Duncan Patton a Campbell wrote:

> doesn't work.  Works fine elsewhere.  Granted this is also
> a ten year old board.
> 
> following is dmesg.  Any ideas are apreciated.  
> 
> Thanks,
> 
> Dhu

According to your dmesg your audio device is

ATI Radeon HD 4200 HD Audio

I am using 

ATI Radeon HD 5470 Audio

and everything works normal. My dmesg is attached. I also have

oko# cat /etc/sysctl.conf
kern.audio.record=1

oko# cat /etc/mixerctl.conf
outputs.master=248,248
outputs.mix8=248,248
outputs.mix2=248,248

oko# ls -l audio*
crw-rw----  1 root  _sndiop   42,   0 Oct 24 19:40 audio0
crw-rw----  1 root  _sndiop   42,   1 Oct 19 00:37 audio1
crw-rw----  1 root  _sndiop   42,   2 Oct 19 00:37 audio2
crw-rw----  1 root  _sndiop   42,   3 Oct 19 00:37 audio3
crw-rw----  1 root  _sndiop   42, 192 Oct 19 00:37 audioctl0
crw-rw----  1 root  _sndiop   42, 193 Oct 19 00:37 audioctl1
crw-rw----  1 root  _sndiop   42, 194 Oct 19 00:37 audioctl2
crw-rw----  1 root  _sndiop   42, 195 Oct 19 00:37 audioctl3



OpenBSD 6.8 (RAMDISK_CD) #94: Sun Oct  4 18:21:11 MDT 2020
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 17158766592 (16363MB)
avail mem = 16634720256 (15864MB)
random: boothowto does not indicate good seed
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (38 entries)
bios0: vendor Award Software International, Inc. version "F8" date 02/11/2010
bios0: Gigabyte Technology Co., Ltd. P55M-UD2
acpi0 at bios0: ACPI 1.0
acpi0: tables DSDT FACP HPET MCFG EUDS TAMG APIC SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.32 MHz, 06-1e-05
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus 3 (PEX4)
acpiprt6 at acpi0: bus 4 (PEX5)
acpiprt7 at acpi0: bus -1 (PEX6)
acpiprt8 at acpi0: bus -1 (PEX7)
acpiprt9 at acpi0: bus 5 (HUB0)
"PNP0C0C" at acpi0 not configured
acpipci0 at acpi0 PCI0
acpicmos0 at acpi0
acpicpu at acpi0 not configured
cpu0: using IvyBridge MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: apic 2 int 16
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 2 int 16, address 
00:15:17:51:d1:ac
em1 at pci1 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 2 int 17, address 
00:15:17:51:d1:ad
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 3400 USB" rev 0x06: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 3400 USB" rev 0x06: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 3400 USB" rev 0x06: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
"Intel 3400 HD Audio" rev 0x06 at pci0 dev 27 function 0 not configured
ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 2 int 16
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI FirePro 2270" rev 0x00
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"ATI Radeon HD 5470 Audio" rev 0x00 at pci2 dev 0 function 1 not configured
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: apic 2 int 16
pci3 at ppb2 bus 3
jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16, AHCI 1.0
scsibus0 at ahci0: 32 targets
jmb1 at pci3 dev 0 function 1 "JMicron JMB363 IDE/SATA" rev 0x02
pciide0 at jmb1: DMA, channel 0 wired to native-PCI, channel 1 wired to 
native-PCI
pciide0: using apic 2 int 17 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ppb3 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: apic 2 int 17
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), 
apic 2 int 17, address 6c:f0:49:7d:e0:00
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 3400 USB" rev 0x06: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 3400 USB" rev 0x06: apic 2 int 18
uhci6 at pci0 dev 29 function 3 "Intel 3400 USB" rev 0x06: apic 2 int 16
ehci1 at pci0 dev 29 function 7 "Intel 3400 USB" rev 0x06: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6
pci5 at ppb4 bus 5
"TI TSB43AB23 FireWire" rev 0x00 at pci5 dev 7 function 0 not configured
"Intel P55 LPC" rev 0x06 at pci0 dev 31 function 0 not configured
ahci1 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: apic 2 int 19, AHCI 
1.3
ahci1: port 0: 3.0Gb/s
ahci1: port 1: 3.0Gb/s
ahci1: port 4: 1.5Gb/s
scsibus1 at ahci1: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST2000NM0008-2F3, SN01> naa.5000c500a20c8afc
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, ST2000NM0008-2F3, SN01> naa.5000c500a20c72e9
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
cd0 at scsibus1 targ 4 lun 0: <HL-DT-ST, DVDRAM GH15F, EG00> removable
"Intel 3400 SMBus" rev 0x06 at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb8 at uhci6: USB revision 1.0
uhub8 at usb8 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Cruzer Fit" rev 
2.00/1.27 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer Fit, 1.27> removable 
serial.07815571750317107221
sd2: 15267MB, 512 bytes/sector, 31266816 sectors
uhidev0 at uhub6 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay1
uhidev1 at uhub6 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev1: iclass 3/1, 8 report ids
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhid at uhidev1 reportid 4 not configured
uhid at uhidev1 reportid 8 not configured
uhidev2 at uhub6 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid at uhidev2 reportid 16 not configured
uhid at uhidev2 reportid 17 not configured
uhid at uhidev2 reportid 32 not configured
uhid at uhidev2 reportid 33 not configured
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd3: 1907726MB, 512 bytes/sector, 3907023473 sectors
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
syncing disks...
OpenBSD 6.8 (GENERIC.MP) #98: Sun Oct  4 18:13:26 MDT 2020
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17158766592 (16363MB)
avail mem = 16623706112 (15853MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (38 entries)
bios0: vendor Award Software International, Inc. version "F8" date 02/11/2010
bios0: Gigabyte Technology Co., Ltd. P55M-UD2
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG EUDS TAMG APIC SSDT
acpi0: wakeup devices PCI0(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) 
PEX5(S5) PEX6(S5) PEX7(S5) HUB0(S5) UAR1(S3) USB0(S3) USB1(S3) USB2(S3) 
USB3(S3) USB4(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xf4000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.31 MHz, 06-1e-05
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus 3 (PEX4)
acpiprt6 at acpi0: bus 4 (PEX5)
acpiprt7 at acpi0: bus -1 (PEX6)
acpiprt8 at acpi0: bus -1 (PEX7)
acpiprt9 at acpi0: bus 5 (HUB0)
acpibtn0 at acpi0: PWRB
acpipci0 at acpi0 PCI0
acpicmos0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
cpu0: using IvyBridge MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: apic 2 int 16
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 2 int 16, address 
00:15:17:51:d1:ac
em1 at pci1 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 2 int 17, address 
00:15:17:51:d1:ad
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 3400 USB" rev 0x06: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 3400 USB" rev 0x06: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 3400 USB" rev 0x06: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: apic 2 int 22
azalia0: codecs: Realtek/0x0887
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 2 int 16
pci2 at ppb1 bus 2
radeondrm0 at pci2 dev 0 function 0 "ATI FirePro 2270" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 16
azalia1 at pci2 dev 0 function 1 "ATI Radeon HD 5470 Audio" rev 0x00: apic 2 
int 17
azalia1: no supported codecs
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: apic 2 int 16
pci3 at ppb2 bus 3
jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16, AHCI 1.0
scsibus1 at ahci0: 32 targets
jmb1 at pci3 dev 0 function 1 "JMicron JMB363 IDE/SATA" rev 0x02
pciide0 at jmb1: DMA, channel 0 wired to native-PCI, channel 1 wired to 
native-PCI
pciide0: using apic 2 int 17 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ppb3 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: apic 2 int 17
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), 
apic 2 int 17, address 6c:f0:49:7d:e0:00
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 3400 USB" rev 0x06: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 3400 USB" rev 0x06: apic 2 int 18
uhci6 at pci0 dev 29 function 3 "Intel 3400 USB" rev 0x06: apic 2 int 16
ehci1 at pci0 dev 29 function 7 "Intel 3400 USB" rev 0x06: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6
pci5 at ppb4 bus 5
"TI TSB43AB23 FireWire" rev 0x00 at pci5 dev 7 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel P55 LPC" rev 0x06
ahci1 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: apic 2 int 19, AHCI 
1.3
ahci1: port 0: 3.0Gb/s
ahci1: port 1: 3.0Gb/s
ahci1: port 4: 1.5Gb/s
scsibus2 at ahci1: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, ST2000NM0008-2F3, SN01> naa.5000c500a20c8afc
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd1 at scsibus2 targ 1 lun 0: <ATA, ST2000NM0008-2F3, SN01> naa.5000c500a20c72e9
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
cd0 at scsibus2 targ 4 lun 0: <HL-DT-ST, DVDRAM GH15F, EG00> removable
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x4e 00=80 03=70 04=70 06=0d 07=01 0c=5d 0d=5d 0e=5d 0f=90 12=ff 
13=ff 1a=40 1b=77 1d=02 20=0f 26=03 28=83 29=12 2a=34 35=7d 3b=28 40=ff 41=20 
42=3e 43=07 44=e5 45=3f 48=7f 49=4f 4a=30 words 00=8000 01=0000 02=0070 03=7070 
04=7000 05=000d 06=0d01 07=0100
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-12800
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb8 at uhci6: USB revision 1.0
uhub8 at usb8 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x290
vmm0 at mainbus0: VMX/EPT
umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Cruzer Fit" rev 
2.00/1.27 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <SanDisk, Cruzer Fit, 1.27> removable 
serial.07815571750317107221
sd2: 15267MB, 512 bytes/sector, 31266816 sectors
uhidev0 at uhub6 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub6 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub6 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd3: 1907726MB, 512 bytes/sector, 3907023473 sectors
root on sd3a (6b2b6733acf1cfed.a) swap on sd3b dump on sd3b
initializing kernel modesetting (CEDAR 0x1002:0x68F2 0x1028:0x0126 0x00).
radeondrm0: 1600x1200, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uid 0 on /usr/local: file system full
uid 0 on /usr/local: file system full
uid 0 on /usr/local: file system full
uid 0 on /usr/local: file system full
uid 0 on /usr/local: file system full
uid 0 on /usr/local: file system full
uid 0 on /usr/local: file system full
uid 0 on /usr/local: file system full
syncing disks... done
rebooting...
OpenBSD 6.8 (GENERIC.MP) #98: Sun Oct  4 18:13:26 MDT 2020
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17158766592 (16363MB)
avail mem = 16623693824 (15853MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (38 entries)
bios0: vendor Award Software International, Inc. version "F8" date 02/11/2010
bios0: Gigabyte Technology Co., Ltd. P55M-UD2
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG EUDS TAMG APIC SSDT
acpi0: wakeup devices PCI0(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) 
PEX5(S5) PEX6(S5) PEX7(S5) HUB0(S5) UAR1(S3) USB0(S3) USB1(S3) USB2(S3) 
USB3(S3) USB4(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xf4000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.33 MHz, 06-1e-05
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus 3 (PEX4)
acpiprt6 at acpi0: bus 4 (PEX5)
acpiprt7 at acpi0: bus -1 (PEX6)
acpiprt8 at acpi0: bus -1 (PEX7)
acpiprt9 at acpi0: bus 5 (HUB0)
acpibtn0 at acpi0: PWRB
acpipci0 at acpi0 PCI0
acpicmos0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
cpu0: using IvyBridge MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: apic 2 int 16
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 2 int 16, address 
00:15:17:51:d1:ac
em1 at pci1 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 2 int 17, address 
00:15:17:51:d1:ad
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 3400 USB" rev 0x06: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 3400 USB" rev 0x06: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 3400 USB" rev 0x06: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: apic 2 int 22
azalia0: codecs: Realtek/0x0887
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 2 int 16
pci2 at ppb1 bus 2
radeondrm0 at pci2 dev 0 function 0 "ATI FirePro 2270" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 16
azalia1 at pci2 dev 0 function 1 "ATI Radeon HD 5470 Audio" rev 0x00: apic 2 
int 17
azalia1: no supported codecs
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: apic 2 int 16
pci3 at ppb2 bus 3
jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16, AHCI 1.0
scsibus1 at ahci0: 32 targets
jmb1 at pci3 dev 0 function 1 "JMicron JMB363 IDE/SATA" rev 0x02
pciide0 at jmb1: DMA, channel 0 wired to native-PCI, channel 1 wired to 
native-PCI
pciide0: using apic 2 int 17 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ppb3 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: apic 2 int 17
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), 
apic 2 int 17, address 6c:f0:49:7d:e0:00
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 3400 USB" rev 0x06: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 3400 USB" rev 0x06: apic 2 int 18
uhci6 at pci0 dev 29 function 3 "Intel 3400 USB" rev 0x06: apic 2 int 16
ehci1 at pci0 dev 29 function 7 "Intel 3400 USB" rev 0x06: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6
pci5 at ppb4 bus 5
"TI TSB43AB23 FireWire" rev 0x00 at pci5 dev 7 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel P55 LPC" rev 0x06
ahci1 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: apic 2 int 19, AHCI 
1.3
ahci1: port 0: 3.0Gb/s
ahci1: port 1: 3.0Gb/s
ahci1: port 4: 1.5Gb/s
scsibus2 at ahci1: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, ST2000NM0008-2F3, SN01> naa.5000c500a20c8afc
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd1 at scsibus2 targ 1 lun 0: <ATA, ST2000NM0008-2F3, SN01> naa.5000c500a20c72e9
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
cd0 at scsibus2 targ 4 lun 0: <HL-DT-ST, DVDRAM GH15F, EG00> removable
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x4e 00=80 03=70 04=70 06=0d 07=01 0c=5d 0d=5d 0e=5d 0f=90 12=ff 
13=ff 1a=40 1b=77 1d=02 20=0f 26=03 28=83 29=12 2a=34 35=7d 3b=28 40=ff 41=20 
42=3e 43=07 44=e5 45=3f 48=7f 49=4f 4a=30 words 00=8000 01=0000 02=0070 03=7070 
04=7000 05=000d 06=0d01 07=0100
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-12800
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb8 at uhci6: USB revision 1.0
uhub8 at usb8 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x290
vmm0 at mainbus0: VMX/EPT
umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Cruzer Fit" rev 
2.00/1.27 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <SanDisk, Cruzer Fit, 1.27> removable 
serial.07815571750317107221
sd2: 15267MB, 512 bytes/sector, 31266816 sectors
uhidev0 at uhub6 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub6 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub6 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd3: 1907726MB, 512 bytes/sector, 3907023473 sectors
root on sd3a (6b2b6733acf1cfed.a) swap on sd3b dump on sd3b
initializing kernel modesetting (CEDAR 0x1002:0x68F2 0x1028:0x0126 0x00).
radeondrm0: 1600x1200, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
syncing disks... done
rebooting...
OpenBSD 6.8 (GENERIC.MP) #98: Sun Oct  4 18:13:26 MDT 2020
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17158766592 (16363MB)
avail mem = 16623693824 (15853MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (38 entries)
bios0: vendor Award Software International, Inc. version "F8" date 02/11/2010
bios0: Gigabyte Technology Co., Ltd. P55M-UD2
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG EUDS TAMG APIC SSDT
acpi0: wakeup devices PCI0(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) 
PEX5(S5) PEX6(S5) PEX7(S5) HUB0(S5) UAR1(S3) USB0(S3) USB1(S3) USB2(S3) 
USB3(S3) USB4(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xf4000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.34 MHz, 06-1e-05
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus 3 (PEX4)
acpiprt6 at acpi0: bus 4 (PEX5)
acpiprt7 at acpi0: bus -1 (PEX6)
acpiprt8 at acpi0: bus -1 (PEX7)
acpiprt9 at acpi0: bus 5 (HUB0)
acpibtn0 at acpi0: PWRB
acpipci0 at acpi0 PCI0
acpicmos0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
cpu0: using IvyBridge MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: apic 2 int 16
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 2 int 16, address 
00:15:17:51:d1:ac
em1 at pci1 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 2 int 17, address 
00:15:17:51:d1:ad
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 3400 USB" rev 0x06: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 3400 USB" rev 0x06: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 3400 USB" rev 0x06: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: apic 2 int 22
azalia0: codecs: Realtek/0x0887
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 2 int 16
pci2 at ppb1 bus 2
radeondrm0 at pci2 dev 0 function 0 "ATI FirePro 2270" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 16
azalia1 at pci2 dev 0 function 1 "ATI Radeon HD 5470 Audio" rev 0x00: apic 2 
int 17
azalia1: no supported codecs
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: apic 2 int 16
pci3 at ppb2 bus 3
jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16, AHCI 1.0
scsibus1 at ahci0: 32 targets
jmb1 at pci3 dev 0 function 1 "JMicron JMB363 IDE/SATA" rev 0x02
pciide0 at jmb1: DMA, channel 0 wired to native-PCI, channel 1 wired to 
native-PCI
pciide0: using apic 2 int 17 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ppb3 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: apic 2 int 17
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), 
apic 2 int 17, address 6c:f0:49:7d:e0:00
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 3400 USB" rev 0x06: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 3400 USB" rev 0x06: apic 2 int 18
uhci6 at pci0 dev 29 function 3 "Intel 3400 USB" rev 0x06: apic 2 int 16
ehci1 at pci0 dev 29 function 7 "Intel 3400 USB" rev 0x06: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6
pci5 at ppb4 bus 5
"TI TSB43AB23 FireWire" rev 0x00 at pci5 dev 7 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel P55 LPC" rev 0x06
ahci1 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: apic 2 int 19, AHCI 
1.3
ahci1: port 0: 3.0Gb/s
ahci1: port 1: 3.0Gb/s
ahci1: port 4: 1.5Gb/s
scsibus2 at ahci1: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, ST2000NM0008-2F3, SN01> naa.5000c500a20c8afc
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd1 at scsibus2 targ 1 lun 0: <ATA, ST2000NM0008-2F3, SN01> naa.5000c500a20c72e9
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
cd0 at scsibus2 targ 4 lun 0: <HL-DT-ST, DVDRAM GH15F, EG00> removable
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x4e 00=80 03=70 04=70 06=0d 07=01 0c=5d 0d=5d 0e=5d 0f=90 12=ff 
13=ff 1a=40 1b=77 1d=02 20=0f 26=03 28=83 29=12 2a=34 35=7d 3b=28 40=ff 41=20 
42=3e 43=07 44=e5 45=3f 48=7f 49=4f 4a=30 words 00=8000 01=0000 02=0070 03=7070 
04=7000 05=000d 06=0d01 07=0100
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-12800
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb8 at uhci6: USB revision 1.0
uhub8 at usb8 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x290
vmm0 at mainbus0: VMX/EPT
umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Cruzer Fit" rev 
2.00/1.27 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <SanDisk, Cruzer Fit, 1.27> removable 
serial.07815571750317107221
sd2: 15267MB, 512 bytes/sector, 31266816 sectors
uhidev0 at uhub6 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub6 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub6 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd3: 1907726MB, 512 bytes/sector, 3907023473 sectors
root on sd3a (6b2b6733acf1cfed.a) swap on sd3b dump on sd3b
initializing kernel modesetting (CEDAR 0x1002:0x68F2 0x1028:0x0126 0x00).
radeondrm0: 1600x1200, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
syncing disks... done
r
OpenBSD 6.8 (GENERIC.MP) #98: Sun Oct  4 18:13:26 MDT 2020
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17158766592 (16363MB)
avail mem = 16623693824 (15853MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (38 entries)
bios0: vendor Award Software International, Inc. version "F8" date 02/11/2010
bios0: Gigabyte Technology Co., Ltd. P55M-UD2
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG EUDS TAMG APIC SSDT
acpi0: wakeup devices PCI0(S5) PEX0(S5) PEX1(S5) PEX2(S5) PEX3(S5) PEX4(S5) 
PEX5(S5) PEX6(S5) PEX7(S5) HUB0(S5) UAR1(S3) USB0(S3) USB1(S3) USB2(S3) 
USB3(S3) USB4(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xf4000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.35 MHz, 06-1e-05
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, 1199.16 MHz, 06-1e-05
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PEX0)
acpiprt2 at acpi0: bus -1 (PEX1)
acpiprt3 at acpi0: bus -1 (PEX2)
acpiprt4 at acpi0: bus -1 (PEX3)
acpiprt5 at acpi0: bus 3 (PEX4)
acpiprt6 at acpi0: bus 4 (PEX5)
acpiprt7 at acpi0: bus -1 (PEX6)
acpiprt8 at acpi0: bus -1 (PEX7)
acpiprt9 at acpi0: bus 5 (HUB0)
acpibtn0 at acpi0: PWRB
acpipci0 at acpi0 PCI0
acpicmos0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
cpu0: using IvyBridge MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core DMI" rev 0x11
ppb0 at pci0 dev 3 function 0 "Intel Core PCIE" rev 0x11: apic 2 int 16
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 2 int 16, address 
00:15:17:51:d1:ac
em1 at pci1 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 2 int 17, address 
00:15:17:51:d1:ad
"Intel Core Management" rev 0x11 at pci0 dev 8 function 0 not configured
"Intel Core Scratch" rev 0x11 at pci0 dev 8 function 1 not configured
"Intel Core Control" rev 0x11 at pci0 dev 8 function 2 not configured
"Intel Core Misc" rev 0x11 at pci0 dev 8 function 3 not configured
"Intel Core QPI Link" rev 0x11 at pci0 dev 16 function 0 not configured
"Intel Core QPI Routing" rev 0x11 at pci0 dev 16 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 3400 USB" rev 0x06: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 3400 USB" rev 0x06: apic 2 int 18
ehci0 at pci0 dev 26 function 7 "Intel 3400 USB" rev 0x06: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: apic 2 int 22
azalia0: codecs: Realtek/0x0887
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: apic 2 int 16
pci2 at ppb1 bus 2
radeondrm0 at pci2 dev 0 function 0 "ATI FirePro 2270" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 16
azalia1 at pci2 dev 0 function 1 "ATI Radeon HD 5470 Audio" rev 0x00: apic 2 
int 17
azalia1: no supported codecs
ppb2 at pci0 dev 28 function 4 "Intel 3400 PCIE" rev 0x06: apic 2 int 16
pci3 at ppb2 bus 3
jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16, AHCI 1.0
scsibus1 at ahci0: 32 targets
jmb1 at pci3 dev 0 function 1 "JMicron JMB363 IDE/SATA" rev 0x02
pciide0 at jmb1: DMA, channel 0 wired to native-PCI, channel 1 wired to 
native-PCI
pciide0: using apic 2 int 17 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ppb3 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06: apic 2 int 17
pci4 at ppb3 bus 4
re0 at pci4 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), 
apic 2 int 17, address 6c:f0:49:7d:e0:00
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
uhci3 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 3400 USB" rev 0x06: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 3400 USB" rev 0x06: apic 2 int 18
uhci6 at pci0 dev 29 function 3 "Intel 3400 USB" rev 0x06: apic 2 int 16
ehci1 at pci0 dev 29 function 7 "Intel 3400 USB" rev 0x06: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 
addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6
pci5 at ppb4 bus 5
"TI TSB43AB23 FireWire" rev 0x00 at pci5 dev 7 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel P55 LPC" rev 0x06
ahci1 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x06: apic 2 int 19, AHCI 
1.3
ahci1: port 0: 3.0Gb/s
ahci1: port 1: 3.0Gb/s
ahci1: port 4: 1.5Gb/s
scsibus2 at ahci1: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, ST2000NM0008-2F3, SN01> naa.5000c500a20c8afc
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd1 at scsibus2 targ 1 lun 0: <ATA, ST2000NM0008-2F3, SN01> naa.5000c500a20c72e9
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
cd0 at scsibus2 targ 4 lun 0: <HL-DT-ST, DVDRAM GH15F, EG00> removable
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 2 int 18
iic0 at ichiic0
iic0: addr 0x4e 00=80 03=70 04=70 06=0d 07=01 0c=5d 0d=5d 0e=5d 0f=90 12=ff 
13=ff 1a=40 1b=77 1d=02 20=0f 26=03 28=83 29=12 2a=34 35=7d 3b=28 40=ff 41=20 
42=3e 43=07 44=e5 45=3f 48=7f 49=4f 4a=30 words 00=8000 01=0000 02=0070 03=7070 
04=7000 05=000d 06=0d01 07=0100
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800
spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-12800
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
usb8 at uhci6: USB revision 1.0
uhub8 at usb8 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 
addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8720F rev 8, EC port 0x290
vmm0 at mainbus0: VMX/EPT
umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Cruzer Fit" rev 
2.00/1.27 addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <SanDisk, Cruzer Fit, 1.27> removable 
serial.07815571750317107221
sd2: 15267MB, 512 bytes/sector, 31266816 sectors
uhidev0 at uhub6 port 2 configuration 1 interface 0 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub6 port 2 configuration 1 interface 1 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub6 port 2 configuration 1 interface 2 "Logitech USB Receiver" rev 
2.00/12.03 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd3: 1907726MB, 512 bytes/sector, 3907023473 sectors
root on sd3a (6b2b6733acf1cfed.a) swap on sd3b dump on sd3b
initializing kernel modesetting (CEDAR 0x1002:0x68F2 0x1028:0x0126 0x00).
radeondrm0: 1600x1200, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ugen0 at uhub0 port 3 "EPSON EPSON Scanner" rev 2.00/1.10 addr 3
ugen0 detached
coredump of chrome(75424), write failed: errno 14
coredump of chrome(97272), write failed: errno 14
coredump of chrome(8445), write failed: errno 14
coredump of chrome(85377), write failed: errno 14
coredump of chrome(841), write failed: errno 14
coredump of chrome(99447), write failed: errno 14




Reply via email to