Finally got around to recompiling again. Sorry for the noise between the two VM start attempts -- I suspended it to head to the office.
OpenBSD 6.3-current (GENERIC.MP) #1: Tue Jun 26 06:58:23 CDT 2018 a...@transient.attlocal.net:/mnt/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8227655680 (7846MB) avail mem = 7902162944 (7536MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9d90 (47 entries) bios0: vendor Acer version "V1.07" date 11/07/2011 bios0: Acer Aspire 5733Z acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT DMAR SSDT SSDT SSDT acpi0: wakeup devices AZAL(S3) P0P1(S4) EHC1(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) PEG5(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.97 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 2, package 0 cpu3 at mainbus0: apid 5 (application processor) cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 2, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins , remapped to apid 2 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P2) acpiprt2 at acpi0: bus 3 (P0P1) acpiprt3 at acpi0: bus 1 (RP01) acpiprt4 at acpi0: bus 2 (RP02) acpiprt5 at acpi0: bus -1 (RP03) acpiprt6 at acpi0: bus -1 (RP04) acpiprt7 at acpi0: bus -1 (RP05) acpiprt8 at acpi0: bus -1 (RP06) acpiprt9 at acpi0: bus -1 (RP07) acpiprt10 at acpi0: bus -1 (RP08) acpiprt11 at acpi0: bus -1 (PEG5) acpiec0 at acpi0 acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS "pnp0c14" at acpi0 not configured acpibat0 at acpi0: BAT0 model "Li_Ion_4000mA " serial 78da type Lion oem "SANYO " acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpicmos0 at acpi0 "ETD0500" at acpi0 not configured "PNP0C14" at acpi0 not configured "PNP0C14" at acpi0 not configured acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD03 acpivideo1 at acpi0: VGA_ cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2533, 2399, 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0: msi inteldrm0: 1366x768, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: msi azalia0: codecs: Realtek ALC272 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi pci1 at ppb0 bus 1 bge0 at pci1 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 (0x57780001): msi, address dc:0e:a1:91:7a:b9 brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1 ppb1 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x05: msi pci2 at ppb1 bus 2 athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17 athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 00:25:d3:f4:f8:4b ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5 pci3 at ppb2 bus 3 pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x05 ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI 1.3 ahci0: port 0: 3.0Gb/s ahci0: port 1: 1.5Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDA12, Z320> SCSI3 0/direct fixed naa.5001b444a668bf8d sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, CDRW/DVD GCCT20N, A108> ATAPI 5/cdrom removable ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 2 int 19 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pms0: Elantech Touchpad, version 2, firmware 0x40213 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 pci4 at mainbus0 bus 255 pchb1 at pci4 dev 0 function 0 "Intel QuickPath" rev 0x02 pchb2 at pci4 dev 0 function 1 "Intel QuickPath" rev 0x02 pchb3 at pci4 dev 2 function 0 "Intel QPI Link" rev 0x02 pchb4 at pci4 dev 2 function 1 "Intel QPI Physical" rev 0x02 pchb5 at pci4 dev 2 function 2 "Intel Reserved" rev 0x02 pchb6 at pci4 dev 2 function 3 "Intel Reserved" rev 0x02 vmm0 at mainbus0: VMX/EPT uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD WebCam" rev 2.00/1.02 addr 3 video0 at uvideo0 umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/38.82 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct removable serial.0bda0138516388200000 uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on sd0a (7c4cada893c18112.a) swap on sd0b dump on sd0b lock order reversal: 1st 0xffffff01fa00eb58 vmmaplk (&map->lock) @ /mnt/src/sys/uvm/uvm_fault.c:1441 2nd 0xffff80000015c138 drmdevlk (&dev->struct_mutex) @ /mnt/src/sys/dev/pci/drm/i915/i915_gem.c:1801 lock order "&dev->struct_mutex"(rwlock) -> "&map->lock"(rwlock) first seen at: #0 witness_checkorder+0x4c0 #1 _rw_enter+0x68 #2 vm_map_lock_ln+0xbc #3 uvm_map+0x1a1 #4 km_alloc+0x16a #5 bus_space_map+0x159 #6 i965_alloc_ifp+0xc1 #7 intel_gtt_chipset_setup+0x1b1 #8 intel_enable_gtt+0x26 #9 i915_gem_init_hw+0x43 #10 i915_gem_init+0x24e #11 i915_driver_load+0xfc1 #12 inteldrm_attach+0x37f #13 config_attach+0x20e #14 pci_probe_device+0x501 #15 pci_enumerate_bus+0xb7 #16 config_attach+0x20e #17 mainbus_attach+0x24a #18 config_attach+0x20e lock order "&map->lock"(rwlock) -> "&dev->struct_mutex"(rwlock) first seen at: #0 witness_checkorder+0x4c0 #1 _rw_enter_write+0x53 #2 i915_gem_object_wait_rendering__nonblocking+0x1fa #3 i915_gem_fault+0x144 #4 drm_fault+0x18a #5 uvm_fault+0x743 #6 pageflttrap+0x14c #7 trap+0x2b6 #8 recall_trap+0x8 vm_impl_init_vmx: created vm_map @ 0xffff800000d18000 vm_resetcpu: resetting vm 1 vcpu 0 to power on defaults Guest EPTP = 0x1f95bd01e vmm_alloc_vpid: allocated VPID/ASID 1 vmm_fpurestore: guest attempted to set invalid bits in xcr0 vmm_free_vpid: freed VPID/ASID 1 lock order reversal: 1st 0xffff800000021668 acpilk (&sc->sc_lck) @ /mnt/src/sys/dev/acpi/acpi.c:2508 2nd 0xffff80000015c278 mcrwl (&dev->mode_config.mutex) @ /mnt/src/sys/dev/pci/drm/drm_modeset_lock.c:76 lock order "&dev->mode_config.mutex"(rwlock) -> "&sc->sc_lck"(rwlock) first seen at: #0 witness_checkorder+0x4c0 #1 _rw_enter_write+0x53 #2 acpivout_get_param+0xc8 #3 inteldrm_backlight_get_brightness+0x39 #4 get_properties+0x166 #5 drm_mode_getconnector+0x33b #6 drm_do_ioctl+0x221 #7 drmioctl+0xf9 #8 VOP_IOCTL+0x5a #9 vn_ioctl+0x6b #10 sys_ioctl+0x477 #11 syscall+0x32a #12 Xsyscall_untramp+0xe4 video0 detached uvideo0 detached sd1 detached scsibus2 detached umass0 detached uhub2 detached uhub0 detached uhub3 detached uhub1 detached uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD WebCam" rev 2.00/1.02 addr 3 video0 at uvideo0 umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/38.82 addr 4 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct removable serial.0bda0138516388200000 uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 vm_impl_init_vmx: created vm_map @ 0xffff800000d3aa00 vm_resetcpu: resetting vm 2 vcpu 0 to power on defaults Guest EPTP = 0x1f95bb01e vmm_alloc_vpid: allocated VPID/ASID 1 vmm_fpurestore: guest attempted to set invalid bits in xcr0 vmm_free_vpid: freed VPID/ASID 1 On Sun, Jun 24, 2018 at 2:33 PM, Mike Larkin <mlar...@azathoth.net> wrote: > On Sun, Jun 24, 2018 at 01:41:47AM -0500, Ax0n wrote: > > On Sat, Jun 23, 2018 at 3:54 PM, Ax0n <a...@h-i-r.net> wrote: > > > > > > > > FWIW, that patch didn't apply cleanly to a fresh pull of the tree from > > > GitHub. I know it's not OFFICIALLY -CURRENT for realsies but it's what > I > > > have been using on this laptop for months. It sounds like it was > probably > > > patched against -STABLE? I didn't read the entire thread on bugs@. I > have > > > tried with 3 daily snapshots in a row and I'm having the same problem. > I > > > haven't actually fired up vmm in a few weeks, so I'm not sure exactly > when > > > it quit working. I'm re-building with VMM_DEBUG first. > > > > > > Mike, I'll send all relevant info (dmesg, vmd -dvvv, vm.conf) to bugs@ > > > once I have it, unless this sounds like an ongoing thing you probably > have > > > on your radar already. I'm not in a huge rush, so I can wait a bit if > you > > > think you have something that'll make it into -CURRENT in a while. > > > > > > > Following up and cc bugs@ I built the system with VMM_DEBUG enabled. > > > > This does not look like the output from a kernel with VMM_DEBUG enabled. > You'll > be seeing all sorts of debug output to dmesg as the VM starts, runs, and > ultimately in your case aborts. > > -ml > > > >Synopsis: vmm(4) VMs fail to start: ioctl failed: Invalid argument > > >Category: amd64 > > >Environment: > > System : OpenBSD 6.3 > > Details : OpenBSD 6.3-current (GENERIC.MP) #49: Sat Jun 23 > > 09:32:05 MDT 2018 > > dera...@amd64.openbsd.org: > > /usr/src/sys/arch/amd64/compile/GENERIC.MP > > > > Architecture: OpenBSD.amd64 > > Machine : amd64 > > >Description: > > VMs fail to boot. > > [axon@transient ~]$ doas vmd -dvvv > > startup > > /etc/vm.conf:4: switch "local" registered > > /etc/vm.conf:8: switch "internal" registered > > /etc/vm.conf:12: switch "wired" registered > > vm_register: registering vm 1 > > /etc/vm.conf:28: vm "OBSD-Stable.vm" registered (disabled) > > vm_register: registering vm 2 > > /etc/vm.conf:41: vm "OBSD-Stable-alt.vm" registered (disabled) > > vm_register: registering vm 3 > > /etc/vm.conf:53: vm "OBSDSnap64.vm" registered (disabled) > > config_setconfig: setting config > > vm_priv_brconfig: interface bridge0 description switch1-local > > vm_priv_brconfig: interface bridge1 description switch2-internal > > vm_priv_brconfig: interface bridge0 description switch3-wired > > vmd_configure: not creating vm OBSD-Stable.vm (disabled) > > vmd_configure: not creating vm OBSD-Stable-alt.vm (disabled) > > vmd_configure: not creating vm OBSDSnap64.vm (disabled) > > config_getconfig: priv retrieving config > > config_getconfig: control retrieving config > > config_getconfig: vmm retrieving config > > vm_opentty: vm OBSDSnap64.vm tty /dev/ttyp3 uid 1000 gid 4 mode 620 > > vm_register: registering vm 3 > > vm_priv_ifconfig: interface tap0 description vm3-if0-OBSDSnap64.vm > > vm_priv_ifconfig: switch "local" interface bridge0 add tap0 > > OBSDSnap64.vm: started vm 3 successfully, tty /dev/ttyp3 > > loadfile_bios: loaded BIOS image > > run_vm: initializing hardware for vm OBSDSnap64.vm > > pic_set_elcr: setting level triggered mode for irq 3 > > pic_set_elcr: setting level triggered mode for irq 5 > > pic_set_elcr: setting level triggered mode for irq 6 > > virtio_init: vm "OBSDSnap64.vm" vio0 lladdr fe:e1:ba:d0:eb:ac > > pic_set_elcr: setting level triggered mode for irq 7 > > run_vm: starting vcpu threads for vm OBSDSnap64.vm > > vcpu_reset: resetting vcpu 0 for vm 2 > > run_vm: waiting on events for VM OBSDSnap64.vm > > vcpu_run_loop: vm 2 / vcpu 0 run ioctl failed: Invalid argument > > vmm_sighdlr: handling signal 20 > > vmm_sighdlr: attempting to terminate vm 3 > > terminate_vm: terminating vmid 2 > > vmm_sighdlr: calling vm_remove > > vm_remove: removing vm id 3 from running config > > vm_remove: calling vm_stop > > vm_stop: stopping vm 3 > > vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 3 ret 22 > > vmd_dispatch_vmm: about to stop vm id 3 > > vm_stop: stopping vm 3 > > vm_opentty: vm OBSDSnap64.vm tty /dev/ttyp4 uid 1000 gid 4 mode 620 > > vm_register: registering vm 3 > > vm_priv_ifconfig: interface tap0 description vm3-if0-OBSDSnap64.vm > > vm_priv_ifconfig: switch "local" interface bridge0 add tap0 > > OBSDSnap64.vm: started vm 3 successfully, tty /dev/ttyp4 > > loadfile_bios: loaded BIOS image > > run_vm: initializing hardware for vm OBSDSnap64.vm > > pic_set_elcr: setting level triggered mode for irq 3 > > pic_set_elcr: setting level triggered mode for irq 5 > > pic_set_elcr: setting level triggered mode for irq 6 > > virtio_init: vm "OBSDSnap64.vm" vio0 lladdr fe:e1:ba:d0:eb:ac > > pic_set_elcr: setting level triggered mode for irq 7 > > run_vm: starting vcpu threads for vm OBSDSnap64.vm > > vcpu_reset: resetting vcpu 0 for vm 3 > > run_vm: waiting on events for VM OBSDSnap64.vm > > vcpu_run_loop: vm 3 / vcpu 0 run ioctl failed: Invalid argument > > vmm_sighdlr: handling signal 20 > > vmm_sighdlr: attempting to terminate vm 3 > > terminate_vm: terminating vmid 3 > > vmm_sighdlr: calling vm_remove > > vm_remove: removing vm id 3 from running config > > vm_remove: calling vm_stop > > vm_stop: stopping vm 3 > > vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 3 ret 22 > > vmd_dispatch_vmm: about to stop vm id 3 > > vm_stop: stopping vm 3 > > > > ############################ > > Contents of vm.conf: > > ############################ > > switch "local" { > > interface bridge0 > > } > > > > switch "internal" { > > interface bridge1 > > } > > > > switch "wired" { > > interface bridge0 > > } > > > > # OpenBSD Stable > > vm "OBSD-Stable.vm" { > > disable > > owner axon > > memory 512M > > disk "/home/axon/vmm/obsd-stable.img" > > interface { > > switch "local" > > lladdr fe:e1:ba:d0:eb:ab > > } > > # interface { > > # switch "local" > > # lladdr fe:e1:ba:d0:eb:0b > > # } > > } > > > > > > # OpenBSD Stable alternate > > vm "OBSD-Stable-alt.vm" { > > disable > > owner axon > > memory 256M > > disk "/home/axon/vmm/obsd-stable-alt.img" > > interface { > > switch "local" > > lladdr fe:e1:ba:d0:eb:ad > > } > > } > > > > # OpenBSD amd64 Snapshot > > vm "OBSDSnap64.vm" { > > disable > > owner axon > > memory 256M > > disk "/home/axon/vmm/obsd-snap64.img" > > interface { > > switch "local" > > lladdr fe:e1:ba:d0:eb:ac > > } > > } > > > > > > >How-To-Repeat: > > On this system (Acer Aspire 5733Z with upgrades), any attempt to > > start a vm as a user or root will fail. > > > > >Fix: > > N/A > > > > dmesg: > > OpenBSD 6.3-current (GENERIC.MP) #49: Sat Jun 23 09:32:05 MDT 2018 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 8227655680 (7846MB) > > avail mem = 7902208000 (7536MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9d90 (47 entries) > > bios0: vendor Acer version "V1.07" date 11/07/2011 > > bios0: Acer Aspire 5733Z > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S3 S4 S5 > > acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT DMAR SSDT SSDT > > SSDT > > acpi0: wakeup devices AZAL(S3) P0P1(S4) EHC1(S3) USB1(S3) USB2(S3) > USB3(S3) > > USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) PEG5(S4) > > acpitimer0 at acpi0: 3579545 Hz, 24 bits > > acpihpet0 at acpi0: 14318179 Hz > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.85 MHz > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP, > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN > > cpu0: 256KB 64b/line 8-way L2 cache > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > > cpu0: apic clock running at 133MHz > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP, > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN > > cpu1: 256KB 64b/line 8-way L2 cache > > cpu1: smt 1, core 0, package 0 > > cpu2 at mainbus0: apid 4 (application processor) > > cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP, > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN > > cpu2: 256KB 64b/line 8-way L2 cache > > cpu2: smt 0, core 2, package 0 > > cpu3 at mainbus0: apid 5 (application processor) > > cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM, > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3, > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP, > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN > > cpu3: 256KB 64b/line 8-way L2 cache > > cpu3: smt 1, core 2, package 0 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > , remapped to apid 2 > > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus -1 (P0P2) > > acpiprt2 at acpi0: bus 3 (P0P1) > > acpiprt3 at acpi0: bus 1 (RP01) > > acpiprt4 at acpi0: bus 2 (RP02) > > acpiprt5 at acpi0: bus -1 (RP03) > > acpiprt6 at acpi0: bus -1 (RP04) > > acpiprt7 at acpi0: bus -1 (RP05) > > acpiprt8 at acpi0: bus -1 (RP06) > > acpiprt9 at acpi0: bus -1 (RP07) > > acpiprt10 at acpi0: bus -1 (RP08) > > acpiprt11 at acpi0: bus -1 (PEG5) > > acpiec0 at acpi0 > > acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS > > acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS > > acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS > > acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS > > "pnp0c14" at acpi0 not configured > > acpibat0 at acpi0: BAT0 model "Li_Ion_4000mA " serial 78da type Lion oem > > "SANYO " > > acpiac0 at acpi0: AC unit online > > acpibtn0 at acpi0: PWRB > > acpibtn1 at acpi0: LID0 > > acpibtn2 at acpi0: SLPB > > acpicmos0 at acpi0 > > "ETD0500" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > "PNP0C14" at acpi0 not configured > > acpivideo0 at acpi0: GFX0 > > acpivout0 at acpivideo0: DD03 > > acpivideo1 at acpi0: VGA_ > > cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2533, 2399, 2266, 2133, 1999, > > 1866, 1733, 1599, 1466, 1333, 1199 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02 > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02 > > drm0 at inteldrm0 > > intagp0 at inteldrm0 > > agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 > > inteldrm0: msi > > inteldrm0: 1366x768, 32bpp > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > > wsdisplay0: screen 1-5 added (std, vt100 emulation) > > "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured > > ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 16 > > usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: msi > > azalia0: codecs: Realtek ALC272 > > audio0 at azalia0 > > ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi > > pci1 at ppb0 bus 1 > > bge0 at pci1 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 > > (0x57780001): msi, address dc:0e:a1:91:7a:b9 > > brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1 > > ppb1 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x05: msi > > pci2 at ppb1 bus 2 > > athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17 > > athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 00:25:d3:f4:f8:4b > > ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 23 > > usb1 at ehci1: USB revision 2.0 > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > > 2.00/1.00 addr 1 > > ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5 > > pci3 at ppb2 bus 3 > > pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x05 > > ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI 1.3 > > ahci0: port 0: 3.0Gb/s > > ahci0: port 1: 1.5Gb/s > > scsibus1 at ahci0: 32 targets > > sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDA12, Z320> SCSI3 > 0/direct > > fixed naa.5001b444a668bf8d > > sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin > > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, CDRW/DVD GCCT20N, A108> ATAPI > > 5/cdrom removable > > ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 2 > int 19 > > iic0 at ichiic0 > > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM > > itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05 > > isa0 at pcib0 > > isadma0 at isa0 > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > > pckbd0 at pckbc0 (kbd slot) > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pms0 at pckbc0 (aux slot) > > wsmouse0 at pms0 mux 0 > > pms0: Elantech Touchpad, version 2, firmware 0x40213 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > pci4 at mainbus0 bus 255 > > pchb1 at pci4 dev 0 function 0 "Intel QuickPath" rev 0x02 > > pchb2 at pci4 dev 0 function 1 "Intel QuickPath" rev 0x02 > > pchb3 at pci4 dev 2 function 0 "Intel QPI Link" rev 0x02 > > pchb4 at pci4 dev 2 function 1 "Intel QPI Physical" rev 0x02 > > pchb5 at pci4 dev 2 function 2 "Intel Reserved" rev 0x02 > > pchb6 at pci4 dev 2 function 3 "Intel Reserved" rev 0x02 > > vmm0 at mainbus0: VMX/EPT > > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching > Hub" > > rev 2.00/0.00 addr 2 > > uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD > WebCam" > > rev 2.00/1.02 addr 3 > > video0 at uvideo0 > > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB2.0-CRW" > rev > > 2.00/38.82 addr 4 > > umass0: using SCSI over Bulk-Only > > scsibus2 at umass0: 2 targets, initiator 0 > > sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct > > removable serial.0bda0138516388200000 > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > Hub" > > rev 2.00/0.00 addr 2 > > vscsi0 at root > > scsibus3 at vscsi0: 256 targets > > softraid0 at root > > scsibus4 at softraid0: 256 targets > > root on sd0a (7c4cada893c18112.a) swap on sd0b dump on sd0b > > lock order reversal: > > 1st 0xffffff01f7778888 vmmaplk (&map->lock) @ > > /usr/src/sys/uvm/uvm_fault.c:1441 > > 2nd 0xffff80000015c138 drmdevlk (&dev->struct_mutex) @ > > /usr/src/sys/dev/pci/drm/i915/i915_gem.c:1801 > > lock order "&dev->struct_mutex"(rwlock) -> "&map->lock"(rwlock) first > seen > > at: > > #0 witness_checkorder+0x4c0 > > #1 _rw_enter+0x68 > > #2 vm_map_lock_ln+0xbc > > #3 uvm_map+0x1a1 > > #4 km_alloc+0x16a > > #5 bus_space_map+0x159 > > #6 i965_alloc_ifp+0xc1 > > #7 intel_gtt_chipset_setup+0x1b1 > > #8 intel_enable_gtt+0x26 > > #9 i915_gem_init_hw+0x43 > > #10 i915_gem_init+0x24e > > #11 i915_driver_load+0xfc1 > > #12 inteldrm_attach+0x37f > > #13 config_attach+0x20e > > #14 pci_probe_device+0x501 > > #15 pci_enumerate_bus+0xb7 > > #16 config_attach+0x20e > > #17 mainbus_attach+0x24a > > #18 config_attach+0x20e > > lock order "&map->lock"(rwlock) -> "&dev->struct_mutex"(rwlock) first > seen > > at: > > #0 witness_checkorder+0x4c0 > > #1 _rw_enter_write+0x53 > > #2 i915_gem_object_wait_rendering__nonblocking+0x1fa > > #3 i915_gem_fault+0x144 > > #4 drm_fault+0x18a > > #5 uvm_fault+0x743 > > #6 pageflttrap+0x14c > > #7 trap+0x2b2 > > #8 recall_trap+0x8 > > > > usbdevs: > > Controller /dev/usb0: > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > > Intel(0x8086), rev 1.00 > > port 1 addr 2: high speed, self powered, config 1, Rate Matching > > Hub(0x0020), Intel(0x8087), rev 0.00 > > port 1 addr 3: high speed, power 500 mA, config 1, 1.3M HD > > WebCam(0xd250), SuYin(0x064e), rev 1.02, iSerialNumber > > HF1316-A821-HN01-VA-R01.00.02 > > port 2 addr 4: high speed, power 500 mA, config 1, USB2.0-CRW(0x0138), > > Generic(0x0bda), rev 38.82, iSerialNumber 20090516388200000 > > port 3 powered > > port 4 powered > > port 5 powered > > port 6 powered > > port 2 powered > > Controller /dev/usb1: > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > > Intel(0x8086), rev 1.00 > > port 1 addr 2: high speed, self powered, config 1, Rate Matching > > Hub(0x0020), Intel(0x8087), rev 0.00 > > port 1 powered > > port 2 powered > > port 3 powered > > port 4 powered > > port 5 powered > > port 6 powered > > port 7 powered > > port 8 powered > > port 2 powered >