Thank you, Works well
Regards, Kihaguru On Mon, Sep 2, 2019 at 6:07 PM Otto Moerbeek <o...@drijf.net> wrote: > On Mon, Sep 02, 2019 at 05:32:53PM +0300, Kihaguru Gathura wrote: > > > Hi, > > > > Unable to boot with the following message > > > > open /pci@83,4000/FJSV,ulsa@2,1/disk@0,0:a/etc/random.seed: Invalid > argument > > open /pci@83,4000/FJSV,ulsa@2,1/disk@0,0:a/bsd: Invalid argument > > > > Not sure the issue with softraid setup detailed below. Any assistance > > highly appreciated. > > > > Thanks and regards, > > Did you setup boot-file? > > Try > > boot sr0a:/bsd > > On the OpenBSD boot loader prompt. > > If that works you should setup boot-file as described in > > See http://man.openbsd.org/man8/sparc64/boot_sparc64.8 > > -Otto > > > > > Kihaguru. > > > > > > {0} ok boot cdrom > > Resetting ... > > > > Sep 02 08:57:03 GMT 2019 XSCF:I::[02030100] Start reset sequence > > Sep 02 08:57:04 GMT 2019 XSCF:I::[02030200] Reset released... > > > > Sep 02 08:57:07 GMT 2019 PowerOn SelfTest start > > POST:Testing Flash/SRAM > > POST:Testing SC > > POST:Testing XSCF > > POST:Banner > > POST:FATAL check > > POST:Testing Timer1 > > POST:Testing Tick > > POST:Testing MMU > > POST:Testing CPU Type > > POST:Testing DTAG > > POST:Memory Probe > > POST:Testing Memory > > POST:Testing Softint > > POST:Testing U2P > > POST:Testing Slave Device > > POST:Testing Master Device > > POST:System Configure > > POST:OBP Start > > screen not found. > > keyboard not found. > > Keyboard not present. Using ttya for input and output. > > > > Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V, No Keyboard > > OpenBoot 3.18.1-1, 16384 MB memory installed > > Ethernet address 0:b:5d:f3:a7:5c, Host ID: 80f2a75c. > > XSCF Version: 4.12.1 > > > > > > > > Executing last command: boot cdrom > > Boot device: /pci@83,4000/ide@d/cdrom@0,0:f File and args: > > OpenBSD IEEE 1275 Bootblock 1.4 > > ..>> OpenBSD BOOT 1.12 > > Trying bsd... > > open /pci@83,4000/ide@d/cdrom@0,0:f/etc/random.seed: No such file or > > directory > > Booting /pci@83,4000/ide@d/cdrom@0,0:f/bsd > > 4145224@0x1000000+8120@0x13f4048+3255632@0x1c00000+938672@0x1f1ad50 > > symbols @ 0xfeae4340 139 start=0x1000000 > > console is /pci@83,4000/isa@7/su@0,3f8 > > Copyright (c) 1982, 1986, 1989, 1991, 1993 > > The Regents of the University of California. All rights > reserved. > > Copyright (c) 1995-2019 OpenBSD. All rights reserved. > > https://www.OpenBSD.org > > > > OpenBSD 6.5 (RAMDISK) #156: Sun Apr 14 05:14:17 MDT 2019 > > dera...@sparc64.openbsd.org: > /usr/src/sys/arch/sparc64/compile/RAMDISK > > real mem = 17179869184 (16384MB) > > avail mem = 16869081088 (16087MB) > > mainbus0 at root: Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V > > cpu0 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz > > cpu0: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K > > external (64 b/l) > > "FJSV,SPARC64-V" at mainbus0 not configured > > psycho0 at mainbus0 addr 0xfffb2000: SUNW,psycho, impl 0, version 4, ign > c0 > > psycho0: bus range 0-0, PCI bus 0 > > psycho0: dvma map fe000000-ffffffff, STC0 enabled > > pci0 at psycho0 > > ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 > > "FJSV,scfc" at ebus0 addr 210000-210085, 220000-220031, 260000-260001, > > 270000-28ffff ivec 0x23 not configured > > "FJSV,flashprom" at ebus0 addr 0-3fffff not configured > > clock1 at ebus0 addr 250000-251fff: mk48t59 > > "FJSV,panel" at ebus0 addr 210011-210011 ivec 0x25 not configured > > ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00 > > com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo > > com0: console > > com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo > > hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0xe1, address > > 00:0b:5d:f3:a7:5c > > nsphyter0 at hme0 phy 1: DP83843 10/100 PHY, rev. 0 > > mpi0 at pci0 dev 2 function 1 "Symbios Logic 53c1030" rev 0x07: ivec 0xe0 > > mpi0: 0, firmware 1.0.12.0 > > scsibus0 at mpi0: 16 targets, initiator 7 > > sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 > > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR > > sd0: 70007MB, 512 bytes/sector, 143374738 sectors > > sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2 > > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL > > sd1: 70007MB, 512 bytes/sector, 143374738 sectors > > mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 > > mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1 > > pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4: > DMA, > > channel 0 configured to native-PCI, channel 1 configured to native-PCI > > pciide0: using ivec 0xe4 for native-PCI interrupt > > atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus1 at atapiscsi0: 2 targets > > cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PY28> ATAPI > > 5/cdrom removable > > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > > pciide0: channel 1 disabled (no drives) > > ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec > 0xe9, > > version 1.0, legacy support > > usb0 at ohci0: USB revision 1.0 > > uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub" rev > > 1.00/1.00 addr 1 > > psycho1 at mainbus0 addr 0xfff9e000: SUNW,psycho, impl 0, version 4, ign > c0 > > psycho1: bus range 128-128, PCI bus 128 > > psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled > > pci1 at psycho1 > > bge0 at pci1 dev 1 function 0 "Fujitsu PRIMEPOWER250/450 LAN" rev 0x02, > > BCM5702/5703 A2 (0x1002): ivec 0xc0, address 00:0b:5d:f4:27:5c > > brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 > > timer0 at mainbus0 addr 0xfff8bc00 ivec 0xec, 0xed > > softraid0 at root > > scsibus2 at softraid0: 256 targets > > bootpath: /pci@83,4000/ide@d,0/cdrom@0,0:f > > root on rd0a swap on rd0b dump on rd0b > > erase ^?, werase ^W, kill ^U, intr ^C, status ^T > > > > Welcome to the OpenBSD/sparc64 6.5 installation program. > > (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? I > > At any prompt except password prompts you can escape to a shell by > > typing '!'. Default answers are shown in []'s and are selected by > > pressing RETURN. You can exit this program at any time by pressing > > Control-C, but this can leave your system in an inconsistent state. > > > > Terminal type? [sun] > > ~ > > ~ > > ~ > > ~ > > Available disks are: sd0 sd1. > > Which disk is the root disk? ('?' for details) [sd0] ! > > Type 'exit' to return to install. > > www# dd if=/dev/urandom of=/dev/rsd0c bs=1m > > dd: /dev/rsd0c: short write on character device > > dd: /dev/rsd0c: end of device > > 70008+0 records in > > 70007+1 records out > > 73407865856 bytes transferred in 2026.673 secs (36220859 bytes/sec) > > www# dd if=/dev/urandom of=/dev/rsd1c bs=1m > > dd: /dev/rsd1c: short write on character device > > dd: /dev/rsd1c: end of device > > 70008+0 records in > > 70007+1 records out > > 73407865856 bytes transferred in 2029.361 secs (36172892 bytes/sec) > > www# cd /dev > > www# ls > > MAKEDEV rd0c rsd1d rsd2n rwd1g sd0a sd1k urandom > wd1j > > bio rfd0a rsd1e rsd2o rwd1h sd0b sd1l wd0a > wd1k > > bpf rfd0b rsd1f rsd2p rwd1i sd0c sd1m wd0b > wd1l > > bpf0 rfd0c rsd1g rst0 rwd1j sd0d sd1n wd0c > wd1m > > cd0a rfd0i rsd1h rwd0a rwd1k sd0e sd1o wd0d > wd1n > > cd0c rrd0a rsd1i rwd0b rwd1l sd0f sd1p wd0e > wd1o > > console rrd0c rsd1j rwd0c rwd1m sd0g sd2a wd0f > wd1p > > diskmap rsd0a rsd1k rwd0d rwd1n sd0h sd2b wd0g > wd2a > > enrst0 rsd0b rsd1l rwd0e rwd1o sd0i sd2c wd0h > wd2b > > erst0 rsd0c rsd1m rwd0f rwd1p sd0j sd2d wd0i > wd2c > > fd0a rsd0d rsd1n rwd0g rwd2a sd0k sd2e wd0j > wd2d > > fd0b rsd0e rsd1o rwd0h rwd2b sd0l sd2f wd0k > wd2e > > fd0c rsd0f rsd1p rwd0i rwd2c sd0m sd2g wd0l > wd2f > > fd0i rsd0g rsd2a rwd0j rwd2d sd0n sd2h wd0m > wd2g > > klog rsd0h rsd2b rwd0k rwd2e sd0o sd2i wd0n > wd2h > > kmem rsd0i rsd2c rwd0l rwd2f sd0p sd2j wd0o > wd2i > > ksyms rsd0j rsd2d rwd0m rwd2g sd1a sd2k wd0p > wd2j > > mdesc rsd0k rsd2e rwd0n rwd2h sd1b sd2l wd1a > wd2k > > mem rsd0l rsd2f rwd0o rwd2i sd1c sd2m wd1b > wd2l > > nrst0 rsd0m rsd2g rwd0p rwd2j sd1d sd2n wd1c > wd2m > > null rsd0n rsd2h rwd1a rwd2k sd1e sd2o wd1d > wd2n > > openprom rsd0o rsd2i rwd1b rwd2l sd1f sd2p wd1e > wd2o > > random rsd0p rsd2j rwd1c rwd2m sd1g stderr wd1f > wd2p > > rcd0a rsd1a rsd2k rwd1d rwd2n sd1h stdin wd1g > zero > > rcd0c rsd1b rsd2l rwd1e rwd2o sd1i stdout wd1h > > rd0a rsd1c rsd2m rwd1f rwd2p sd1j tty wd1i > > www# disklabel -E sd0 > > This platform requires that partition offsets/sizes be on cylinder > > boundaries. > > Partition offsets/sizes will be rounded to the nearest cylinder > > automatically. > > Label editor (enter '?' for help at any prompt) > > sd0> p > > OpenBSD area: 0-143374738; size: 143374738; free: 143374738 > > # size offset fstype [fsize bsize cpg] > > c: 143374738 0 unused > > sd0> q > > No label changes. > > www# disklabel -E sd1 > > This platform requires that partition offsets/sizes be on cylinder > > boundaries. > > Partition offsets/sizes will be rounded to the nearest cylinder > > automatically. > > Label editor (enter '?' for help at any prompt) > > sd1> p > > OpenBSD area: 0-143374738; size: 143374738; free: 143374738 > > # size offset fstype [fsize bsize cpg] > > c: 143374738 0 unused > > sd1> q > > No label changes. > > www# disklabel -E sd2 > > disklabel: /dev/rsd2c: Device not configured > > www# fdisk -iy sd0 > > sh: fdisk: not found > > www# disklabel -E sd0 > > This platform requires that partition offsets/sizes be on cylinder > > boundaries. > > Partition offsets/sizes will be rounded to the nearest cylinder > > automatically. > > Label editor (enter '?' for help at any prompt) > > sd0> a > > partition: [a] > > offset: [0] > > size: [143374738] * > > FS type: [4.2BSD] RAID > > sd0> w > > sd0> q > > No label changes. > > www# disklabel sd0 > layout > > www# disklabel -R sd1 layout > > www# rm layout > > www# bioctl -c 1 -l sd0a,sd1a softraid0 > > sd2 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 1, 006> SCSI2 0/direct > fixed > > sd2: 70002MB, 512 bytes/sector, 143366016 sectors > > softraid0: RAID 1 volume attached as sd2 > > www# dd if=/dev/zero of=/dev/rsd2c bs=1m count=1 > > 1+0 records in > > 1+0 records out > > 1048576 bytes transferred in 0.033 secs (31058796 bytes/sec) > > www# bioctl sd2 > > Volume Status Size Device > > softraid0 0 Online 73403400192 sd2 RAID1 > > 0 Online 73403400192 0:0.0 noencl <sd0a> > > 1 Online 73403400192 0:1.0 noencl <sd1a> > > www# exit > > Available disks are: sd0 sd1 sd2. > > Which disk is the root disk? ('?' for details) [sd0] sd2 > > The auto-allocated layout for sd2 is: > > # size offset fstype [fsize bsize cpg] > > a: 1.0G 0 4.2BSD 2048 16384 1 # / > > b: 5.9G 2104515 swap > > c: 68.4G 0 unused > > d: 4.0G 14442435 4.2BSD 2048 16384 1 # /tmp > > e: 7.6G 22844430 4.2BSD 2048 16384 1 # /var > > f: 2.0G 38829105 4.2BSD 2048 16384 1 # /usr > > g: 1.0G 43038135 4.2BSD 2048 16384 1 # > > /usr/X11R6 > > h: 9.7G 45142650 4.2BSD 2048 16384 1 # > > /usr/local > > i: 2.0G 65497005 4.2BSD 2048 16384 1 # > /usr/src > > j: 6.0G 69706035 4.2BSD 2048 16384 1 # > /usr/obj > > k: 29.1G 82300995 4.2BSD 2048 16384 1 # /home > > Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] > > /dev/rsd2a: 1027.6MB in 2104512 sectors of 512 bytes > > 6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each > > /dev/rsd2k: 29815.9MB in 61063064 sectors of 512 bytes > > 148 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each > > /dev/rsd2d: 4102.5MB in 8401992 sectors of 512 bytes > > 21 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each > > /dev/rsd2f: 2055.2MB in 4209028 sectors of 512 bytes > > 11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each > > /dev/rsd2g: 1027.6MB in 2104512 sectors of 512 bytes > > 6 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each > > /dev/rsd2h: 9938.6MB in 20354352 sectors of 512 bytes > > 50 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each > > /dev/rsd2j: 6149.9MB in 12594960 sectors of 512 bytes > > 31 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each > > /dev/rsd2i: 2055.2MB in 4209028 sectors of 512 bytes > > 11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each > > /dev/rsd2e: 7805.0MB in 15984672 sectors of 512 bytes > > 39 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each > > Available disks are: sd0 sd1. > > Which disk do you wish to initialize? (or 'done') [done] > > /dev/sd2a (f17019aae84f4ec9.a) on /mnt type ffs (rw, asynchronous, local) > > /dev/sd2k (f17019aae84f4ec9.k) on /mnt/home type ffs (rw, asynchronous, > > local, nodev, nosuid) > > /dev/sd2d (f17019aae84f4ec9.d) on /mnt/tmp type ffs (rw, asynchronous, > > local, nodev, nosuid) > > /dev/sd2f (f17019aae84f4ec9.f) on /mnt/usr type ffs (rw, asynchronous, > > local, nodev) > > /dev/sd2g (f17019aae84f4ec9.g) on /mnt/usr/X11R6 type ffs (rw, > > asynchronous, local, nodev) > > /dev/sd2h (f17019aae84f4ec9.h) on /mnt/usr/local type ffs (rw, > > asynchronous, local, nodev) > > /dev/sd2j (f17019aae84f4ec9.j) on /mnt/usr/obj type ffs (rw, > asynchronous, > > local, nodev, nosuid) > > /dev/sd2i (f17019aae84f4ec9.i) on /mnt/usr/src type ffs (rw, > asynchronous, > > local, nodev, nosuid) > > /dev/sd2e (f17019aae84f4ec9.e) on /mnt/var type ffs (rw, asynchronous, > > local, nodev, nosuid) > > > > Let's install the sets! > > Location of sets? (cd0 disk http or 'done') [http] > > HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none] > > HTTP Server? (hostname, list#, 'done' or '?') [ftp.OpenBSD.org] > > Server directory? [pub/OpenBSD/6.5/sparc64] > > > > Select sets by entering a set name, a file name pattern or 'all'. > De-select > > sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled > '[X]'. > > [X] bsd [X] base65.tgz [X] game65.tgz [X] xfont65.tgz > > [X] bsd.mp [X] comp65.tgz [X] xbase65.tgz [X] > xserv65.tgz > > [X] bsd.rd [X] man65.tgz [X] xshare65.tgz > > Set name(s)? (or 'abort' or 'done') [done] -game* -x* > > [X] bsd [X] base65.tgz [ ] game65.tgz [ ] xfont65.tgz > > [X] bsd.mp [X] comp65.tgz [ ] xbase65.tgz [ ] > xserv65.tgz > > [X] bsd.rd [X] man65.tgz [ ] xshare65.tgz > > Set name(s)? (or 'abort' or 'done') [done] > > Get/Verify SHA256.sig 100% |**************************| 1974 > 00:00 > > Signature Verified > > Get/Verify bsd 100% |**************************| 11005 KB > 00:14 > > Get/Verify bsd.mp 100% |**************************| 11076 KB > 00:14 > > Get/Verify bsd.rd 100% |**************************| 2699 KB > 00:09 > > Get/Verify base65.tgz 100% |**************************| 160 MB > 01:41 > > Get/Verify comp65.tgz 100% |**************************| 68832 KB > 01:39 > > Get/Verify man65.tgz 100% |**************************| 7392 KB > 00:12 > > Installing bsd 100% |**************************| 11005 KB > 00:00 > > Installing bsd.mp 100% |**************************| 11076 KB > 00:00 > > Installing bsd.rd 100% |**************************| 2699 KB > 00:00 > > Installing base65.tgz 100% |**************************| 160 MB > 00:15 > > Extracting etc.tgz 100% |**************************| 260 KB > 00:00 > > Installing comp65.tgz 100% |**************************| 68832 KB > 00:09 > > Installing man65.tgz 100% |**************************| 7392 KB > 00:01 > > Location of sets? (cd0 disk http or 'done') [done] > > Saving configuration files... done. > > Making all device nodes... done. > > Multiprocessor machine; using bsd.mp instead of bsd. > > Relinking to create unique kernel... done. > > > > CONGRATULATIONS! Your OpenBSD install has been successfully completed! > > > > When you login to your new system the first time, please read your mail > > using the 'mail' command. > > > > Exit to (S)hell, (H)alt or (R)eboot? [halt] R > > syncing disks... done > > rebooting > > > > Resetting ... > > > > Sep 02 13:11:10 GMT 2019 XSCF:I::[02030100] Start reset sequence > > Sep 02 13:11:10 GMT 2019 XSCF:I::[02030200] Reset released... > > > > Sep 02 13:11:13 GMT 2019 PowerOn SelfTest start > > POST:Testing Flash/SRAM > > POST:Testing SC > > POST:Testing XSCF > > POST:Banner > > POST:FATAL check > > POST:Testing Timer1 > > POST:Testing Tick > > POST:Testing MMU > > POST:Testing CPU Type > > POST:Testing DTAG > > POST:Memory Probe > > POST:Testing Memory > > POST:Testing Softint > > POST:Testing U2P > > POST:Testing Slave Device > > POST:Testing Master Device > > POST:System Configure > > POST:OBP Start > > screen not found. > > keyboard not found. > > Keyboard not present. Using ttya for input and output. > > > > Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V, No Keyboard > > OpenBoot 3.18.1-1, 16384 MB memory installed > > Ethernet address 0:b:5d:f3:a7:5c, Host ID: 80f2a75c. > > XSCF Version: 4.12.1 > > > > > > > > Executing last command: boot > > Boot device: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0 File and args: > > OpenBSD IEEE 1275 Bootblock 1.4 > > >> OpenBSD BOOT 1.12 > > Can't read disk label. > > Can't open disk label package > > sr0* > > Trying bsd... > > open /pci@83,4000/FJSV,ulsa@2,1/disk@0,0:a/etc/random.seed: Invalid > argument > > open /pci@83,4000/FJSV,ulsa@2,1/disk@0,0:a/bsd: Invalid argument > > > > Boot: >
