Hello,

I'm struggling to get the internal microphone working on my Thinkpad
X1 Carbon 7th Gen.

I can record from an external USB microphone on OpenBSD. It is only the
internal microphone I'm struggling with.

To rule out a hardware fault, I booted windows from a USB drive and the
microphone works fine in this OS. While being there, I also updated the 
bios and thunderbolt firmware to the latest version.

Is anyone here that got it working on this machine?

dmesg:
azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11: msi
azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
audio0 at azalia0

$ sysctl kern.audio.record
kern.audio.record=1

$ mixerctl -v
inputs.dac-2:3=174,174
inputs.dac-0:1=174,174
record.adc-0:1_mute=off  [ off on ]
record.adc-0:1=124,124
record.adc-2:3_mute=off  [ off on ]
record.adc-2:3=124,124
outputs.spkr_source=dac-2:3  [ dac-2:3 ]
outputs.spkr_mute=off  [ off on ]
outputs.spkr_eapd=on  [ off on ]
outputs.spkr2_source=dac-0:1  [ dac-2:3 dac-0:1 ]
outputs.spkr2_mute=off  [ off on ]
outputs.spkr2_boost=off  [ off on ]
inputs.mic=85,85
outputs.mic_dir=input-vr80  [ none input input-vr0 input-vr50 input-vr80 
input-vr100 ]
outputs.hp_source=dac-0:1  [ dac-2:3 dac-0:1 ]
outputs.hp_mute=off  [ off on ]
outputs.hp_boost=off  [ off on ]
outputs.hp_eapd=on  [ off on ]
record.adc-2:3_source=mic  { mic }
record.adc-0:1_source=mic  { mic }
outputs.mic_sense=unplugged  [ unplugged plugged ]
outputs.hp_sense=unplugged  [ unplugged plugged ]
outputs.spkr_muters=hp  { hp }
outputs.master=255,255
outputs.master.mute=off  [ off on ]
outputs.master.slaves=dac-2:3,dac-0:1,spkr,spkr2,hp  { dac-2:3 dac-0:1 spkr 
spkr2 hp }
record.volume=124,124
record.volume.mute=off  [ off on ]
record.volume.slaves=adc-0:1,adc-2:3  { adc-0:1 adc-2:3 mic }
record.enable=sysctl  [ off on sysctl ]

I also cranked inputs.mic and record.volume up to 255,255 - no 
difference.

$ sndiod -ddd -f rsnd/0 -m play,rec # while aucat -o test.wav
snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
helper(helper|ini): created
worker(worker|ini): created
listen(/tmp/sndio/sock0|ini): created
sock(sock|ini): created
helper: recv: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
helper: recv: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
sock,rmsg,widl: AUTH message
sock,rmsg,widl: HELLO message
sock,rmsg,widl: hello from <aucat>, mode = 2, ver 7
snd0 pst=cfg: device requested
worker: send: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 6
snd0 pst=cfg: using rsnd/0
worker: send: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 7
sio(dev|ini): created
sioctl(mix|ini): created
snd0 pst=cfg: adding output0.level=255 at 25
snd0 pst=cfg: adding output1.level=255 at 26
snd0 pst=cfg: adding output0.mute=0 at 57
snd0 pst=cfg: adding output1.mute=0 at 58
snd0 pst=cfg: adding input0.level=124 at 89
snd0 pst=cfg: adding input1.level=124 at 90
snd0 pst=cfg: adding input0.mute=0 at 121
snd0 pst=cfg: adding input1.mute=0 at 122
snd0 pst=cfg: 48000Hz, s16le, play 0:1, rec 0:1, 16 blocks of 480 frames
snd0 pst=cfg: adding app/aucat0.level=127 at 0
aucat0 vol=127,pst=ini: using snd0 pst=ini.default, mode = 2
aucat0 vol=127,pst=ini,rmsg,widl: SETPAR message
aucat0 vol=127,pst=ini,rmsg,widl: recording channels 0:1 ->0:1
aucat0 vol=127,pst=ini,rmsg,widl: 48000Hz sample rate, 480 frame blocks
aucat0 vol=127,pst=ini,rmsg,widl: 9600 frame buffer
aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
aucat0 vol=127,pst=ini,rmsg,widl: START message
aucat0 vol=127,pst=ini: recording s16le <- s16le
cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
aucat0 vol=127,pst=ini: allocated 9600/17280 fr buffers
snd0 pst=ini: device started
snd0 pst=run: started
aucat0 vol=127,pst=run: attached at -7680, delta = 0
aucat0 vol=127,pst=run: 48000Hz, s16le, rec 0:1, 20 blocks of 480 frames
aucat0 vol=127,pst=run,rmsg,widl: building SETVOL message, vol = 127
aucat0 vol=127,pst=run: prime = 16
aucat0 vol=127,pst=run: prime = 15
aucat0 vol=127,pst=run: prime = 14
aucat0 vol=127,pst=run: prime = 13
aucat0 vol=127,pst=run: prime = 12
aucat0 vol=127,pst=run: prime = 11
aucat0 vol=127,pst=run: prime = 10
aucat0 vol=127,pst=run: prime = 9
aucat0 vol=127,pst=run: prime = 8
aucat0 vol=127,pst=run: prime = 7
aucat0 vol=127,pst=run: prime = 6
aucat0 vol=127,pst=run: prime = 5
aucat0 vol=127,pst=run: prime = 4
aucat0 vol=127,pst=run: prime = 3
aucat0 vol=127,pst=run: prime = 2
aucat0 vol=127,pst=run: prime = 1
aucat0 vol=127,pst=run,rmsg,widl: STOP message
aucat0 vol=127,pst=run: stopping
aucat0 vol=127,pst=run: detaching
aucat0 vol=127,pst=ini,rmsg,widl: stopped
aucat0 vol=127,pst=ini,rmsg,widl: building STOP message
aucat0 vol=127,pst=ini,rmsg,widl: BYE message
aucat0 vol=127,pst=ini,rmsg,widl: closing
snd0 pst=run: device released
sock(sock|zom): destroyed
snd0 pst=run: device stopped
snd0 pst=run: stopped, load avg = 11731 / 3829570
snd0 pst=cfg: software master level control enabled
snd0 pst=cfg: adding output.level=127 at 8
snd0 pst=cfg: closed
sio(dev|zom): destroyed
sioctl(mix|zom): destroyed
snd0 pst=cfg: closing

The resulting file contains silence (some white noise at 300% volume)

Any idea what I'm missing? 

Thanks and best regards,
Stefan

-- 
Stefan Hagen | (gopher|https)://codevoid.de/0/gpg
CBD3 C468 64B4 6517 E8FB B90F B6BC 2EC5 52BE 43BA

Aaaand the obligatory full dmesg:
=================================

OpenBSD 6.8-current (GENERIC.MP) #201: Mon Nov 30 00:44:21 MST 2020
    dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16959836160 (16174MB)
avail mem = 16430538752 (15669MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.1 @ 0x77d49000 (64 entries)
bios0: vendor LENOVO version "N2HET55P (1.38 )" date 08/24/2020
bios0: LENOVO 20QD003MGE
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT UEFI SSDT HPET APIC MCFG ECDT SSDT 
SSDT SSDT BOOT SLIC SSDT LPIT WSMT SSDT DBGP DBG2 MSDM BATB DMAR NHLT FPDT UEFI
acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4) PXSX(S4) 
RP02(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) 
PXSX(S4) RP07(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 17100.43 MHz, 06-8e-0c
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 4090.49 MHz, 06-8e-0c
cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 4090.48 MHz, 06-8e-0c
cpu2: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 4090.59 MHz, 06-8e-0c
cpu3: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-127
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus 3 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus 5 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpithinkpad0 at acpi0: version 2.0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "5B10W13930" serial  2150 type LiP oem "LGC"
"PNP0C60" at acpi0 not configured
"LEN0111" at acpi0 not configured
"LEN0100" at acpi0 not configured
"INT3403" at acpi0 not configured
pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000 
0xfd6a0000/0x10000 irq 14, 320 pins
"ACPI000E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT3400" at acpi0 not configured
"USBC000" at acpi0 not configured
acpipwrres0 at acpi0: PUBS, resource for XHC_
acpipwrres1 at acpi0: BTPR, resource for HS10
acpipwrres2 at acpi0: USBC, resource for XDCI
acpipwrres3 at acpi0: PXP_, resource for RP01, PXSX
acpipwrres4 at acpi0: PXP_, resource for RP13
acpipwrres5 at acpi0: V0PR
acpipwrres6 at acpi0: V1PR
acpipwrres7 at acpi0: V2PR
acpipwrres8 at acpi0: WRST
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), 
C1(1000@1 mwait.1)
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), 
C1(1000@1 mwait.1)
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), 
C1(1000@1 mwait.1)
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), 
C1(1000@1 mwait.1)
acpitz0 at acpi0: critical temperature is 128 degC
acpipwrres9 at acpi0: PIN_
acpipwrres10 at acpi0: PINP
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x0c
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 620" rev 0x02
drm0 at inteldrm0
inteldrm0: msi, COFFEELAKE, gen 9
"Intel Core 6G Thermal" rev 0x0c at pci0 dev 4 function 0 not configured
"Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
pchtemp0 at pci0 dev 18 function 0 "Intel 300 Series Thermal" rev 0x11
xhci0 at pci0 dev 20 function 0 "Intel 300 Series xHCI" rev 0x11: msi, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
addr 1
"Intel 300 Series Shared SRAM" rev 0x11 at pci0 dev 20 function 2 not configured
iwm0 at pci0 dev 20 function 3 "Intel Dual Band Wireless AC 9560" rev 0x11, msix
"Intel 300 Series MEI" rev 0x11 at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 300 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 2
vendor "Intel", unknown product 0x7360 (class wireless unknown subclass 0x40, 
rev 0x01) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 29 function 0 "Intel 300 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 3
nvme0 at pci2 dev 0 function 0 "SanDisk WD Black NVMe" rev 0x00: msix, NVMe 1.3
nvme0: WDC PC SN730 SDBQNTY-1T00-1001, firmware 11130101, serial 1951E5485614
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, WDC PC SN730 SDB, 1113>
sd0: 976762MB, 512 bytes/sector, 2000409264 sectors
ppb2 at pci0 dev 29 function 4 "Intel 300 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 5
ppb3 at pci3 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci5 at ppb4 bus 7
"Intel JHL6540 Thunderbolt" rev 0x02 at pci5 dev 0 function 0 not configured
ppb5 at pci4 dev 1 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci6 at ppb5 bus 8
ppb6 at pci4 dev 2 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci7 at ppb6 bus 45
xhci1 at pci7 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi, xHCI 
1.10
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 
addr 1
ppb7 at pci4 dev 4 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci8 at ppb7 bus 46
pcib0 at pci0 dev 31 function 0 "Intel 300 Series LPC" rev 0x11
azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11: msi
azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 300 Series SMBus" rev 0x11: apic 2 int 
16
iic0 at ichiic0
ichiic0: abort failed, status 0x41<BUSY,INUSE>
"Intel 300 Series SPI" rev 0x11 at pci0 dev 31 function 5 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x11: msi, address 
f8:75:a4:c8:62:06
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Yubico YubiKey 
OTP+FIDO+CCID" rev 2.00/5.26 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Yubico YubiKey 
OTP+FIDO+CCID" rev 2.00/5.26 addr 2
uhidev1: iclass 3/0
fido0 at uhidev1: input=64, output=64, feature=0
ugen0 at uhub0 port 3 configuration 1 "Yubico YubiKey OTP+FIDO+CCID" rev 
2.00/5.26 addr 2
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Azurewave Integrated 
Camera" rev 2.01/69.05 addr 3
video0 at uvideo0
uvideo1 at uhub0 port 8 configuration 1 interface 2 "Azurewave Integrated 
Camera" rev 2.01/69.05 addr 3
video1 at uvideo1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 976761MB, 512 bytes/sector, 2000407649 sectors
root on sd1a (69b037e186d738a3.a) swap on sd1b dump on sd1b
inteldrm0: 3840x2160, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x310, fw ver 34.3125811985.0, address f8:e4:e3:30:0a:07

Reply via email to