the same operating system and same firmware works fine when I connect to a wpa2 enabled ap with an SSID without a space
if that is any help Tom Smyth On Wed, 17 Apr 2019 at 01:12, Tom Smyth <tom.sm...@wirelessconnect.eu> wrote: > > Hello All, > I tried out 6.5 and tried joining a network with a space in the SSID, > the network was a hotel network that was open. > I tried editing the hostname.iwn0 config file with > join "NETBSSID with a space" > > i tried editing the hostname.iwn0 config file with > nwid "NETBSSID with a space" > > i also tried replacing the " with ' demark the SSID name > > when running sh /etc/netstart iwn0 > i got a iwn0 no link ... sleeping message > > i tried using join with ifconfig > and nwid with ifconfig. > > I tried forcing the iwn0 interface up ... i tried running dhclient ... > > I dont know much about the access point as I was only there during the night > but I know it worked on a windows and android device... > the only thing unsual about the ap > > I ran the fwupdate also and it was up to date on the laptop. > > dmesg below ... for info ... > > OpenBSD 6.5 (GENERIC.MP) #3: Sat Apr 13 14:48:43 MDT 2019 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 16845979648 (16065MB) > avail mem = 16325808128 (15569MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9c000 (68 entries) > bios0: vendor LENOVO version "G1ETB8WW (2.78 )" date 09/19/2018 > bios0: LENOVO 2349SW8 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT > FPDT ASF! UEFI UEFI POAT SSDT SSDT DMAR UEFI DBG2 > acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) > EHC1(S3) EHC2(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 1197.52 MHz, 06-3a-09 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 1197.29 MHz, 06-3a-09 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 > acpimcfg0: addr 0xf8000000, bus 0-63 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG_) > acpiprt2 at acpi0: bus 2 (EXP1) > acpiprt3 at acpi0: bus 3 (EXP2) > acpiprt4 at acpi0: bus 4 (EXP3) > acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2 > acpitz0 at acpi0: critical temperature is 200 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 > acpicmos0 at acpi0 > acpibat0 at acpi0: BAT0 model "45N1173" serial 31367 type LION oem "SANYO" > acpiac0 at acpi0: AC unit offline > "LEN0078" at acpi0 not configured > acpithinkpad0 at acpi0 > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > "PNP0C14" at acpi0 not configured > acpivideo0 at acpi0: VID_ > acpivout at acpivideo0 not configured > acpivideo1 at acpi0: VID_ > cpu0: Enhanced SpeedStep 1197 MHz: speeds: 2601, 2600, 2500, 2400, > 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 > MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1366x768, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0 > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 28:d2:44:53:b4:58 > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi > pci1 at ppb0 bus 2 > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 16 > sdhc0: SDHC 3.0, 50 MHz base clock > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi > pci2 at ppb1 bus 3 > iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev > 0x34: msi, MIMO 2T2R, MoW, address e0:9d:31:56:8e:38 > ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > pci3 at ppb2 bus 4 > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > ahci0: port 1: 1.5Gb/s > ahci0: port 2: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, SPCC Solid State, SAFM> SCSI3 > 0/direct fixed t10.ATA_SPCC_Solid_State_Disk_EB84076617B201176831 > sd0: 915715MB, 512 bytes/sector, 1875385008 sectors, thin > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT80N, LT21> ATAPI > 5/cdrom removable > sd1 at scsibus1 targ 2 lun 0: <ATA, Samsung SSD 860, RVT4> SCSI3 > 0/direct fixed naa.5002538e700bc616 > sd1: 238475MB, 512 bytes/sector, 488397168 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int > 18 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared > pch fifo underrun on pch transcoder A > error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH > transcoder A FIFO underrun > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching > Hub" rev 2.00/0.00 addr 2 > uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony > Electronics Co., Ltd. Integrated Camera" rev 2.00/5.20 addr 3 > video0 at uvideo0 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching > Hub" rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed > sd2: 238471MB, 512 bytes/sector, 488389489 sectors > root on sd2a (5cf8e277253f15df.a) swap on sd2b dump on sd2b > > > -- > Kindest regards, > Tom Smyth -- Kindest regards, Tom Smyth The information contained in this E-mail is intended only for the confidential use of the named recipient. If the reader of this message is not the intended recipient or the person responsible for delivering it to the recipient, you are hereby notified that you have received this communication in error and that any review, dissemination or copying of this communication is strictly prohibited. If you have received this in error, please notify the sender immediately by telephone at the number above and erase the message You are requested to carry out your own virus check before opening any attachment.
