 and > its power supply tolerance, but I've placed an order with Yawarra > Computers anyway, as it *looks* as if all the expensive bits that touch > 12V can take 24V+. > > If a 12V capacitor blows, well I have the schematics and a soldering > iron to replace that part. Plus, the old border router is still there > even if not the most reliable. > > When that arrives, I can look at getting OpenBSD 6.3 onto that, and > migrating my old config across.
Okay, I've moved the configuration over now to a shiny new APU2. Turns out there's a TVS diode which starts conducting at 14V, so I'm using a LM1085-12 on a small heatsink to drop the ~14V supply from the battery down to 12V for the APU2. Interestingly, the boot firmware in dmesg says "APU3" (invoice says APU2 though): > OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4261076992 (4063MB) > avail mem = 4124868608 (3933MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdffb7020 (7 entries) > bios0: vendor coreboot version "4.0.7" date 03/02/2017 > bios0: PC Engines APU3 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S2 S3 S4 S5 > acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET > acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) > UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4) > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD GX-412TC SOC, 998.26 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1 > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > acpitimer0: recalibrated TSC frequency 998010337 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD GX-412TC SOC, 998.14 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1 > cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: AMD GX-412TC SOC, 998.15 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1 > cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: AMD GX-412TC SOC, 998.14 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1 > cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins > ioapic1 at mainbus0: apid 5 pa 0xfec20000, version 21, 32 pins > , remapped to apid 5 > acpihpet0 at acpi0: 14318180 Hz > acpihpet0: recalibrated TSC frequency 998132695 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PBR4) > acpiprt2 at acpi0: bus 1 (PBR5) > acpiprt3 at acpi0: bus 2 (PBR6) > acpiprt4 at acpi0: bus 3 (PBR7) > acpiprt5 at acpi0: bus -1 (PBR8) > acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpibtn0 at acpi0: PWRB > cpu0: 998 MHz: speeds: 1000 800 600 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Root Complex" rev 0x00 > pchb1 at pci0 dev 2 function 0 "AMD AMD64 16h Host" rev 0x00 > ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi > pci1 at ppb0 bus 1 > em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address > 00:0d:b9:4a:f9:f8 > ppb1 at pci0 dev 2 function 3 "AMD AMD64 16h PCIE" rev 0x00: msi > pci2 at ppb1 bus 2 > em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address > 00:0d:b9:4a:f9:f9 > ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi > pci3 at ppb2 bus 3 > em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address > 00:0d:b9:4a:f9:fa > "AMD CCP" rev 0x00 at pci0 dev 8 function 0 not configured > xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x11: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 > addr 1 > ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: apic 4 int 19, > AHCI 1.3 > scsibus1 at ahci0: 32 targets > ehci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 > addr 1 > ehci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 > addr 1 > piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMBus > disabled > pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11 > sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int 16 > sdhc0: SDHC 2.0, 50 MHz base clock > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > pchb2 at pci0 dev 24 function 0 "AMD AMD64 16h Link Cfg" rev 0x00 > pchb3 at pci0 dev 24 function 1 "AMD AMD64 16h Address Map" rev 0x00 > pchb4 at pci0 dev 24 function 2 "AMD AMD64 16h DRAM Cfg" rev 0x00 > km0 at pci0 dev 24 function 3 "AMD AMD64 16h Misc Cfg" rev 0x00 > pchb5 at pci0 dev 24 function 4 "AMD AMD64 16h CPU Power" rev 0x00 > pchb6 at pci0 dev 24 function 5 "AMD AMD64 16h Misc Cfg" rev 0x00 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x52 > vmm0 at mainbus0: SVM/RVI > scsibus2 at sdmmc0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <SD/MMC, SM16G, 0080> SCSI2 0/direct removable > sd0: 15193MB, 512 bytes/sector, 31116288 sectors > uhub3 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro Devices > product 0x7900" rev 2.00/0.18 addr 2 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Advanced Micro Devices > product 0x7900" rev 2.00/0.18 addr 2 > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (f4a329560819ca6e.a) swap on sd0b dump on sd0b > Process (pid 1) got signal 31 > pppoe0: received unexpected PADO > pppoe0: received unexpected PADO > pppoe0: received unexpected PADO I have the same scripts set up on the APU2, so if I get the same shenanigans, I'll see them occurring and I'll be able to report those here. -- Stuart Longland (aka Redhatter, VK4MSL) I haven't lost my mind... ...it's backed up on a tape somewhere.
