Hi,

Not sure if the subject is good, or if this is even relevant for OpenBSD, but
I thought I'd put it out there.  I recently got a KVM switch with which I can
control 4 PC's on one monitor.  The exact label of it is 
"4x1 USB HDMI KVM Switch".  When I boot a recent -current

kern.version=OpenBSD 6.6-beta (GENERIC.MP) #313: Tue Sep 10 23:30:52 MDT 2019
    [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP

The screen goes blank almost like the KVM switch was triggered to go the next
PC (I don't know for sure because the next PC is still off).  Either way I 
have to select to OpenBSD after a while because if I do that too quickly I 
lose keyboard and mouse USB descriptors and can't input through this switch.

If this rings a bell with someone and they have a fix, let me know.  Could the
USB keyboard sequences cause this blanking?  The KVM switch can be switched
from the keyboard by pressing caps-lock twice and then a command key.  I guess
this spies the USB bus for caps lock key presses, does the DRM code or the
attaching of the keyboard set the caps lock key?

Below my signature I'll provide a dmesg from this machine.

Best Regards,
-peter


OpenBSD 6.6-beta (GENERIC.MP) #313: Tue Sep 10 23:30:52 MDT 2019
    [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34208063488 (32623MB)
avail mem = 33158647808 (31622MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec1f0 (91 entries)
bios0: vendor American Megatrends Inc. version "2004" date 06/05/2014
bios0: ASUS All Series
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT LPIT SSDT SSDT MCFG HPET SSDT SSDT DMAR BGRT
acpi0: wakeup devices RP01(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) PXSX(S4) 
PXSX(S4) RP06(S4) PXSX(S4) PXSX(S4) RP08(S4) PXSX(S4) UAR1(S4) GLAN(S4) 
EHC1(S4) EHC2(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1275 v3 @ 3.50GHz, 3498.40 MHz, 06-3c-03
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
tsc_timecounter_init: TSC skew=0 observed drift=0
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
TSC skew=0
cpu1: Intel(R) Xeon(R) CPU E3-1275 v3 @ 3.50GHz, 3497.99 MHz, 06-3c-03
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
tsc_timecounter_init: TSC skew=0 observed drift=0
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
TSC skew=-2
cpu2: Intel(R) Xeon(R) CPU E3-1275 v3 @ 3.50GHz, 3497.98 MHz, 06-3c-03
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
tsc_timecounter_init: TSC skew=-2 observed drift=0
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
TSC skew=-2
cpu3: Intel(R) Xeon(R) CPU E3-1275 v3 @ 3.50GHz, 3497.98 MHz, 06-3c-03
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
tsc_timecounter_init: TSC skew=-2 observed drift=0
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (RP01)
acpiprt2 at acpi0: bus 6 (RP03)
acpiprt3 at acpi0: bus 7 (RP06)
acpiprt4 at acpi0: bus 8 (RP08)
acpiprt5 at acpi0: bus 1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpipwrres1 at acpi0: FN01, resource for FAN1
acpipwrres2 at acpi0: FN02, resource for FAN2
acpipwrres3 at acpi0: FN03, resource for FAN3
acpipwrres4 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
"pnp0c14" at acpi0 not configured
acpibtn0 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0A0A" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 3498 MHz: speeds: 3501, 3500, 3300, 3100, 2900, 2700, 
2500, 2300, 2100, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06
ppb0 at pci0 dev 1 function 0 "Intel Core 4G PCIE" rev 0x06: msi
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 vendor "PLX", unknown product 0x8747 rev 0xba
pci2 at ppb1 bus 2
ppb2 at pci2 dev 8 function 0 vendor "PLX", unknown product 0x8747 rev 0xba: msi
pci3 at ppb2 bus 4
ix0 at pci3 dev 0 function 0 "Intel X550T" rev 0x01: msi, address 
a0:36:9f:f7:8a:68
ix1 at pci3 dev 0 function 1 "Intel X550T" rev 0x01: msi, address 
a0:36:9f:f7:8a:69
ppb3 at pci2 dev 16 function 0 vendor "PLX", unknown product 0x8747 rev 0xba: 
msi
pci4 at ppb3 bus 3
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics P4600" rev 0x06
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x06: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 20
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x05: msi
azalia1: codecs: Realtek ALC1150
audio0 at azalia1
ppb4 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi
pci5 at ppb4 bus 5
ahci0 at pci5 dev 0 function 0 "Marvell 88SE9230 AHCI" rev 0x10: msi, AHCI 1.2
ahci0: port 7: 1.5Gb/s
scsibus1 at ahci0: 32 targets
uk0 at scsibus1 targ 7 lun 0: <Marvell, Console, 1.01> removable
ppb5 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xd5: msi
pci6 at ppb5 bus 6
em0 at pci6 dev 0 function 0 "Intel I210" rev 0x03: msi, address 
bc:ee:7b:dd:2e:5a
ppb6 at pci0 dev 28 function 5 "Intel 8 Series PCIE" rev 0xd5: msi
pci7 at ppb6 bus 7
ahci1 at pci7 dev 0 function 0 "ASMedia ASM1061 AHCI" rev 0x01: msi, AHCI 1.2
scsibus2 at ahci1: 32 targets
ppb7 at pci0 dev 28 function 7 "Intel 8 Series PCIE" rev 0xd5: msi
pci8 at ppb7 bus 8
em1 at pci8 dev 0 function 0 "Intel I210" rev 0x03: msi, address 
bc:ee:7b:dd:2e:5b
ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
pcib0 at pci0 dev 31 function 0 "Intel Z87 LPC" rev 0x05
ahci2 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI 1.3
ahci2: port 1: 6.0Gb/s
ahci2: port 5: 1.5Gb/s
scsibus3 at ahci2: 32 targets
sd0 at scsibus3 targ 1 lun 0: <ATA, Samsung SSD 860, RVQ0> naa.5002538e40f2c28d
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors, thin
cd0 at scsibus3 targ 5 lun 0: <HL-DT-ST, BD-RE BH16NS40, 1.01> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800
spdmem2 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800
spdmem3 at iic0 addr 0x53: 8GB DDR3 SDRAM PC3-12800
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 8 configuration 1 interface 0 "Wacom Co.,Ltd. Intuos PS" 
rev 2.00/1.00 addr 2
uhidev0: iclass 3/0, 192 report ids
uhid0 at uhidev0 reportid 2: input=0, output=0, feature=1
uhid1 at uhidev0 reportid 3: input=0, output=0, feature=1
uhid2 at uhidev0 reportid 4: input=0, output=0, feature=1
uhid3 at uhidev0 reportid 5: input=0, output=0, feature=1
uhid4 at uhidev0 reportid 7: input=0, output=0, feature=9
uhid5 at uhidev0 reportid 8: input=0, output=0, feature=9
uwacom0 at uhidev0 reportid 16: 3 buttons
wsmouse0 at uwacom0 mux 0
uhid6 at uhidev0 reportid 17: input=0, output=0, feature=16
uhid7 at uhidev0 reportid 19: input=0, output=0, feature=1
uhid8 at uhidev0 reportid 20: input=0, output=0, feature=31
uhid9 at uhidev0 reportid 32: input=0, output=0, feature=5
uhid10 at uhidev0 reportid 33: input=0, output=0, feature=1
uhid11 at uhidev0 reportid 34: input=0, output=0, feature=1
uhid12 at uhidev0 reportid 35: input=0, output=0, feature=14
uhid13 at uhidev0 reportid 36: input=0, output=0, feature=31
uhid14 at uhidev0 reportid 37: input=0, output=0, feature=4
uhid15 at uhidev0 reportid 48: input=0, output=0, feature=2
uhid16 at uhidev0 reportid 49: input=0, output=0, feature=33
uhid17 at uhidev0 reportid 50: input=0, output=0, feature=33
uhid18 at uhidev0 reportid 51: input=0, output=0, feature=1
uhid19 at uhidev0 reportid 64: input=0, output=0, feature=10
uhid20 at uhidev0 reportid 192: input=9, output=0, feature=0
uhidev1 at uhub0 port 8 configuration 1 interface 1 "Wacom Co.,Ltd. Intuos PS" 
rev 2.00/1.00 addr 2
uhidev1: iclass 3/0, 3 report ids
uhid21 at uhidev1 reportid 2: input=63, output=0, feature=0
uhid22 at uhidev1 reportid 3: input=63, output=0, feature=0
uhidev2 at uhub0 port 8 configuration 1 interface 2 "Wacom Co.,Ltd. Intuos PS" 
rev 2.00/1.00 addr 2
uhidev2: iclass 3/1, 1 report id
ums0 at uhidev2 reportid 1: 5 buttons
wsmouse1 at ums0 mux 0
uhub3 at uhub0 port 10 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" 
rev 2.00/77.63 addr 3
uhub4 at uhub0 port 13 configuration 1 interface 0 "ASUS Tek. ASM107x" rev 
2.10/1.00 addr 4
uhidev3 at uhub4 port 4 configuration 1 interface 0 "American Power Conversion 
Back-UPS CS 650 FW:817.v9.I USB FW:v9" rev 1.10/0.06 addr 5
uhidev3: iclass 3/0, 98 report ids
upd0 at uhidev3
umass0 at uhub0 port 17 configuration 1 interface 0 "Western Digital My Book 
25EE" rev 3.00/40.04 addr 6
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <WD, My Book 25EE, 4004>
sd1: 3815447MB, 512 bytes/sector, 7814035456 sectors
ses0 at scsibus4 targ 1 lun 1: <WD, SES Device, 4004>
ses0: unable to read enclosure configuration
uhub5 at uhub0 port 20 configuration 1 interface 0 "ASUS Tek. ASM107x" rev 
3.00/1.00 addr 7
uhub6 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 
2.00/0.05 addr 2
uhub7 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 
2.00/0.05 addr 2
vscsi0 at root
scsibus5 at vscsi0: 256 targets
softraid0 at root
scsibus6 at softraid0: 256 targets
sd2 at scsibus6 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd2: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd2a (c4b7579fa9548911.a) swap on sd2b dump on sd2b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhub8 at uhub3 port 2 configuration 1 interface 0 "ROCLA KVM PORT SWITCH" rev 
1.10/1.00 addr 8
uhub9 at uhub8 port 1 configuration 1 interface 0 "Apple, Inc. Keyboard Hub" 
rev 2.00/96.15 addr 9
uhidev4 at uhub9 port 2 configuration 1 interface 0 "Apple Inc. Apple Keyboard" 
rev 2.00/0.74 addr 10
uhidev4: iclass 3/1
ukbd0 at uhidev4: 8 variable keys, 5 key codes, country code 13
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev5 at uhub9 port 2 configuration 1 interface 1 "Apple Inc. Apple Keyboard" 
rev 2.00/0.74 addr 10
uhidev5: no report descriptor
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev4 detached
uhidev5 detached
uhub9 detached
uhub8 detached
uhub8 at uhub3 port 2 configuration 1 interface 0 "ROCLA KVM PORT SWITCH" rev 
1.10/1.00 addr 8
uhub9 at uhub8 port 1 configuration 1 interface 0 "Apple, Inc. Keyboard Hub" 
rev 2.00/96.15 addr 9
uhidev4 at uhub9 port 2 configuration 1 interface 0 "Apple Inc. Apple Keyboard" 
rev 2.00/0.74 addr 10
uhidev4: iclass 3/1
ukbd0 at uhidev4: 8 variable keys, 5 key codes, country code 13
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev5 at uhub9 port 2 configuration 1 interface 1 "Apple Inc. Apple Keyboard" 
rev 2.00/0.74 addr 10
uhidev5: iclass 3/0
uhid23 at uhidev5: input=1, output=0, feature=0
uhidev6 at uhub8 port 2 configuration 1 interface 0 "Logitech USB Optical 
Mouse" rev 2.00/72.00 addr 11
uhidev6: iclass 3/1
ums1 at uhidev6: 3 buttons, Z dir
wsmouse2 at ums1 mux 0
uhidev7 at uhub8 port 3 configuration 1 interface 0 "Alcor Micro USB Multimedia 
Keyboard" rev 1.10/1.22 addr 12
uhidev7: iclass 3/1
ukbd1 at uhidev7: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev8 at uhub8 port 3 configuration 1 interface 1 "Alcor Micro USB Multimedia 
Keyboard" rev 1.10/1.22 addr 12
uhidev8: iclass 3/0, 3 report ids
uhid24 at uhidev8 reportid 2: input=1, output=0, feature=0
uhid25 at uhidev8 reportid 3: input=2, output=0, feature=0
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev4 detached
uhid23 detached
uhidev5 detached
uhub9 detached
wsmouse2 detached
ums1 detached
uhidev6 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ukbd1 detached
uhidev7 detached
uhid24 detached
uhid25 detached
uhidev8 detached
uhub8 detached
uhub8 at uhub3 port 2 configuration 1 interface 0 "ROCLA KVM PORT SWITCH" rev 
1.10/1.00 addr 8
uhub9 at uhub8 port 1 configuration 1 interface 0 "Apple, Inc. Keyboard Hub" 
rev 2.00/96.15 addr 9
uhidev4 at uhub9 port 2 configuration 1 interface 0 "Apple Inc. Apple Keyboard" 
rev 2.00/0.74 addr 10
uhidev4: iclass 3/1
ukbd0 at uhidev4: 8 variable keys, 5 key codes, country code 13
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev5 at uhub9 port 2 configuration 1 interface 1 "Apple Inc. Apple Keyboard" 
rev 2.00/0.74 addr 10
uhidev5: iclass 3/0
uhid23 at uhidev5: input=1, output=0, feature=0
uhidev6 at uhub8 port 2 configuration 1 interface 0 "Logitech USB Optical 
Mouse" rev 2.00/72.00 addr 11
uhidev6: iclass 3/1
ums1 at uhidev6: 3 buttons, Z dir
wsmouse2 at ums1 mux 0
uhidev7 at uhub8 port 3 configuration 1 interface 0 "Alcor Micro USB Multimedia 
Keyboard" rev 1.10/1.22 addr 12
uhidev7: iclass 3/1
ukbd1 at uhidev7: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev8 at uhub8 port 3 configuration 1 interface 1 "Alcor Micro USB Multimedia 
Keyboard" rev 1.10/1.22 addr 12
uhidev8: iclass 3/0, 3 report ids
uhid24 at uhidev8 reportid 2: input=1, output=0, feature=0
uhid25 at uhidev8 reportid 3: input=2, output=0, feature=0
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev4 detached
uhid23 detached
uhidev5 detached
uhub9 detached
wsmouse2 detached
ums1 detached
uhidev6 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ukbd1 detached
uhidev7 detached
uhid24 detached
uhid25 detached
uhidev8 detached
uhub8 detached
uhub8 at uhub3 port 2 configuration 1 interface 0 "ROCLA KVM PORT SWITCH" rev 
1.10/1.00 addr 8
uhub9 at uhub8 port 1 configuration 1 interface 0 "Apple, Inc. Keyboard Hub" 
rev 2.00/96.15 addr 9
uhub9 detached
uhub8 detached
uhub8 at uhub3 port 2 configuration 1 interface 0 "ROCLA KVM PORT SWITCH" rev 
1.10/1.00 addr 8
uhub9 at uhub8 port 1 configuration 1 interface 0 "Apple, Inc. Keyboard Hub" 
rev 2.00/96.15 addr 9
uhidev4 at uhub9 port 2 configuration 1 interface 0 "Apple Inc. Apple Keyboard" 
rev 2.00/0.74 addr 10
uhidev4: iclass 3/1
ukbd0 at uhidev4: 8 variable keys, 5 key codes, country code 13
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev5 at uhub9 port 2 configuration 1 interface 1 "Apple Inc. Apple Keyboard" 
rev 2.00/0.74 addr 10
uhidev5: iclass 3/0
uhid23 at uhidev5: input=1, output=0, feature=0
uhidev6 at uhub8 port 2 configuration 1 interface 0 "Logitech USB Optical 
Mouse" rev 2.00/72.00 addr 11
uhidev6: iclass 3/1
ums1 at uhidev6: 3 buttons, Z dir
wsmouse2 at ums1 mux 0
uhidev7 at uhub8 port 3 configuration 1 interface 0 "Alcor Micro USB Multimedia 
Keyboard" rev 1.10/1.22 addr 12
uhidev7: iclass 3/1
ukbd1 at uhidev7: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev8 at uhub8 port 3 configuration 1 interface 1 "Alcor Micro USB Multimedia 
Keyboard" rev 1.10/1.22 addr 12
uhidev8: iclass 3/0, 3 report ids
uhid24 at uhidev8 reportid 2: input=1, output=0, feature=0
uhid25 at uhidev8 reportid 3: input=2, output=0, feature=0

Reply via email to