Check sysctl(8) - kern.audio.record (turned off by default)
On Fri, 4 Dec 2020 at 1:41 PM Tom Smyth <tom.sm...@wirelessconnect.eu>
wrote:
> Hello Stefan,
>
> have you checked the Bios is it disabled (for Privacy ) / (security)
>
>
>
> On Fri, 4 Dec 2020 at 09:20, Stefan Hagen <sh+open...@codevoid.de> wrote:
>
> > Hello,
> >
> > I'm struggling to get the internal microphone working on my Thinkpad
> > X1 Carbon 7th Gen.
> >
> > I can record from an external USB microphone on OpenBSD. It is only the
> > internal microphone I'm struggling with.
> >
> > To rule out a hardware fault, I booted windows from a USB drive and the
> > microphone works fine in this OS. While being there, I also updated the
> > bios and thunderbolt firmware to the latest version.
> >
> > Is anyone here that got it working on this machine?
> >
> > dmesg:
> > azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11:
> msi
> > azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
> > audio0 at azalia0
> >
> > $ sysctl kern.audio.record
> > kern.audio.record=1
> >
> > $ mixerctl -v
> > inputs.dac-2:3=174,174
> > inputs.dac-0:1=174,174
> > record.adc-0:1_mute=off [ off on ]
> > record.adc-0:1=124,124
> > record.adc-2:3_mute=off [ off on ]
> > record.adc-2:3=124,124
> > outputs.spkr_source=dac-2:3 [ dac-2:3 ]
> > outputs.spkr_mute=off [ off on ]
> > outputs.spkr_eapd=on [ off on ]
> > outputs.spkr2_source=dac-0:1 [ dac-2:3 dac-0:1 ]
> > outputs.spkr2_mute=off [ off on ]
> > outputs.spkr2_boost=off [ off on ]
> > inputs.mic=85,85
> > outputs.mic_dir=input-vr80 [ none input input-vr0 input-vr50 input-vr80
> > input-vr100 ]
> > outputs.hp_source=dac-0:1 [ dac-2:3 dac-0:1 ]
> > outputs.hp_mute=off [ off on ]
> > outputs.hp_boost=off [ off on ]
> > outputs.hp_eapd=on [ off on ]
> > record.adc-2:3_source=mic { mic }
> > record.adc-0:1_source=mic { mic }
> > outputs.mic_sense=unplugged [ unplugged plugged ]
> > outputs.hp_sense=unplugged [ unplugged plugged ]
> > outputs.spkr_muters=hp { hp }
> > outputs.master=255,255
> > outputs.master.mute=off [ off on ]
> > outputs.master.slaves=dac-2:3,dac-0:1,spkr,spkr2,hp { dac-2:3 dac-0:1
> > spkr spkr2 hp }
> > record.volume=124,124
> > record.volume.mute=off [ off on ]
> > record.volume.slaves=adc-0:1,adc-2:3 { adc-0:1 adc-2:3 mic }
> > record.enable=sysctl [ off on sysctl ]
> >
> > I also cranked inputs.mic and record.volume up to 255,255 - no
> > difference.
> >
> > $ sndiod -ddd -f rsnd/0 -m play,rec # while aucat -o test.wav
> > snd0 pst=cfg.default: rec=0:1 play=0:1 vol=23170 dup
> > helper(helper|ini): created
> > worker(worker|ini): created
> > listen(/tmp/sndio/sock0|ini): created
> > sock(sock|ini): created
> > helper: recv: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
> > helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
> > helper: recv: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
> > helper: send: cmd = 3, num = 0, idx = 0, mode = 0, fd = 3
> > sock,rmsg,widl: AUTH message
> > sock,rmsg,widl: HELLO message
> > sock,rmsg,widl: hello from <aucat>, mode = 2, ver 7
> > snd0 pst=cfg: device requested
> > worker: send: cmd = 0, num = 0, idx = 0, mode = 3, fd = -1
> > worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 6
> > snd0 pst=cfg: using rsnd/0
> > worker: send: cmd = 2, num = 0, idx = 0, mode = 768, fd = -1
> > worker: recv: cmd = 3, num = 0, idx = 0, mode = 0, fd = 7
> > sio(dev|ini): created
> > sioctl(mix|ini): created
> > snd0 pst=cfg: adding output0.level=255 at 25
> > snd0 pst=cfg: adding output1.level=255 at 26
> > snd0 pst=cfg: adding output0.mute=0 at 57
> > snd0 pst=cfg: adding output1.mute=0 at 58
> > snd0 pst=cfg: adding input0.level=124 at 89
> > snd0 pst=cfg: adding input1.level=124 at 90
> > snd0 pst=cfg: adding input0.mute=0 at 121
> > snd0 pst=cfg: adding input1.mute=0 at 122
> > snd0 pst=cfg: 48000Hz, s16le, play 0:1, rec 0:1, 16 blocks of 480 frames
> > snd0 pst=cfg: adding app/aucat0.level=127 at 0
> > aucat0 vol=127,pst=ini: using snd0 pst=ini.default, mode = 2
> > aucat0 vol=127,pst=ini,rmsg,widl: SETPAR message
> > aucat0 vol=127,pst=ini,rmsg,widl: recording channels 0:1 ->0:1
> > aucat0 vol=127,pst=ini,rmsg,widl: 48000Hz sample rate, 480 frame blocks
> > aucat0 vol=127,pst=ini,rmsg,widl: 9600 frame buffer
> > aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
> > aucat0 vol=127,pst=ini,rmsg,widl: GETPAR message
> > aucat0 vol=127,pst=ini,rmsg,widl: START message
> > aucat0 vol=127,pst=ini: recording s16le <- s16le
> > cmap: nch = 2, ostart = 0, onext = 0, istart = 0, inext = 0
> > aucat0 vol=127,pst=ini: allocated 9600/17280 fr buffers
> > snd0 pst=ini: device started
> > snd0 pst=run: started
> > aucat0 vol=127,pst=run: attached at -7680, delta = 0
> > aucat0 vol=127,pst=run: 48000Hz, s16le, rec 0:1, 20 blocks of 480 frames
> > aucat0 vol=127,pst=run,rmsg,widl: building SETVOL message, vol = 127
> > aucat0 vol=127,pst=run: prime = 16
> > aucat0 vol=127,pst=run: prime = 15
> > aucat0 vol=127,pst=run: prime = 14
> > aucat0 vol=127,pst=run: prime = 13
> > aucat0 vol=127,pst=run: prime = 12
> > aucat0 vol=127,pst=run: prime = 11
> > aucat0 vol=127,pst=run: prime = 10
> > aucat0 vol=127,pst=run: prime = 9
> > aucat0 vol=127,pst=run: prime = 8
> > aucat0 vol=127,pst=run: prime = 7
> > aucat0 vol=127,pst=run: prime = 6
> > aucat0 vol=127,pst=run: prime = 5
> > aucat0 vol=127,pst=run: prime = 4
> > aucat0 vol=127,pst=run: prime = 3
> > aucat0 vol=127,pst=run: prime = 2
> > aucat0 vol=127,pst=run: prime = 1
> > aucat0 vol=127,pst=run,rmsg,widl: STOP message
> > aucat0 vol=127,pst=run: stopping
> > aucat0 vol=127,pst=run: detaching
> > aucat0 vol=127,pst=ini,rmsg,widl: stopped
> > aucat0 vol=127,pst=ini,rmsg,widl: building STOP message
> > aucat0 vol=127,pst=ini,rmsg,widl: BYE message
> > aucat0 vol=127,pst=ini,rmsg,widl: closing
> > snd0 pst=run: device released
> > sock(sock|zom): destroyed
> > snd0 pst=run: device stopped
> > snd0 pst=run: stopped, load avg = 11731 / 3829570
> > snd0 pst=cfg: software master level control enabled
> > snd0 pst=cfg: adding output.level=127 at 8
> > snd0 pst=cfg: closed
> > sio(dev|zom): destroyed
> > sioctl(mix|zom): destroyed
> > snd0 pst=cfg: closing
> >
> > The resulting file contains silence (some white noise at 300% volume)
> >
> > Any idea what I'm missing?
> >
> > Thanks and best regards,
> > Stefan
> >
> > --
> > Stefan Hagen | (gopher|https)://codevoid.de/0/gpg
> > CBD3 C468 64B4 6517 E8FB B90F B6BC 2EC5 52BE 43BA
> >
> > Aaaand the obligatory full dmesg:
> > =================================
> >
> > OpenBSD 6.8-current (GENERIC.MP) #201: Mon Nov 30 00:44:21 MST 2020
> > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 16959836160 (16174MB)
> > avail mem = 16430538752 (15669MB)
> > random: good seed from bootblocks
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 3.1 @ 0x77d49000 (64 entries)
> > bios0: vendor LENOVO version "N2HET55P (1.38 )" date 08/24/2020
> > bios0: LENOVO 20QD003MGE
> > acpi0 at bios0: ACPI 6.1
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT UEFI SSDT HPET APIC MCFG ECDT
> > SSDT SSDT SSDT BOOT SLIC SSDT LPIT WSMT SSDT DBGP DBG2 MSDM BATB DMAR
> NHLT
> > FPDT UEFI
> > acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4)
> > PXSX(S4) RP02(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4)
> > RP06(S4) PXSX(S4) RP07(S4) [...]
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpihpet0 at acpi0: 23999999 Hz
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 17100.43 MHz, 06-8e-0c
> > cpu0:
> >
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> > cpu0: 256KB 64b/line 8-way L2 cache
> > cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 24MHz
> > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> > cpu1 at mainbus0: apid 2 (application processor)
> > cpu1: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 4090.49 MHz, 06-8e-0c
> > cpu1:
> >
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> > cpu1: 256KB 64b/line 8-way L2 cache
> > cpu1: smt 0, core 1, package 0
> > cpu2 at mainbus0: apid 4 (application processor)
> > cpu2: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 4090.48 MHz, 06-8e-0c
> > cpu2:
> >
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> > cpu2: 256KB 64b/line 8-way L2 cache
> > cpu2: smt 0, core 2, package 0
> > cpu3 at mainbus0: apid 6 (application processor)
> > cpu3: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz, 4090.59 MHz, 06-8e-0c
> > cpu3:
> >
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> > cpu3: 256KB 64b/line 8-way L2 cache
> > cpu3: smt 0, core 3, package 0
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> > acpimcfg0 at acpi0
> > acpimcfg0: addr 0xf0000000, bus 0-127
> > acpiec0 at acpi0
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 2 (RP01)
> > acpiprt2 at acpi0: bus -1 (RP02)
> > acpiprt3 at acpi0: bus -1 (RP03)
> > acpiprt4 at acpi0: bus -1 (RP04)
> > acpiprt5 at acpi0: bus -1 (RP05)
> > acpiprt6 at acpi0: bus -1 (RP06)
> > acpiprt7 at acpi0: bus -1 (RP07)
> > acpiprt8 at acpi0: bus -1 (RP08)
> > acpiprt9 at acpi0: bus 3 (RP09)
> > acpiprt10 at acpi0: bus -1 (RP10)
> > acpiprt11 at acpi0: bus -1 (RP11)
> > acpiprt12 at acpi0: bus -1 (RP12)
> > acpiprt13 at acpi0: bus 5 (RP13)
> > acpiprt14 at acpi0: bus -1 (RP14)
> > acpiprt15 at acpi0: bus -1 (RP15)
> > acpiprt16 at acpi0: bus -1 (RP16)
> > acpiprt17 at acpi0: bus -1 (RP17)
> > acpiprt18 at acpi0: bus -1 (RP18)
> > acpiprt19 at acpi0: bus -1 (RP19)
> > acpiprt20 at acpi0: bus -1 (RP20)
> > acpiprt21 at acpi0: bus -1 (RP21)
> > acpiprt22 at acpi0: bus -1 (RP22)
> > acpiprt23 at acpi0: bus -1 (RP23)
> > acpiprt24 at acpi0: bus -1 (RP24)
> > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> > acpithinkpad0 at acpi0: version 2.0
> > acpiac0 at acpi0: AC unit online
> > acpibat0 at acpi0: BAT0 model "5B10W13930" serial 2150 type LiP oem
> "LGC"
> > "PNP0C60" at acpi0 not configured
> > "LEN0111" at acpi0 not configured
> > "LEN0100" at acpi0 not configured
> > "INT3403" at acpi0 not configured
> > pchgpio0 at acpi0 GPI0 addr 0xfd6e0000/0x10000 0xfd6d0000/0x10000
> > 0xfd6a0000/0x10000 irq 14, 320 pins
> > "ACPI000E" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > acpibtn0 at acpi0: SLPB
> > "PNP0C14" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > acpibtn1 at acpi0: LID_
> > "PNP0C14" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > "INT3400" at acpi0 not configured
> > "USBC000" at acpi0 not configured
> > acpipwrres0 at acpi0: PUBS, resource for XHC_
> > acpipwrres1 at acpi0: BTPR, resource for HS10
> > acpipwrres2 at acpi0: USBC, resource for XDCI
> > acpipwrres3 at acpi0: PXP_, resource for RP01, PXSX
> > acpipwrres4 at acpi0: PXP_, resource for RP13
> > acpipwrres5 at acpi0: V0PR
> > acpipwrres6 at acpi0: V1PR
> > acpipwrres7 at acpi0: V2PR
> > acpipwrres8 at acpi0: WRST
> > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
> > C1(1000@1 mwait.1)
> > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
> > C1(1000@1 mwait.1)
> > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
> > C1(1000@1 mwait.1)
> > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
> > C1(1000@1 mwait.1)
> > acpitz0 at acpi0: critical temperature is 128 degC
> > acpipwrres9 at acpi0: PIN_
> > acpipwrres10 at acpi0: PINP
> > acpivideo0 at acpi0: GFX0
> > acpivout0 at acpivideo0: DD1F
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x0c
> > inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 620" rev 0x02
> > drm0 at inteldrm0
> > inteldrm0: msi, COFFEELAKE, gen 9
> > "Intel Core 6G Thermal" rev 0x0c at pci0 dev 4 function 0 not configured
> > "Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
> > pchtemp0 at pci0 dev 18 function 0 "Intel 300 Series Thermal" rev 0x11
> > xhci0 at pci0 dev 20 function 0 "Intel 300 Series xHCI" rev 0x11: msi,
> > xHCI 1.10
> > usb0 at xhci0: USB revision 3.0
> > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> > 3.00/1.00 addr 1
> > "Intel 300 Series Shared SRAM" rev 0x11 at pci0 dev 20 function 2 not
> > configured
> > iwm0 at pci0 dev 20 function 3 "Intel Dual Band Wireless AC 9560" rev
> > 0x11, msix
> > "Intel 300 Series MEI" rev 0x11 at pci0 dev 22 function 0 not configured
> > ppb0 at pci0 dev 28 function 0 "Intel 300 Series PCIE" rev 0xf1: msi
> > pci1 at ppb0 bus 2
> > vendor "Intel", unknown product 0x7360 (class wireless unknown subclass
> > 0x40, rev 0x01) at pci1 dev 0 function 0 not configured
> > ppb1 at pci0 dev 29 function 0 "Intel 300 Series PCIE" rev 0xf1: msi
> > pci2 at ppb1 bus 3
> > nvme0 at pci2 dev 0 function 0 "SanDisk WD Black NVMe" rev 0x00: msix,
> > NVMe 1.3
> > nvme0: WDC PC SN730 SDBQNTY-1T00-1001, firmware 11130101, serial
> > 1951E5485614
> > scsibus1 at nvme0: 2 targets, initiator 0
> > sd0 at scsibus1 targ 1 lun 0: <NVMe, WDC PC SN730 SDB, 1113>
> > sd0: 976762MB, 512 bytes/sector, 2000409264 sectors
> > ppb2 at pci0 dev 29 function 4 "Intel 300 Series PCIE" rev 0xf1: msi
> > pci3 at ppb2 bus 5
> > ppb3 at pci3 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02
> > pci4 at ppb3 bus 6
> > ppb4 at pci4 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> > pci5 at ppb4 bus 7
> > "Intel JHL6540 Thunderbolt" rev 0x02 at pci5 dev 0 function 0 not
> > configured
> > ppb5 at pci4 dev 1 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> > pci6 at ppb5 bus 8
> > ppb6 at pci4 dev 2 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> > pci7 at ppb6 bus 45
> > xhci1 at pci7 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi,
> > xHCI 1.10
> > usb1 at xhci1: USB revision 3.0
> > uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev
> > 3.00/1.00 addr 1
> > ppb7 at pci4 dev 4 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> > pci8 at ppb7 bus 46
> > pcib0 at pci0 dev 31 function 0 "Intel 300 Series LPC" rev 0x11
> > azalia0 at pci0 dev 31 function 3 "Intel 300 Series HD Audio" rev 0x11:
> msi
> > azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
> > audio0 at azalia0
> > ichiic0 at pci0 dev 31 function 4 "Intel 300 Series SMBus" rev 0x11: apic
> > 2 int 16
> > iic0 at ichiic0
> > ichiic0: abort failed, status 0x41<BUSY,INUSE>
> > "Intel 300 Series SPI" rev 0x11 at pci0 dev 31 function 5 not configured
> > em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x11: msi, address
> > f8:75:a4:c8:62:06
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard
> > pms0 at pckbc0 (aux slot)
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > vmm0 at mainbus0: VMX/EPT
> > efifb at mainbus0 not configured
> > uhidev0 at uhub0 port 3 configuration 1 interface 0 "Yubico YubiKey
> > OTP+FIDO+CCID" rev 2.00/5.26 addr 2
> > uhidev0: iclass 3/1
> > ukbd0 at uhidev0: 8 variable keys, 6 key codes
> > wskbd1 at ukbd0 mux 1
> > uhidev1 at uhub0 port 3 configuration 1 interface 1 "Yubico YubiKey
> > OTP+FIDO+CCID" rev 2.00/5.26 addr 2
> > uhidev1: iclass 3/0
> > fido0 at uhidev1: input=64, output=64, feature=0
> > ugen0 at uhub0 port 3 configuration 1 "Yubico YubiKey OTP+FIDO+CCID" rev
> > 2.00/5.26 addr 2
> > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Azurewave Integrated
> > Camera" rev 2.01/69.05 addr 3
> > video0 at uvideo0
> > uvideo1 at uhub0 port 8 configuration 1 interface 2 "Azurewave Integrated
> > Camera" rev 2.01/69.05 addr 3
> > video1 at uvideo1
> > vscsi0 at root
> > scsibus2 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> > sd1: 976761MB, 512 bytes/sector, 2000407649 sectors
> > root on sd1a (69b037e186d738a3.a) swap on sd1b dump on sd1b
> > inteldrm0: 3840x2160, 32bpp
> > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using
> wskbd0
> > wskbd1: connecting to wsdisplay0
> > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > iwm0: hw rev 0x310, fw ver 34.3125811985.0, address f8:e4:e3:30:0a:07
> >
> >
>
> --
> Kindest regards,
> Tom Smyth.
>
