> On 4 Aug 2020, at 17:04, Marko Cupać <marko.cu...@mimar.rs> wrote:
>
> Hi,
>
> I have recently upgraded (actually installed from scratch and copied
> config files) one of my firewalls from 6.6 to 6.7, and (sys)patched it
> to 017_dix. Everything works great except my npppd setup. It starts
> fine, but upon connecting over pptp I get the following records in log:
>
> Aug 4 15:48:48 nat2 npppd[66557]: pptpd ctrl=0 call=28381 logtype=PPPBind
> ppp=0
> Aug 4 15:48:48 nat2 npppd[66557]: ppp id=0 layer=base logtype=TUNNELSTART
> user="someuser" duration=0sec layer2=SOMECOMPANY layer2from=PU.BL.IC.IP:58242
> auth=MS-CHAP-V2 ip=TU.NN.EL.IP iface=pppx0
> Aug 4 15:48:48 nat2 npppd[66557]: ppp id=0 layer=base failed enable pipex:
> Invalid argument
> Aug 4 15:48:48 nat2 npppd[66557]: pptpd ctrl=0 call=28381 logtype=PPPUnbind
> Aug 4 15:48:48 nat2 npppd[66557]: ppp id=0 layer=base logtype=TUNNELUSAGE
> user="someuser" duration=0sec layer2=SOMECOMPANY layer2from=PU.BL.IC.IP:58242
> auth=MS-CHAP-V2 data_in=290bytes,11packets data_out=239bytes,10packets
> error_in=0 error_out=0 mppe=yes mppe_in=128bits,stateless
> mppe_out=128bits,stateless iface=pppx0
> Aug 4 15:48:48 nat2 npppd[66557]: pptpd ctrl=0 call=28381 logtype=Terminated
> Aug 4 15:48:48 nat2 npppd[66557]: pptpd ctrl=0 logtype=Finished
>
> pipex is enabled in sysctl.conf:
>
> me@myfw:~ $ sysctl net.pipex.enable
> net.pipex.enable=1
>
> Identical npppd.conf works flawlessly on another CARP member which is
> still at 6.6:
>
> # GLOBAL
> set max-session 200
> set user-max-session 1
>
> # TUNNEL
> tunnel SOMECOMPANY protocol pptp {
> listen on PU.BL.IC.IP
> pptp-hostname somehost.example.org
> pptp-vendor-name "openbsd-npppd"
> ingress-filter yes
> mppe required
> mppe-key-length 128
> mppe-key-state stateless
> idle-timeout 1800
In kernel timeout was disabled for pppx(4). Remove please "idle-timeout”.
> }
>
> # IPCP
> ipcp SOMECOMPANY {
> pool-address "PR.IVA.TE.0/24"
> dns-servers SO.ME.IP.ADD
> allow-user-selected-address no
> }
>
> # INTERFACE
> interface pppx0 address PR.IVA.TE.1 ipcp SOMECOMPANY
>
> # AUTHENTICATION
> authentication RADIUS type radius {
> strip-nt-domain yes
> strip-atmark-realm yes
> authentication-server {
> address SO.ME.IP.ADD secret "somepass"
> }
> accounting-server {
> address SO.ME.IP.ADD secret "somepass"
> }
> }
>
> bind tunnel from SOMECOMPANY authenticated by RADIUS to pppx0
>
> Here's dmesg:
>
> OpenBSD 6.7 (GENERIC.MP) #5: Tue Jul 21 13:50:07 MDT 2020
>
> r...@syspatch-67-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 17027289088 (16238MB)
> avail mem = 16498622464 (15734MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x788cf000 (234 entries)
> bios0: vendor HP version "P89" date 10/21/2019
> bios0: HP ProLiant DL360 Gen9
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S5
> acpi0: tables DSDT FACP UEFI MCEJ SSDT HEST BERT ERST EINJ BGRT HPET PMCT
> WDDT APIC MCFG SLIT SRAT SPMI RASF SPCR MSCT BDAT PCCT DMAR SSDT SSDT SSDT
> acpi0: wakeup devices PEX4(S4) BR05(S4) BR03(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU E5-2623 v4 @ 2.60GHz, 2597.31 MHz, 06-4f-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Xeon(R) CPU E5-2623 v4 @ 2.60GHz, 2597.00 MHz, 06-4f-01
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E5-2623 v4 @ 2.60GHz, 2597.00 MHz, 06-4f-01
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E5-2623 v4 @ 2.60GHz, 2597.00 MHz, 06-4f-01
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> cpu4 at mainbus0: apid 1 (application processor)
> cpu4: Intel(R) Xeon(R) CPU E5-2623 v4 @ 2.60GHz, 2597.00 MHz, 06-4f-01
> cpu4:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu4: smt 1, core 0, package 0
> cpu5 at mainbus0: apid 3 (application processor)
> cpu5: Intel(R) Xeon(R) CPU E5-2623 v4 @ 2.60GHz, 2597.00 MHz, 06-4f-01
> cpu5:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu5: smt 1, core 1, package 0
> cpu6 at mainbus0: apid 5 (application processor)
> cpu6: Intel(R) Xeon(R) CPU E5-2623 v4 @ 2.60GHz, 2597.00 MHz, 06-4f-01
> cpu6:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu6: 256KB 64b/line 8-way L2 cache
> cpu6: smt 1, core 2, package 0
> cpu7 at mainbus0: apid 7 (application processor)
> cpu7: Intel(R) Xeon(R) CPU E5-2623 v4 @ 2.60GHz, 2597.00 MHz, 06-4f-01
> cpu7:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,RDSEED,ADX,SMAP,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu7: 256KB 64b/line 8-way L2 cache
> cpu7: smt 1, core 3, package 0
> ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 9 pa 0xfec01000, version 20, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0x80000000, bus 0-255
> acpiprt0 at acpi0: bus 255 (UNC0)
> acpiprt1 at acpi0: bus 0 (PCI0)
> acpiprt2 at acpi0: bus 1 (PEX2)
> acpiprt3 at acpi0: bus 2 (PEX4)
> acpiprt4 at acpi0: bus 3 (BR01)
> acpiprt5 at acpi0: bus 4 (BR05)
> "PNP0C33" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpipci0 at acpi0 UNC0: _OSC failed
> "ACPI0004" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> "ACPI0007" at acpi0 not configured
> acpipci1 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
> "PNP0003" at acpi0 not configured
> acpicmos0 at acpi0
> "IPI0001" at acpi0 not configured
> "ACPI000E" at acpi0 not configured
> "ACPI000D" at acpi0 not configured
> ipmi at mainbus0 not configured
> cpu0: using VERW MDS workaround (except on vmm entry)
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Xeon-D Host" rev 0x01
> ppb0 at pci0 dev 1 function 0 "Intel Xeon-D PCIE" rev 0x01
> pci1 at ppb0 bus 3
> ppb1 at pci0 dev 1 function 1 "Intel Xeon-D PCIE" rev 0x01
> pci2 at ppb1 bus 8
> ppb2 at pci0 dev 2 function 0 "Intel Xeon-D PCIE" rev 0x01
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 2 function 1 "Intel Xeon-D PCIE" rev 0x01
> pci4 at ppb3 bus 9
> ppb4 at pci0 dev 2 function 2 "Intel Xeon-D PCIE" rev 0x01
> pci5 at ppb4 bus 4
> ppb5 at pci0 dev 2 function 3 "Intel Xeon-D PCIE" rev 0x01
> pci6 at ppb5 bus 10
> ppb6 at pci0 dev 3 function 0 "Intel Xeon-D PCIE" rev 0x01
> pci7 at ppb6 bus 6
> ppb7 at pci0 dev 3 function 1 "Intel Xeon-D PCIE" rev 0x01
> pci8 at ppb7 bus 11
> ppb8 at pci0 dev 3 function 2 "Intel Xeon-D PCIE" rev 0x01
> pci9 at ppb8 bus 7
> ppb9 at pci0 dev 3 function 3 "Intel Xeon-D PCIE" rev 0x01
> pci10 at ppb9 bus 12
> "Intel E5 v4 DMA" rev 0x01 at pci0 dev 4 function 0 not configured
> "Intel E5 v4 DMA" rev 0x01 at pci0 dev 4 function 1 not configured
> "Intel E5 v4 DMA" rev 0x01 at pci0 dev 4 function 2 not configured
> "Intel E5 v4 DMA" rev 0x01 at pci0 dev 4 function 3 not configured
> "Intel E5 v4 DMA" rev 0x01 at pci0 dev 4 function 4 not configured
> "Intel E5 v4 DMA" rev 0x01 at pci0 dev 4 function 5 not configured
> "Intel E5 v4 DMA" rev 0x01 at pci0 dev 4 function 6 not configured
> "Intel E5 v4 DMA" rev 0x01 at pci0 dev 4 function 7 not configured
> "Intel Xeon-D Address Map" rev 0x01 at pci0 dev 5 function 0 not configured
> "Intel Xeon-D Hot Plug" rev 0x01 at pci0 dev 5 function 1 not configured
> "Intel Xeon-D RAS" rev 0x01 at pci0 dev 5 function 2 not configured
> "Intel Xeon-D I/O APIC" rev 0x01 at pci0 dev 5 function 4 not configured
> "Intel C610 MS SPSR" rev 0x05 at pci0 dev 17 function 0 not configured
> xhci0 at pci0 dev 20 function 0 "Intel C610 xHCI" rev 0x05: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
> addr 1
> ehci0 at pci0 dev 26 function 0 "Intel C610 USB" rev 0x05: apic 8 int 18
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> ppb10 at pci0 dev 28 function 0 "Intel C610 PCIE" rev 0xd5
> pci11 at ppb10 bus 13
> ppb11 at pci0 dev 28 function 2 "Intel C610 PCIE" rev 0xd5
> pci12 at ppb11 bus 1
> "Hewlett-Packard iLO3 Slave" rev 0x06 at pci12 dev 0 function 0 not configured
> "Matrox MGA G200eH" rev 0x01 at pci12 dev 0 function 1 not configured
> "Hewlett-Packard iLO3 Management" rev 0x06 at pci12 dev 0 function 2 not
> configured
> uhci0 at pci12 dev 0 function 4 "Hewlett-Packard USB" rev 0x03: apic 8 int 19
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 configuration 1 interface 0 "Hewlett-Packard UHCI root hub" rev
> 1.00/1.00 addr 1
> ppb12 at pci0 dev 28 function 4 "Intel C610 PCIE" rev 0xd5
> pci13 at ppb12 bus 2
> bge0 at pci13 dev 0 function 0 "Broadcom BCM5719" rev 0x01, unknown BCM5719
> (0x5719001), APE firmware NCSI 1.5.12.0: msi, address ec:eb:b8:95:29:7c
> brgphy0 at bge0 phy 1: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge1 at pci13 dev 0 function 1 "Broadcom BCM5719" rev 0x01, unknown BCM5719
> (0x5719001), APE firmware NCSI 1.5.12.0: msi, address ec:eb:b8:95:29:7d
> brgphy1 at bge1 phy 2: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge2 at pci13 dev 0 function 2 "Broadcom BCM5719" rev 0x01, unknown BCM5719
> (0x5719001), APE firmware NCSI 1.5.12.0: msi, address ec:eb:b8:95:29:7e
> brgphy2 at bge2 phy 3: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge3 at pci13 dev 0 function 3 "Broadcom BCM5719" rev 0x01, unknown BCM5719
> (0x5719001), APE firmware NCSI 1.5.12.0: msi, address ec:eb:b8:95:29:7f
> brgphy3 at bge3 phy 4: BCM5719C 10/100/1000baseT PHY, rev. 0
> ppb13 at pci0 dev 28 function 6 "Intel C610 PCIE" rev 0xd5
> pci14 at ppb13 bus 14
> ppb14 at pci0 dev 28 function 7 "Intel C610 PCIE" rev 0xd5
> pci15 at ppb14 bus 15
> ehci1 at pci0 dev 29 function 0 "Intel C610 USB" rev 0x05: apic 8 int 18
> usb3 at ehci1: USB revision 2.0
> uhub3 at usb3 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
> addr 1
> pcib0 at pci0 dev 31 function 0 "Intel C610 LPC" rev 0x05
> ahci0 at pci0 dev 31 function 2 "Intel C610 AHCI" rev 0x05: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, MB001000GWFGF, HPG3> naa.5000c500b212c82e
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
> sd1 at scsibus1 targ 1 lun 0: <ATA, MB001000GWFGF, HPG3> naa.5000c500b2126c31
> sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
> ichiic0 at pci0 dev 31 function 3 "Intel C610 SMBus" rev 0x05: apic 8 int 18
> iic0 at ichiic0
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> com1: probed fifo depth: 0 bytes
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> pci16 at mainbus0 bus 255
> "Intel Xeon-D QPI Link" rev 0x01 at pci16 dev 11 function 0 not configured
> "Intel Xeon-D QPI Link" rev 0x01 at pci16 dev 11 function 1 not configured
> "Intel Xeon-D QPI Link" rev 0x01 at pci16 dev 11 function 2 not configured
> "Intel Xeon-D QPI Debug" rev 0x01 at pci16 dev 11 function 3 not configured
> "Intel Xeon-D Cache" rev 0x01 at pci16 dev 12 function 0 not configured
> "Intel Xeon-D Cache" rev 0x01 at pci16 dev 12 function 1 not configured
> "Intel Xeon-D Cache" rev 0x01 at pci16 dev 12 function 2 not configured
> "Intel Xeon-D Cache" rev 0x01 at pci16 dev 12 function 3 not configured
> "Intel Xeon-D Cache" rev 0x01 at pci16 dev 15 function 0 not configured
> "Intel E5 v4 Cache" rev 0x01 at pci16 dev 15 function 1 not configured
> "Intel Xeon-D Cache" rev 0x01 at pci16 dev 15 function 4 not configured
> "Intel Xeon-D Cache" rev 0x01 at pci16 dev 15 function 5 not configured
> "Intel Xeon-D Cache" rev 0x01 at pci16 dev 15 function 6 not configured
> "Intel Xeon-D PCIE" rev 0x01 at pci16 dev 16 function 0 not configured
> "Intel E5 v4 R2PCIe Agent" rev 0x01 at pci16 dev 16 function 1 not configured
> "Intel Xeon-D Ubox" rev 0x01 at pci16 dev 16 function 5 not configured
> "Intel Xeon-D Ubox" rev 0x01 at pci16 dev 16 function 6 not configured
> "Intel Xeon-D Ubox" rev 0x01 at pci16 dev 16 function 7 not configured
> "Intel Xeon-D Home Agent" rev 0x01 at pci16 dev 18 function 0 not configured
> "Intel Xeon-D Home Agent" rev 0x01 at pci16 dev 18 function 1 not configured
> vendor "Intel", unknown product 0x6f70 (class system subclass miscellaneous,
> rev 0x01) at pci16 dev 18 function 2 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 19 function 0 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 19 function 1 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 19 function 2 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 19 function 3 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 19 function 4 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 19 function 5 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 19 function 6 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 19 function 7 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 20 function 0 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 20 function 1 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 20 function 2 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 20 function 3 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 20 function 4 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 20 function 5 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 20 function 6 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 20 function 7 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 21 function 0 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 21 function 1 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 21 function 2 not configured
> "Intel Xeon-D Memory" rev 0x01 at pci16 dev 21 function 3 not configured
> "Intel E5 v4 RAS" rev 0x01 at pci16 dev 22 function 0 not configured
> "Intel E5 v4 DDRIO" rev 0x01 at pci16 dev 22 function 6 not configured
> "Intel E5 v4 DDRIO" rev 0x01 at pci16 dev 22 function 7 not configured
> "Intel E5 v4 Thermal" rev 0x01 at pci16 dev 23 function 0 not configured
> "Intel E5 v4 DDRIO" rev 0x01 at pci16 dev 23 function 4 not configured
> "Intel E5 v4 DDRIO" rev 0x01 at pci16 dev 23 function 5 not configured
> "Intel E5 v4 DDRIO" rev 0x01 at pci16 dev 23 function 6 not configured
> "Intel E5 v4 DDRIO" rev 0x01 at pci16 dev 23 function 7 not configured
> "Intel Xeon-D PCU" rev 0x01 at pci16 dev 30 function 0 not configured
> "Intel Xeon-D PCU" rev 0x01 at pci16 dev 30 function 1 not configured
> "Intel Xeon-D PCU" rev 0x01 at pci16 dev 30 function 2 not configured
> "Intel Xeon-D PCU" rev 0x01 at pci16 dev 30 function 3 not configured
> "Intel Xeon-D PCU" rev 0x01 at pci16 dev 30 function 4 not configured
> "Intel Xeon-D PCU" rev 0x01 at pci16 dev 31 function 0 not configured
> "Intel Xeon-D PCU" rev 0x01 at pci16 dev 31 function 2 not configured
> vmm0 at mainbus0: VMX/EPT
> efifb0 at mainbus0: 1280x1024, 32bpp
> wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> uhub4 at uhub0 port 3 configuration 1 interface 0 "Standard Microsystems
> product 0x2660" rev 2.00/8.01 addr 2
> uhidev0 at uhub0 port 10 configuration 1 interface 0 "NOVATEK USB Keyboard"
> rev 1.10/1.04 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub0 port 10 configuration 1 interface 1 "NOVATEK USB Keyboard"
> rev 1.10/1.04 addr 3
> uhidev1: iclass 3/0, 2 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
> uhub5 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.05 addr 2
> uhub6 at uhub3 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.05 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
> sd2: 953868MB, 512 bytes/sector, 1953523553 sectors
> root on sd2a (6134b362762c60c8.a) swap on sd2b dump on sd2b
>
> --
> Before enlightenment - chop wood, draw water.
> After enlightenment - chop wood, draw water.
>
> Marko Cupać
> https://www.mimar.rs/
>
