Hi again, I'm sorry, but since the boxes do not (yet) have working networking it is not easy for me to get the text output. I'm attaching a few pictures with the requested output.
https://picpaste.me/images/2019/12/03/cat_hostname.vl3800_hostname.aggr0.jpg https://picpaste.me/images/2019/12/03/ifconfig_vl3800.jpg https://picpaste.me/images/2019/12/03/ifconfig_aggr0.jpg Best regards, Pedro Caetano On Tue, Dec 3, 2019 at 12:35 PM Hrvoje Popovski <hrv...@srce.hr> wrote: > On 3.12.2019. 13:15, Pedro Caetano wrote: > > Hi Hrvoje, thank you for the fast reply, > > > > Unfortunately I have the same behavior. > > The aggr0 works as expected, as I can see the links bonded on the switch. > > I'm able to se the correct vid s, when tcpdump'ing the aggr0 interface. > > > > I'd appreciate any help on this topic. > > > > can you send ifconfig aggr0 and ifconfig vlan3800 ? > > > > > > This configuration is working on -current with em(4) nics. > > > > > > Best regards, > > Pedro Caetano > > > > A terça, 3/12/2019, 12:01, Hrvoje Popovski <hrv...@srce.hr > > <mailto:hrv...@srce.hr>> escreveu: > > > > On 3.12.2019. 12:21, Pedro Caetano wrote: > > > Hi misc@ > > > > > > I'm running openbsd 6.6 with latest patches running on a pair of > > hp dl 360 > > > gen6 servers. > > > > > > I'm attempting to configure an aggr0 device towards a cat 3650. > > > > > > The aggr0 associates successfully with the switch, but I'm unable > > to run > > > vlans on top of it. > > > > > > The configuration on openbsd is the following: > > > #ifconfig aggr0 create > > > #ifconfig aggr0 trunkport bnx0 > > > #ifconfig aggr0 trunkport bnx1 > > > > add this - ifconfig aggr0 up > > if you have hostname.aggr0 add "up" at the end of that file ... > > > > > #ifconfig vlan3800 create > > > #ifconfig vlan3800 vnetid 3800 > > > #ifconfig vlan3800 parent aggr0 > > > #ifconfig vlan3800 10.80.253.10/24 <http://10.80.253.10/24> > > > ifconfig: SIOCAIFADDR: No buffer space available. > > > >
