On Tue, Feb 9, 2021 at 3:59 PM Sven F. <sven.falem...@gmail.com> wrote:
>
> On Tue, Feb 9, 2021 at 3:45 PM Sven F. <sven.falem...@gmail.com> wrote:
> >
> > Dear readers,
> >
> > I found a computer which behaves oddly.
> > Only EFI boot is supported, I usually go the MBR way.
> > The bios looks like a classic AMibios Intel stuff.
> > The cpu is intel and there's an intel HD5500 graphic card
> > ( trying to extract proper dmesg fails so far )
> >
> > When booting 6.8 basic amd64 installation the video
> > signal is completely lost and network too ( suspect crash )
> >
> > I tried to `set  db_console 1` and change video mode
> > with machine video before booting, and entering
> > `boot dump` blindly ( video off )
> > but after rebooting in bsd.rd /var/ has no dmesg.anything
> > or some log
> >
> > I think the last line of boot i see is 'softraid0'
> >
> > There's probably a few tricks I should try to get the actual
> > message, I will do my best to extract the (bsd.rd) dmesg now and post it as
> > a reply ( and try boot current )
> >
> > Is there some boot option i can use or something i can do
> > to extract the errors ? ( i do not see com ports anywhere either )
> >
> > Thank you for reading.
> > --
> > --
>
> Looks like current already solved the problem,
>
> any chance to have this work on 'stable' ?
>
> OpenBSD 6.9-beta (GENERIC.MP) #323: Tue Feb  9 10:19:03 MST 2021
>     dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8485195776 (8092MB)
> avail mem = 8212697088 (7832MB)
> random: good seed from bootblocks
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xa4eef000 (81 entries)
> bios0: vendor American Megatrends Inc. version "5.011" date 06/19/2019
> bios0: Intel H81U
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S4 S5
> acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT UEFI LPIT SSDT
> ASF! SSDT SSDT SSDT DMAR
> acpi0: wakeup devices PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4)
> PEGP(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4)
> RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2694.11 MHz, 06-3d-04
> cpu0: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2693.79 MHz, 06-3d-04
> cpu1: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 1 (application processor)
> cpu2: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2693.78 MHz, 06-3d-04
> cpu2: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 1, core 0, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz, 2693.78 MHz, 06-3d-04
> cpu3: 
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf8000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG0)
> acpiprt2 at acpi0: bus -1 (PEG1)
> acpiprt3 at acpi0: bus -1 (PEG2)
> acpiprt4 at acpi0: bus -1 (RP01)
> acpiprt5 at acpi0: bus -1 (RP02)
> acpiprt6 at acpi0: bus 1 (RP03)
> acpiprt7 at acpi0: bus 2 (RP04)
> acpiprt8 at acpi0: bus -1 (RP05)
> acpiprt9 at acpi0: bus -1 (RP06)
> acpiprt10 at acpi0: bus -1 (RP07)
> acpiprt11 at acpi0: bus -1 (RP08)
> acpiec0 at acpi0: not present
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> acpicmos0 at acpi0
> acpibtn0 at acpi0: SLPB
> "INT33A1" at acpi0 not configured
> acpibtn1 at acpi0: PWRB
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> "PNP0C0B" at acpi0 not configured
> acpicpu0 at acpi0: C1(@1 halt!), PSS
> acpicpu1 at acpi0: C1(@1 halt!), PSS
> acpicpu2 at acpi0: C1(@1 halt!), PSS
> acpicpu3 at acpi0: C1(@1 halt!), PSS
> acpipwrres0 at acpi0: PG00, resource for PEG0
> acpipwrres1 at acpi0: PG01, resource for PEG1
> acpipwrres2 at acpi0: PG02, resource for PEG2
> acpipwrres3 at acpi0: WRST
> acpipwrres4 at acpi0: WRST
> acpipwrres5 at acpi0: WRST
> acpipwrres6 at acpi0: WRST
> acpipwrres7 at acpi0: WRST
> acpipwrres8 at acpi0: WRST
> acpipwrres9 at acpi0: WRST
> acpipwrres10 at acpi0: WRST
> acpipwrres11 at acpi0: FN00, resource for FAN0
> acpipwrres12 at acpi0: FN01, resource for FAN1
> acpipwrres13 at acpi0: FN02, resource for FAN2
> acpipwrres14 at acpi0: FN03, resource for FAN3
> acpipwrres15 at acpi0: FN04, resource for FAN4
> acpitz0 at acpi0: critical temperature is 105 degC
> acpitz1 at acpi0: critical temperature is 105 degC
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 2694 MHz: speeds: 2301, 2300, 2200, 2000,
> 1900, 1800, 1700, 1500, 1400, 1300, 1100, 1000, 900, 800, 600, 500 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi, BROADWELL, gen 8
> azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
> azalia0: No codecs found
> xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
> azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
> azalia1: codecs: Realtek ALC662
> audio0 at azalia1
> ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
> pci1 at ppb0 bus 1
> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H
> (0x5400), msi, address 00:e0:4c:35:11:5d
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> ppb1 at pci0 dev 28 function 3 "Intel 9 Series PCIE" rev 0xe3: msi
> pci2 at ppb1 bus 2
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6235" rev
> 0x24: msi, MIMO 2T2R, AGN, address c8:f7:33:d9:f2:45
> ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, SATA SSD, S9FM>
> t10.ATA_SATA_SSD_DC11074810EE00752763
> sd0: 15272MB, 512 bytes/sector, 31277232 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 
> 18
> iic0 at ichiic0
> iic0: addr 0x48 01=02 03=01 05=0c 06=20 07=08 08=20 09=20 0a=03 0b=90
> 0d=80 0e=02 0f=0d 10=02 11=23 13=e0 14=01 15=60 17=02 19=20 1b=98
> 1c=08 1d=c0 1f=80 20=07 21=65 22=04 23=2a 25=38 26=04 27=2d 29=06
> 2b=01 33=66 34=66 35=04 38=08 3a=20 3c=40 3d=20 3e=03 3f=20 40=48
> 43=24 47=08 4a=80 4b=ff 4c=04 50=08 51=30 52=20 53=01 56=01 58=26
> 60=28 61=0c 62=41 63=71 65=33 68=04 69=f1 6a=be 6b=01 6c=44 6d=04
> 77=06 78=57 79=13 7a=f9 7b=0e 7c=01 7d=f3 7e=09 7f=f9 80=13 81=02
> 8d=10 8e=10 8f=10 90=10 91=08 92=08 93=08 94=08 95=55 96=aa 97=40
> 98=21 99=11 9a=40 9b=40 9c=11 9d=11 a0=ee a1=01 a2=41 a4=03 a7=03
> aa=08 ab=20 ae=07 af=03 b1=40 b2=7c b3=07 b4=6f b5=bf b6=9c b7=08
> ba=11 bb=20 be=4f bf=0c c0=ff c1=ff c5=0d c6=60 ca=52 cb=80 cc=01
> cd=02 d1=01 d2=01 d3=22 d4=02 d6=03 d7=70 d8=48 d9=30 db=80 dc=55
> dd=55 de=55 e1=a5 e2=07 e3=03 e5=3f e6=bf e9=93 f0=03 f1=03 f2=40
> f3=10 f4=10 f5=ff f6=01 f7=10 f8=0a f9=07 fc=a1 fe=60 words 00=0002
> 01=0200 02=0001 03=0100 04=000c 05=0c20 06=2008 07=0820
> iic0: addr 0x49 00=11 01=0a 02=82 03=41 06=01 07=80 08=02 0c=0f 0d=03
> 20=0a 21=82 29=08 30=01 32=77 34=01 35=01 3c=47 3d=80 3e=45 3f=80
> 4b=0a 4c=04 69=20 80=43 81=ec 82=a5 83=6d 84=04 91=01 a1=01 a2=a2
> a5=80 a6=0a a7=ff a8=c0 a9=0a aa=0a ab=0a ad=40 c1=1c c2=f8 c3=44
> c4=32 c5=44 c6=4c c7=56 c8=35 ca=01 cb=07 cc=04 cd=04 ce=59 cf=86
> e1=10 e3=01 e4=ff words 00=110a 01=0a82 02=8241 03=4100 04=0000
> 05=0001 06=0180 07=8002
> iic0: addr 0x4a 12=08 1c=0c 60=18 64=01 66=30 68=01 69=20 6d=26 6e=bd
> 8a=b0 99=85 9b=07 9c=10 a1=91 a2=22 a3=04 a5=10 a6=01 a8=ff ae=01
> af=55 b1=20 bc=01 c8=01 df=29 e0=ff e2=01 e6=88 ef=03 fb=a0 fc=09
> fd=30 fe=05 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000
> 06=0000 07=0000
> iic0: addr 0x4b 23=02 24=a1 26=0f 28=ff 2e=a1 2f=aa 30=9b 31=08 36=66
> 37=66 38=04 3a=24 40=01 43=90 44=01 46=20 47=01 48=04 49=04 69=7c
> 72=10 73=a7 74=c0 75=fc 76=9b words 00=0000 01=0000 02=0000 03=0000
> 04=0000 05=0000 06=0000 07=0000
> iic0: addr 0x4c 00=b0 02=03 10=16 14=01 15=40 20=1c 21=58 23=11 30=a0
> 32=80 33=20 50=44 51=c4 53=04 54=14 56=df 57=0f 58=18 59=60 5a=01
> 5c=3f 5e=06 60=10 62=4c 63=14 70=41 71=2d 72=20 74=3c 75=05 77=f8
> 78=1f 79=80 7a=fd 7c=20 7d=04 7e=03 81=f0 82=ff 83=ff 86=a0 87=81
> 88=b0 89=08 8a=0c 90=ec 91=04 92=20 93=5f 94=30 95=e8 96=05 98=01
> 9a=03 9b=03 9c=04 9e=02 a0=32 a1=32 a2=b3 a3=72 a4=b2 a5=82 a7=0c
> a8=1f a9=ad aa=ff ab=0d ac=02 b4=05 c0=12 c1=92 c2=1c e2=80 e3=20
> f1=0a f2=25 f3=86 words 00=b000 01=0003 02=0300 03=0000 04=0000
> 05=0000 06=0000 07=0000
> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> it0 at isa0 port 0x2e/2: IT8772F rev 1, EC port 0xa20
> vmm0 at mainbus0: VMX/EPT
> efifb at mainbus0 not configured
> uhub2 at uhub0 port 6 configuration 1 interface 0 "Terminus Technology
> USB 2.0 Hub" rev 2.00/1.11 addr 2
> uvideo0 at uhub2 port 2 configuration 1 interface 0 "Alcor Micro,
> Corp. USB 2.0 PC Camera" rev 2.00/0.01 addr 3
> video0 at uvideo0
> uaudio0 at uhub2 port 2 configuration 1 interface 3 "Alcor Micro,
> Corp. USB 2.0 PC Camera" rev 2.00/0.01 addr 3
> uaudio0: class v1, high-speed, sync, channels: 0 play, 2 rec, 4 ctls
> audio1 at uaudio0
> uhidev0 at uhub2 port 4 configuration 1 interface 0 "Micro Keyboard
> Micro Keyboard" rev 2.00/0.01 addr 4
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd0 at ukbd0: console keyboard
> uhidev1 at uhub2 port 4 configuration 1 interface 1 "Micro Keyboard
> Micro Keyboard" rev 2.00/0.01 addr 4
> uhidev1: iclass 3/1, 5 report ids
> ums0 at uhidev1 reportid 1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
> uhid2 at uhidev1 reportid 4: input=0, output=0, feature=7
> uhid3 at uhidev1 reportid 5: input=0, output=0, feature=7
> ugen0 at uhub0 port 7 "Intel product 0x07da" rev 2.00/78.69 addr 5
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.03 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (669ac83e5a3290a4.a) swap on sd0b dump on sd0b
> inteldrm0: 1024x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>

So it is now a black screen issue :-(

Probably because it uses a  `Lvds Flat Panel Connector` ,

is there a way to get xrandr output in a console ??


I used : startx  /root/info.sh -- -logverbose 6
with
# cat /root/info.sh
#!/bin/ksh
xrandr --verbose --listmonitors
xrandr --verbose --listactivemonitors


which list

Screen 0: minimum 320 x 200, current 1024 x 768, maximum 16384 x 16384
eDP-1 connected primary 1024x768+0+0 (0x47) normal (normal left
inverted right x axis y axis) 0mm x 0mm
        Identifier: 0x42
        Timestamp:  485368
        Subpixel:   unknown
        Gamma:      1.0:1.0:1.0
        Brightness: 1.0
        Clones:
        CRTC:       0
        CRTCs:      0 1 2
        Transform:  1.000000 0.000000 0.000000
                    0.000000 1.000000 0.000000
                    0.000000 0.000000 1.000000
                   filter:
        Backlight: 937
                range: (0, 937)
        scaling mode: Full aspect
                supported: Full, Center, Full aspect
        Colorspace: Default
                supported: Default, RGB_Wide_Gamut_Fixed_Point,
RGB_Wide_Gamut_Floating_Point, opRGB, DCI-P3_RGB_D65, BT2020_RGB,
BT601_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601,
BT2020_CYCC, BT2020_YCC
        max bpc: 12
                range: (6, 12)
        Broadcast RGB: Automatic
                supported: Automatic, Full, Limited 16:235
        panel orientation: Normal
                supported: Normal, Upside Down, Left Side Up, Right Side Up
        link-status: Good
                supported: Good, Bad
        CONNECTOR_ID: 77
                supported: 77
        non-desktop: 0
                range: (0, 1)
  1024x768 (0x47) 65.000MHz -HSync -VSync *current +preferred
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz


and

DP-1 disconnected
HDMI-1 disconnected
HDMI-2 disconnected

etc...

How do I select this screen 0 ??? since starting xenodm do not show anything



-- 
--
---------------------------------------------------------------------------------------------------------------------
Knowing is not enough; we must apply. Willing is not enough; we must do

Reply via email to