I don't have another box to run these on, but with Hexdump, it looks like
these two particular VMs are:
OpenBSD 6.1-current (GENERIC) #54: Fri Apr 14 13:51:22 MDT 2017
OpenBSD 6.3 (GENERIC) #1: Sat Apr 21 13:49:17 CEST 2018
Neither one boots.
On Wed, Jun 27, 2018 at 12:58 AM, Mike Larkin <mlar...@azathoth.net> wrote:
> On Tue, Jun 26, 2018 at 08:22:08AM -0500, Ax0n wrote:
> > Finally got around to recompiling again. Sorry for the noise between the
> > two VM start attempts -- I suspended it to head to the office.
> >
> > OpenBSD 6.3-current (GENERIC.MP) #1: Tue Jun 26 06:58:23 CDT 2018
> > a...@transient.attlocal.net:/mnt/src/sys/arch/amd64/compile/
> GENERIC.MP
> > real mem = 8227655680 (7846MB)
> > avail mem = 7902162944 (7536MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9d90 (47 entries)
> > bios0: vendor Acer version "V1.07" date 11/07/2011
> > bios0: Acer Aspire 5733Z
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT DMAR SSDT SSDT
> > SSDT
> > acpi0: wakeup devices AZAL(S3) P0P1(S4) EHC1(S3) USB1(S3) USB2(S3)
> USB3(S3)
> > USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) PEG5(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpihpet0 at acpi0: 14318179 Hz
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.97 MHz
> > cpu0:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > cpu0: 256KB 64b/line 8-way L2 cache
> > cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 133MHz
> > cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz
> > cpu1:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > cpu1: 256KB 64b/line 8-way L2 cache
> > cpu1: smt 1, core 0, package 0
> > cpu2 at mainbus0: apid 4 (application processor)
> > cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz
> > cpu2:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > cpu2: 256KB 64b/line 8-way L2 cache
> > cpu2: smt 0, core 2, package 0
> > cpu3 at mainbus0: apid 5 (application processor)
> > cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz
> > cpu3:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > cpu3: 256KB 64b/line 8-way L2 cache
> > cpu3: smt 1, core 2, package 0
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > , remapped to apid 2
> > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus -1 (P0P2)
> > acpiprt2 at acpi0: bus 3 (P0P1)
> > acpiprt3 at acpi0: bus 1 (RP01)
> > acpiprt4 at acpi0: bus 2 (RP02)
> > acpiprt5 at acpi0: bus -1 (RP03)
> > acpiprt6 at acpi0: bus -1 (RP04)
> > acpiprt7 at acpi0: bus -1 (RP05)
> > acpiprt8 at acpi0: bus -1 (RP06)
> > acpiprt9 at acpi0: bus -1 (RP07)
> > acpiprt10 at acpi0: bus -1 (RP08)
> > acpiprt11 at acpi0: bus -1 (PEG5)
> > acpiec0 at acpi0
> > acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > "pnp0c14" at acpi0 not configured
> > acpibat0 at acpi0: BAT0 model "Li_Ion_4000mA " serial 78da type Lion oem
> > "SANYO "
> > acpiac0 at acpi0: AC unit online
> > acpibtn0 at acpi0: PWRB
> > acpibtn1 at acpi0: LID0
> > acpibtn2 at acpi0: SLPB
> > acpicmos0 at acpi0
> > "ETD0500" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > acpivideo0 at acpi0: GFX0
> > acpivout0 at acpivideo0: DD03
> > acpivideo1 at acpi0: VGA_
> > cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2533, 2399, 2266, 2133, 1999,
> > 1866, 1733, 1599, 1466, 1333, 1199 MHz
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
> > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02
> > drm0 at inteldrm0
> > intagp0 at inteldrm0
> > agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
> > inteldrm0: msi
> > inteldrm0: 1366x768, 32bpp
> > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
> > ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 16
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: msi
> > azalia0: codecs: Realtek ALC272
> > audio0 at azalia0
> > ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
> > pci1 at ppb0 bus 1
> > bge0 at pci1 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1
> > (0x57780001): msi, address dc:0e:a1:91:7a:b9
> > brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
> > ppb1 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x05: msi
> > pci2 at ppb1 bus 2
> > athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17
> > athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 00:25:d3:f4:f8:4b
> > ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 23
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5
> > pci3 at ppb2 bus 3
> > pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x05
> > ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI 1.3
> > ahci0: port 0: 3.0Gb/s
> > ahci0: port 1: 1.5Gb/s
> > scsibus1 at ahci0: 32 targets
> > sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDA12, Z320> SCSI3
> 0/direct
> > fixed naa.5001b444a668bf8d
> > sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
> > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, CDRW/DVD GCCT20N, A108> ATAPI
> > 5/cdrom removable
> > ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 2
> int 19
> > iic0 at ichiic0
> > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> > spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> > itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > wsmouse0 at pms0 mux 0
> > pms0: Elantech Touchpad, version 2, firmware 0x40213
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > pci4 at mainbus0 bus 255
> > pchb1 at pci4 dev 0 function 0 "Intel QuickPath" rev 0x02
> > pchb2 at pci4 dev 0 function 1 "Intel QuickPath" rev 0x02
> > pchb3 at pci4 dev 2 function 0 "Intel QPI Link" rev 0x02
> > pchb4 at pci4 dev 2 function 1 "Intel QPI Physical" rev 0x02
> > pchb5 at pci4 dev 2 function 2 "Intel Reserved" rev 0x02
> > pchb6 at pci4 dev 2 function 3 "Intel Reserved" rev 0x02
> > vmm0 at mainbus0: VMX/EPT
> > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub"
> > rev 2.00/0.00 addr 2
> > uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD
> WebCam"
> > rev 2.00/1.02 addr 3
> > video0 at uvideo0
> > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB2.0-CRW"
> rev
> > 2.00/38.82 addr 4
> > umass0: using SCSI over Bulk-Only
> > scsibus2 at umass0: 2 targets, initiator 0
> > sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
> > removable serial.0bda0138516388200000
> > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub"
> > rev 2.00/0.00 addr 2
> > vscsi0 at root
> > scsibus3 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus4 at softraid0: 256 targets
> > root on sd0a (7c4cada893c18112.a) swap on sd0b dump on sd0b
> > lock order reversal:
> > 1st 0xffffff01fa00eb58 vmmaplk (&map->lock) @
> > /mnt/src/sys/uvm/uvm_fault.c:1441
> > 2nd 0xffff80000015c138 drmdevlk (&dev->struct_mutex) @
> > /mnt/src/sys/dev/pci/drm/i915/i915_gem.c:1801
> > lock order "&dev->struct_mutex"(rwlock) -> "&map->lock"(rwlock) first
> seen
> > at:
> > #0 witness_checkorder+0x4c0
> > #1 _rw_enter+0x68
> > #2 vm_map_lock_ln+0xbc
> > #3 uvm_map+0x1a1
> > #4 km_alloc+0x16a
> > #5 bus_space_map+0x159
> > #6 i965_alloc_ifp+0xc1
> > #7 intel_gtt_chipset_setup+0x1b1
> > #8 intel_enable_gtt+0x26
> > #9 i915_gem_init_hw+0x43
> > #10 i915_gem_init+0x24e
> > #11 i915_driver_load+0xfc1
> > #12 inteldrm_attach+0x37f
> > #13 config_attach+0x20e
> > #14 pci_probe_device+0x501
> > #15 pci_enumerate_bus+0xb7
> > #16 config_attach+0x20e
> > #17 mainbus_attach+0x24a
> > #18 config_attach+0x20e
> > lock order "&map->lock"(rwlock) -> "&dev->struct_mutex"(rwlock) first
> seen
> > at:
> > #0 witness_checkorder+0x4c0
> > #1 _rw_enter_write+0x53
> > #2 i915_gem_object_wait_rendering__nonblocking+0x1fa
> > #3 i915_gem_fault+0x144
> > #4 drm_fault+0x18a
> > #5 uvm_fault+0x743
> > #6 pageflttrap+0x14c
> > #7 trap+0x2b6
> > #8 recall_trap+0x8
> > vm_impl_init_vmx: created vm_map @ 0xffff800000d18000
> > vm_resetcpu: resetting vm 1 vcpu 0 to power on defaults
> > Guest EPTP = 0x1f95bd01e
> > vmm_alloc_vpid: allocated VPID/ASID 1
> > vmm_fpurestore: guest attempted to set invalid bits in xcr0
> > vmm_free_vpid: freed VPID/ASID 1
> > lock order reversal:
> > 1st 0xffff800000021668 acpilk (&sc->sc_lck) @
> > /mnt/src/sys/dev/acpi/acpi.c:2508
> > 2nd 0xffff80000015c278 mcrwl (&dev->mode_config.mutex) @
> > /mnt/src/sys/dev/pci/drm/drm_modeset_lock.c:76
> > lock order "&dev->mode_config.mutex"(rwlock) -> "&sc->sc_lck"(rwlock)
> first
> > seen at:
> > #0 witness_checkorder+0x4c0
> > #1 _rw_enter_write+0x53
> > #2 acpivout_get_param+0xc8
> > #3 inteldrm_backlight_get_brightness+0x39
> > #4 get_properties+0x166
> > #5 drm_mode_getconnector+0x33b
> > #6 drm_do_ioctl+0x221
> > #7 drmioctl+0xf9
> > #8 VOP_IOCTL+0x5a
> > #9 vn_ioctl+0x6b
> > #10 sys_ioctl+0x477
> > #11 syscall+0x32a
> > #12 Xsyscall_untramp+0xe4
> > video0 detached
> > uvideo0 detached
> > sd1 detached
> > scsibus2 detached
> > umass0 detached
> > uhub2 detached
> > uhub0 detached
> > uhub3 detached
> > uhub1 detached
> > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub"
> > rev 2.00/0.00 addr 2
> > uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD
> WebCam"
> > rev 2.00/1.02 addr 3
> > video0 at uvideo0
> > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB2.0-CRW"
> rev
> > 2.00/38.82 addr 4
> > umass0: using SCSI over Bulk-Only
> > scsibus2 at umass0: 2 targets, initiator 0
> > sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
> > removable serial.0bda0138516388200000
> > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub"
> > rev 2.00/0.00 addr 2
> > vm_impl_init_vmx: created vm_map @ 0xffff800000d3aa00
> > vm_resetcpu: resetting vm 2 vcpu 0 to power on defaults
> > Guest EPTP = 0x1f95bb01e
> > vmm_alloc_vpid: allocated VPID/ASID 1
> > vmm_fpurestore: guest attempted to set invalid bits in xcr0
>
> That's the problem.
>
> What's the guest VM you're trying to boot here? If it's OpenBSD, can
> you give the build date and version?
>
> Thanks.
>
> -ml
>
>
> > vmm_free_vpid: freed VPID/ASID 1
> >
> >
> >
> >
> >
> > On Sun, Jun 24, 2018 at 2:33 PM, Mike Larkin <mlar...@azathoth.net>
> wrote:
> >
> > > On Sun, Jun 24, 2018 at 01:41:47AM -0500, Ax0n wrote:
> > > > On Sat, Jun 23, 2018 at 3:54 PM, Ax0n <a...@h-i-r.net> wrote:
> > > >
> > > > >
> > > > > FWIW, that patch didn't apply cleanly to a fresh pull of the tree
> from
> > > > > GitHub. I know it's not OFFICIALLY -CURRENT for realsies but it's
> what
> > > I
> > > > > have been using on this laptop for months. It sounds like it was
> > > probably
> > > > > patched against -STABLE? I didn't read the entire thread on bugs@.
> I
> > > have
> > > > > tried with 3 daily snapshots in a row and I'm having the same
> problem.
> > > I
> > > > > haven't actually fired up vmm in a few weeks, so I'm not sure
> exactly
> > > when
> > > > > it quit working. I'm re-building with VMM_DEBUG first.
> > > > >
> > > > > Mike, I'll send all relevant info (dmesg, vmd -dvvv, vm.conf) to
> bugs@
> > > > > once I have it, unless this sounds like an ongoing thing you
> probably
> > > have
> > > > > on your radar already. I'm not in a huge rush, so I can wait a bit
> if
> > > you
> > > > > think you have something that'll make it into -CURRENT in a while.
> > > > >
> > > >
> > > > Following up and cc bugs@ I built the system with VMM_DEBUG enabled.
> > > >
> > >
> > > This does not look like the output from a kernel with VMM_DEBUG
> enabled.
> > > You'll
> > > be seeing all sorts of debug output to dmesg as the VM starts, runs,
> and
> > > ultimately in your case aborts.
> > >
> > > -ml
> > >
> > > > >Synopsis: vmm(4) VMs fail to start: ioctl failed: Invalid
> argument
> > > > >Category: amd64
> > > > >Environment:
> > > > System : OpenBSD 6.3
> > > > Details : OpenBSD 6.3-current (GENERIC.MP) #49: Sat Jun
> 23
> > > > 09:32:05 MDT 2018
> > > > dera...@amd64.openbsd.org:
> > > > /usr/src/sys/arch/amd64/compile/GENERIC.MP
> > > >
> > > > Architecture: OpenBSD.amd64
> > > > Machine : amd64
> > > > >Description:
> > > > VMs fail to boot.
> > > > [axon@transient ~]$ doas vmd -dvvv
> > > > startup
> > > > /etc/vm.conf:4: switch "local" registered
> > > > /etc/vm.conf:8: switch "internal" registered
> > > > /etc/vm.conf:12: switch "wired" registered
> > > > vm_register: registering vm 1
> > > > /etc/vm.conf:28: vm "OBSD-Stable.vm" registered (disabled)
> > > > vm_register: registering vm 2
> > > > /etc/vm.conf:41: vm "OBSD-Stable-alt.vm" registered (disabled)
> > > > vm_register: registering vm 3
> > > > /etc/vm.conf:53: vm "OBSDSnap64.vm" registered (disabled)
> > > > config_setconfig: setting config
> > > > vm_priv_brconfig: interface bridge0 description switch1-local
> > > > vm_priv_brconfig: interface bridge1 description switch2-internal
> > > > vm_priv_brconfig: interface bridge0 description switch3-wired
> > > > vmd_configure: not creating vm OBSD-Stable.vm (disabled)
> > > > vmd_configure: not creating vm OBSD-Stable-alt.vm (disabled)
> > > > vmd_configure: not creating vm OBSDSnap64.vm (disabled)
> > > > config_getconfig: priv retrieving config
> > > > config_getconfig: control retrieving config
> > > > config_getconfig: vmm retrieving config
> > > > vm_opentty: vm OBSDSnap64.vm tty /dev/ttyp3 uid 1000 gid 4 mode 620
> > > > vm_register: registering vm 3
> > > > vm_priv_ifconfig: interface tap0 description vm3-if0-OBSDSnap64.vm
> > > > vm_priv_ifconfig: switch "local" interface bridge0 add tap0
> > > > OBSDSnap64.vm: started vm 3 successfully, tty /dev/ttyp3
> > > > loadfile_bios: loaded BIOS image
> > > > run_vm: initializing hardware for vm OBSDSnap64.vm
> > > > pic_set_elcr: setting level triggered mode for irq 3
> > > > pic_set_elcr: setting level triggered mode for irq 5
> > > > pic_set_elcr: setting level triggered mode for irq 6
> > > > virtio_init: vm "OBSDSnap64.vm" vio0 lladdr fe:e1:ba:d0:eb:ac
> > > > pic_set_elcr: setting level triggered mode for irq 7
> > > > run_vm: starting vcpu threads for vm OBSDSnap64.vm
> > > > vcpu_reset: resetting vcpu 0 for vm 2
> > > > run_vm: waiting on events for VM OBSDSnap64.vm
> > > > vcpu_run_loop: vm 2 / vcpu 0 run ioctl failed: Invalid argument
> > > > vmm_sighdlr: handling signal 20
> > > > vmm_sighdlr: attempting to terminate vm 3
> > > > terminate_vm: terminating vmid 2
> > > > vmm_sighdlr: calling vm_remove
> > > > vm_remove: removing vm id 3 from running config
> > > > vm_remove: calling vm_stop
> > > > vm_stop: stopping vm 3
> > > > vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 3 ret 22
> > > > vmd_dispatch_vmm: about to stop vm id 3
> > > > vm_stop: stopping vm 3
> > > > vm_opentty: vm OBSDSnap64.vm tty /dev/ttyp4 uid 1000 gid 4 mode 620
> > > > vm_register: registering vm 3
> > > > vm_priv_ifconfig: interface tap0 description vm3-if0-OBSDSnap64.vm
> > > > vm_priv_ifconfig: switch "local" interface bridge0 add tap0
> > > > OBSDSnap64.vm: started vm 3 successfully, tty /dev/ttyp4
> > > > loadfile_bios: loaded BIOS image
> > > > run_vm: initializing hardware for vm OBSDSnap64.vm
> > > > pic_set_elcr: setting level triggered mode for irq 3
> > > > pic_set_elcr: setting level triggered mode for irq 5
> > > > pic_set_elcr: setting level triggered mode for irq 6
> > > > virtio_init: vm "OBSDSnap64.vm" vio0 lladdr fe:e1:ba:d0:eb:ac
> > > > pic_set_elcr: setting level triggered mode for irq 7
> > > > run_vm: starting vcpu threads for vm OBSDSnap64.vm
> > > > vcpu_reset: resetting vcpu 0 for vm 3
> > > > run_vm: waiting on events for VM OBSDSnap64.vm
> > > > vcpu_run_loop: vm 3 / vcpu 0 run ioctl failed: Invalid argument
> > > > vmm_sighdlr: handling signal 20
> > > > vmm_sighdlr: attempting to terminate vm 3
> > > > terminate_vm: terminating vmid 3
> > > > vmm_sighdlr: calling vm_remove
> > > > vm_remove: removing vm id 3 from running config
> > > > vm_remove: calling vm_stop
> > > > vm_stop: stopping vm 3
> > > > vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 3 ret 22
> > > > vmd_dispatch_vmm: about to stop vm id 3
> > > > vm_stop: stopping vm 3
> > > >
> > > > ############################
> > > > Contents of vm.conf:
> > > > ############################
> > > > switch "local" {
> > > > interface bridge0
> > > > }
> > > >
> > > > switch "internal" {
> > > > interface bridge1
> > > > }
> > > >
> > > > switch "wired" {
> > > > interface bridge0
> > > > }
> > > >
> > > > # OpenBSD Stable
> > > > vm "OBSD-Stable.vm" {
> > > > disable
> > > > owner axon
> > > > memory 512M
> > > > disk "/home/axon/vmm/obsd-stable.img"
> > > > interface {
> > > > switch "local"
> > > > lladdr fe:e1:ba:d0:eb:ab
> > > > }
> > > > # interface {
> > > > # switch "local"
> > > > # lladdr fe:e1:ba:d0:eb:0b
> > > > # }
> > > > }
> > > >
> > > >
> > > > # OpenBSD Stable alternate
> > > > vm "OBSD-Stable-alt.vm" {
> > > > disable
> > > > owner axon
> > > > memory 256M
> > > > disk "/home/axon/vmm/obsd-stable-alt.img"
> > > > interface {
> > > > switch "local"
> > > > lladdr fe:e1:ba:d0:eb:ad
> > > > }
> > > > }
> > > >
> > > > # OpenBSD amd64 Snapshot
> > > > vm "OBSDSnap64.vm" {
> > > > disable
> > > > owner axon
> > > > memory 256M
> > > > disk "/home/axon/vmm/obsd-snap64.img"
> > > > interface {
> > > > switch "local"
> > > > lladdr fe:e1:ba:d0:eb:ac
> > > > }
> > > > }
> > > >
> > > >
> > > > >How-To-Repeat:
> > > > On this system (Acer Aspire 5733Z with upgrades), any
> attempt to
> > > > start a vm as a user or root will fail.
> > > >
> > > > >Fix:
> > > > N/A
> > > >
> > > > dmesg:
> > > > OpenBSD 6.3-current (GENERIC.MP) #49: Sat Jun 23 09:32:05 MDT 2018
> > > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/
> GENERIC.MP
> > > > real mem = 8227655680 (7846MB)
> > > > avail mem = 7902208000 (7536MB)
> > > > mpath0 at root
> > > > scsibus0 at mpath0: 256 targets
> > > > mainbus0 at root
> > > > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9d90 (47 entries)
> > > > bios0: vendor Acer version "V1.07" date 11/07/2011
> > > > bios0: Acer Aspire 5733Z
> > > > acpi0 at bios0: rev 2
> > > > acpi0: sleep states S0 S3 S4 S5
> > > > acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT DMAR SSDT
> SSDT
> > > > SSDT
> > > > acpi0: wakeup devices AZAL(S3) P0P1(S4) EHC1(S3) USB1(S3) USB2(S3)
> > > USB3(S3)
> > > > USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) PEG5(S4)
> > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > > > acpihpet0 at acpi0: 14318179 Hz
> > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > > cpu0 at mainbus0: apid 0 (boot processor)
> > > > cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.85 MHz
> > > > cpu0:
> > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> > > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> > > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> > > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > > > cpu0: 256KB 64b/line 8-way L2 cache
> > > > cpu0: smt 0, core 0, package 0
> > > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > > > cpu0: apic clock running at 133MHz
> > > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> > > > cpu1 at mainbus0: apid 1 (application processor)
> > > > cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz
> > > > cpu1:
> > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> > > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> > > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> > > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > > > cpu1: 256KB 64b/line 8-way L2 cache
> > > > cpu1: smt 1, core 0, package 0
> > > > cpu2 at mainbus0: apid 4 (application processor)
> > > > cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz
> > > > cpu2:
> > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> > > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> > > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> > > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > > > cpu2: 256KB 64b/line 8-way L2 cache
> > > > cpu2: smt 0, core 2, package 0
> > > > cpu3 at mainbus0: apid 5 (application processor)
> > > > cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz
> > > > cpu3:
> > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> > > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> > > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> > > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > > > cpu3: 256KB 64b/line 8-way L2 cache
> > > > cpu3: smt 1, core 2, package 0
> > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > > > , remapped to apid 2
> > > > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> > > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > > acpiprt1 at acpi0: bus -1 (P0P2)
> > > > acpiprt2 at acpi0: bus 3 (P0P1)
> > > > acpiprt3 at acpi0: bus 1 (RP01)
> > > > acpiprt4 at acpi0: bus 2 (RP02)
> > > > acpiprt5 at acpi0: bus -1 (RP03)
> > > > acpiprt6 at acpi0: bus -1 (RP04)
> > > > acpiprt7 at acpi0: bus -1 (RP05)
> > > > acpiprt8 at acpi0: bus -1 (RP06)
> > > > acpiprt9 at acpi0: bus -1 (RP07)
> > > > acpiprt10 at acpi0: bus -1 (RP08)
> > > > acpiprt11 at acpi0: bus -1 (PEG5)
> > > > acpiec0 at acpi0
> > > > acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > > > acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > > > acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > > > acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > > > "pnp0c14" at acpi0 not configured
> > > > acpibat0 at acpi0: BAT0 model "Li_Ion_4000mA " serial 78da type Lion
> oem
> > > > "SANYO "
> > > > acpiac0 at acpi0: AC unit online
> > > > acpibtn0 at acpi0: PWRB
> > > > acpibtn1 at acpi0: LID0
> > > > acpibtn2 at acpi0: SLPB
> > > > acpicmos0 at acpi0
> > > > "ETD0500" at acpi0 not configured
> > > > "PNP0C14" at acpi0 not configured
> > > > "PNP0C14" at acpi0 not configured
> > > > acpivideo0 at acpi0: GFX0
> > > > acpivout0 at acpivideo0: DD03
> > > > acpivideo1 at acpi0: VGA_
> > > > cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2533, 2399, 2266, 2133,
> 1999,
> > > > 1866, 1733, 1599, 1466, 1333, 1199 MHz
> > > > pci0 at mainbus0 bus 0
> > > > pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
> > > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02
> > > > drm0 at inteldrm0
> > > > intagp0 at inteldrm0
> > > > agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
> > > > inteldrm0: msi
> > > > inteldrm0: 1366x768, 32bpp
> > > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> > > > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > > > "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
> > > > ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2
> int 16
> > > > usb0 at ehci0: USB revision 2.0
> > > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > > 2.00/1.00 addr 1
> > > > azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: msi
> > > > azalia0: codecs: Realtek ALC272
> > > > audio0 at azalia0
> > > > ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
> > > > pci1 at ppb0 bus 1
> > > > bge0 at pci1 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780
> A1
> > > > (0x57780001): msi, address dc:0e:a1:91:7a:b9
> > > > brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
> > > > ppb1 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x05: msi
> > > > pci2 at ppb1 bus 2
> > > > athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int
> 17
> > > > athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 00:25:d3:f4:f8:4b
> > > > ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2
> int 23
> > > > usb1 at ehci1: USB revision 2.0
> > > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > > 2.00/1.00 addr 1
> > > > ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5
> > > > pci3 at ppb2 bus 3
> > > > pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x05
> > > > ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi,
> AHCI 1.3
> > > > ahci0: port 0: 3.0Gb/s
> > > > ahci0: port 1: 1.5Gb/s
> > > > scsibus1 at ahci0: 32 targets
> > > > sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDA12, Z320> SCSI3
> > > 0/direct
> > > > fixed naa.5001b444a668bf8d
> > > > sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
> > > > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, CDRW/DVD GCCT20N, A108>
> ATAPI
> > > > 5/cdrom removable
> > > > ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 2
> > > int 19
> > > > iic0 at ichiic0
> > > > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> > > > spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> > > > itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05
> > > > isa0 at pcib0
> > > > isadma0 at isa0
> > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > > > pckbd0 at pckbc0 (kbd slot)
> > > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > > pms0 at pckbc0 (aux slot)
> > > > wsmouse0 at pms0 mux 0
> > > > pms0: Elantech Touchpad, version 2, firmware 0x40213
> > > > pcppi0 at isa0 port 0x61
> > > > spkr0 at pcppi0
> > > > pci4 at mainbus0 bus 255
> > > > pchb1 at pci4 dev 0 function 0 "Intel QuickPath" rev 0x02
> > > > pchb2 at pci4 dev 0 function 1 "Intel QuickPath" rev 0x02
> > > > pchb3 at pci4 dev 2 function 0 "Intel QPI Link" rev 0x02
> > > > pchb4 at pci4 dev 2 function 1 "Intel QPI Physical" rev 0x02
> > > > pchb5 at pci4 dev 2 function 2 "Intel Reserved" rev 0x02
> > > > pchb6 at pci4 dev 2 function 3 "Intel Reserved" rev 0x02
> > > > vmm0 at mainbus0: VMX/EPT
> > > > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate
> Matching
> > > Hub"
> > > > rev 2.00/0.00 addr 2
> > > > uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD
> > > WebCam"
> > > > rev 2.00/1.02 addr 3
> > > > video0 at uvideo0
> > > > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic
> USB2.0-CRW"
> > > rev
> > > > 2.00/38.82 addr 4
> > > > umass0: using SCSI over Bulk-Only
> > > > scsibus2 at umass0: 2 targets, initiator 0
> > > > sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0
> 0/direct
> > > > removable serial.0bda0138516388200000
> > > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate
> Matching
> > > Hub"
> > > > rev 2.00/0.00 addr 2
> > > > vscsi0 at root
> > > > scsibus3 at vscsi0: 256 targets
> > > > softraid0 at root
> > > > scsibus4 at softraid0: 256 targets
> > > > root on sd0a (7c4cada893c18112.a) swap on sd0b dump on sd0b
> > > > lock order reversal:
> > > > 1st 0xffffff01f7778888 vmmaplk (&map->lock) @
> > > > /usr/src/sys/uvm/uvm_fault.c:1441
> > > > 2nd 0xffff80000015c138 drmdevlk (&dev->struct_mutex) @
> > > > /usr/src/sys/dev/pci/drm/i915/i915_gem.c:1801
> > > > lock order "&dev->struct_mutex"(rwlock) -> "&map->lock"(rwlock) first
> > > seen
> > > > at:
> > > > #0 witness_checkorder+0x4c0
> > > > #1 _rw_enter+0x68
> > > > #2 vm_map_lock_ln+0xbc
> > > > #3 uvm_map+0x1a1
> > > > #4 km_alloc+0x16a
> > > > #5 bus_space_map+0x159
> > > > #6 i965_alloc_ifp+0xc1
> > > > #7 intel_gtt_chipset_setup+0x1b1
> > > > #8 intel_enable_gtt+0x26
> > > > #9 i915_gem_init_hw+0x43
> > > > #10 i915_gem_init+0x24e
> > > > #11 i915_driver_load+0xfc1
> > > > #12 inteldrm_attach+0x37f
> > > > #13 config_attach+0x20e
> > > > #14 pci_probe_device+0x501
> > > > #15 pci_enumerate_bus+0xb7
> > > > #16 config_attach+0x20e
> > > > #17 mainbus_attach+0x24a
> > > > #18 config_attach+0x20e
> > > > lock order "&map->lock"(rwlock) -> "&dev->struct_mutex"(rwlock) first
> > > seen
> > > > at:
> > > > #0 witness_checkorder+0x4c0
> > > > #1 _rw_enter_write+0x53
> > > > #2 i915_gem_object_wait_rendering__nonblocking+0x1fa
> > > > #3 i915_gem_fault+0x144
> > > > #4 drm_fault+0x18a
> > > > #5 uvm_fault+0x743
> > > > #6 pageflttrap+0x14c
> > > > #7 trap+0x2b2
> > > > #8 recall_trap+0x8
> > > >
> > > > usbdevs:
> > > > Controller /dev/usb0:
> > > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> > > > Intel(0x8086), rev 1.00
> > > > port 1 addr 2: high speed, self powered, config 1, Rate Matching
> > > > Hub(0x0020), Intel(0x8087), rev 0.00
> > > > port 1 addr 3: high speed, power 500 mA, config 1, 1.3M HD
> > > > WebCam(0xd250), SuYin(0x064e), rev 1.02, iSerialNumber
> > > > HF1316-A821-HN01-VA-R01.00.02
> > > > port 2 addr 4: high speed, power 500 mA, config 1,
> USB2.0-CRW(0x0138),
> > > > Generic(0x0bda), rev 38.82, iSerialNumber 20090516388200000
> > > > port 3 powered
> > > > port 4 powered
> > > > port 5 powered
> > > > port 6 powered
> > > > port 2 powered
> > > > Controller /dev/usb1:
> > > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> > > > Intel(0x8086), rev 1.00
> > > > port 1 addr 2: high speed, self powered, config 1, Rate Matching
> > > > Hub(0x0020), Intel(0x8087), rev 0.00
> > > > port 1 powered
> > > > port 2 powered
> > > > port 3 powered
> > > > port 4 powered
> > > > port 5 powered
> > > > port 6 powered
> > > > port 7 powered
> > > > port 8 powered
> > > > port 2 powered
> > >
>
