Thought I'd blow the dust off of an apu1 I had around, but the installer seems to not fully load the kernel and reboots early on.
In case this device is now mushy on the brain: - <https://www.pcengines.ch/apu.htm> - <https://www.pcengines.ch/apu1d4.htm> Details: - AMD G series T40E APU, 1 GHz dual core (Bobcat core) with 64 bit support, 32K data + 32K instruction + 512KB L2 cache per core - DRAM: 2 or 4 GB DDR3-1066 DRAM with a 64 bit bus - Storage: Boot from SD card (connected through USB), external USB or m-SATA SSD. 1 SATA data + power connector. - Power: About 6 to 12W of 12V DC power depending on CPU load. - Expansion: 2 miniPCI express (one with SIM socket for 3G modem), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD/TXD). - Connectivity: 3 Gigabit Ethernet (Realtek RTL8111E), 1 DB9 serial port (console). - Firmware: coreboot open source system BIOS with support for iPXE and USB boot. Console log: PC Engines APU BIOS build date: Apr 5 2014 Reading data from file [bootorder] SeaBIOS (version ?-20140405_120742-frink) SeaBIOS (version ?-20140405_120742-frink) Found coreboot cbmem console @ df150400 Found mainboard PC Engines APU Relocating init from 0x000e8e71 to 0xdf1065e0 (size 39259) Found CBFS header at 0xfffffb90 found file "bootorder" in cbmem CPU Mhz=1001 Found 29 PCI devices (max PCI bus is 06) Copying PIR from 0xdf160400 to 0x000f27a0 Copying MPTABLE from 0xdf161400/df161410 to 0x000f25a0 with length 1f4 Copying ACPI RSDP from 0xdf162400 to 0x000f2580 Copying SMBIOS entry point from 0xdf16d800 to 0x000f2560 Using pmtimer, ioport 0x808 Scan for VGA option rom EHCI init on dev 00:12.2 (regs=0xf7f08420) Found 1 lpt ports Found 2 serial ports AHCI controller at 11.0, iobase f7f08000, irq 11 EHCI init on dev 00:13.2 (regs=0xf7f08520) EHCI init on dev 00:16.2 (regs=0xf7f08620) Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0 AHCI/0: registering: "AHCI/0: SATA SSD ATA-10 Hard-Disk (15272 MiBytes)" Searching bootorder for: /rom@img/setup Searching bootorder for: /rom@img/memtest OHCI init on dev 00:12.0 (regs=0xf7f04000) OHCI init on dev 00:13.0 (regs=0xf7f05000) OHCI init on dev 00:14.5 (regs=0xf7f06000) OHCI init on dev 00:16.0 (regs=0xf7f07000) Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0 Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1 Searching bootorder for: /pci@i0cf8/usb@12,2/storage@5/*@0/*@0,0 Searching bootorder for: /pci@i0cf8/usb@12,2/usb-*@5 USB MSC vendor='Multiple' product='Card Reader' rev='1.00' type=0 removable=1 Device reports MEDIUM NOT PRESENT scsi_is_ready returned -1 Unable to configure USB MSC drive. Unable to configure USB MSC device. USB MSC vendor='SanDisk' product='Cruzer Blade' rev='1.00' type=0 removable=1 USB MSC blksize=512 sectors=61341696 All threads complete. Scan for option roms Running option rom at c000:0003 iPXE (http://ipxe.org) 00:00.0 C000 PCI2.10 PnP PMMpmm call arg1=1 pmm call arg1=0 +DF0E2FD0pmm call arg1=1 pmm call arg1=0 +DF042FD0 C000 Searching bootorder for: /rom@genroms/pxeboot.rom Build date: Apr 5 2014 System memory size: 4592 MB Press F12 for boot menu. Searching bootorder for: HALT drive 0x000f2490: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=61341696 drive 0x000f24f0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=31277232 Space available for UMB: c1000-ee800, f0000-f2490 Returned 253952 bytes of ZoneHigh e820 map has 7 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 00000000df14e000 = 1 RAM 4: 00000000df14e000 - 00000000e0000000 = 2 RESERVED 5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED 6: 0000000100000000 - 000000011f000000 = 1 RAM enter handle_19: NULL Booting from Hard Disk... Booting from 0000:7c00 Using drive 0, partition 3. Loading...... probing: pc0 com0 com1 mem[639K 3568M 496M a20=on] disk: hd0+ hd1+ >> OpenBSD/amd64 BOOT 3.53 boot> cannot open hd0a:/etc/random.seed: No such file or directory booting hd0a:/7.0/amd64/bsd.rd: 3830471+1598464+3907256+0+704512 [109+288+28]=0x995530 entry point at 0xffffffff81001000 PC Engines APU BIOS build date: Apr 5 2014 The last line there shows the boot cycle begin again. What's the advice on troubleshooting/addressing? No crash, so was going to work back in versions and see if anything takes. -- Darren Spruell [email protected]
