stty com0 9600 (or whatever speed you want to use) set tty com0 On 2021-12-28, Darren S. <[email protected]> wrote: > Thought I'd blow the dust off of an apu1 I had around, but the installer > seems to not fully load the kernel and reboots early on. > > In case this device is now mushy on the brain: > > - <https://www.pcengines.ch/apu.htm> > - <https://www.pcengines.ch/apu1d4.htm> > > Details: > - AMD G series T40E APU, 1 GHz dual core (Bobcat core) with 64 bit support, > 32K data + 32K instruction + 512KB L2 cache per core > - DRAM: 2 or 4 GB DDR3-1066 DRAM with a 64 bit bus > - Storage: Boot from SD card (connected through USB), external USB or m-SATA > SSD. 1 SATA data + power connector. > - Power: About 6 to 12W of 12V DC power depending on CPU load. > - Expansion: 2 miniPCI express (one with SIM socket for 3G modem), LPC bus, > GPIO header, I2C bus, COM2 (3.3V RXD/TXD). > - Connectivity: 3 Gigabit Ethernet (Realtek RTL8111E), 1 DB9 serial port > (console). > - Firmware: coreboot open source system BIOS with support for iPXE and USB > boot. > > > Console log: > > PC Engines APU BIOS build date: Apr 5 2014 > > Reading data from file [bootorder] > > SeaBIOS (version ?-20140405_120742-frink) > > SeaBIOS (version ?-20140405_120742-frink) > > Found coreboot cbmem console @ df150400 > > Found mainboard PC Engines APU > > Relocating init from 0x000e8e71 to 0xdf1065e0 (size 39259) > > Found CBFS header at 0xfffffb90 > > found file "bootorder" in cbmem > > CPU Mhz=1001 > > Found 29 PCI devices (max PCI bus is 06) > > Copying PIR from 0xdf160400 to 0x000f27a0 > > Copying MPTABLE from 0xdf161400/df161410 to 0x000f25a0 with length 1f4 > > Copying ACPI RSDP from 0xdf162400 to 0x000f2580 > > Copying SMBIOS entry point from 0xdf16d800 to 0x000f2560 > > Using pmtimer, ioport 0x808 > > Scan for VGA option rom > > EHCI init on dev 00:12.2 (regs=0xf7f08420) > > Found 1 lpt ports > > Found 2 serial ports > > AHCI controller at 11.0, iobase f7f08000, irq 11 > EHCI init on dev 00:13.2 (regs=0xf7f08520) > EHCI init on dev 00:16.2 (regs=0xf7f08620) > Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0 > AHCI/0: registering: "AHCI/0: SATA SSD ATA-10 Hard-Disk (15272 MiBytes)" > Searching bootorder for: /rom@img/setup > Searching bootorder for: /rom@img/memtest > OHCI init on dev 00:12.0 (regs=0xf7f04000) > OHCI init on dev 00:13.0 (regs=0xf7f05000) > OHCI init on dev 00:14.5 (regs=0xf7f06000) > OHCI init on dev 00:16.0 (regs=0xf7f07000) > Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0 > Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1 > Searching bootorder for: /pci@i0cf8/usb@12,2/storage@5/*@0/*@0,0 > Searching bootorder for: /pci@i0cf8/usb@12,2/usb-*@5 > USB MSC vendor='Multiple' product='Card Reader' rev='1.00' type=0 > removable=1 > Device reports MEDIUM NOT PRESENT > scsi_is_ready returned -1 > Unable to configure USB MSC drive. > Unable to configure USB MSC device. > USB MSC vendor='SanDisk' product='Cruzer Blade' rev='1.00' type=0 > removable=1 > USB MSC blksize=512 sectors=61341696 > All threads complete. > Scan for option roms > Running option rom at c000:0003 > > iPXE (http://ipxe.org) 00:00.0 C000 PCI2.10 PnP PMMpmm call arg1=1 > pmm call arg1=0 > +DF0E2FD0pmm call arg1=1 > pmm call arg1=0 > +DF042FD0 C000 > > > Searching bootorder for: /rom@genroms/pxeboot.rom > > Build date: Apr 5 2014 > System memory size: 4592 MB > > Press F12 for boot menu. > > Searching bootorder for: HALT > drive 0x000f2490: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=61341696 > drive 0x000f24f0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > s=31277232 > Space available for UMB: c1000-ee800, f0000-f2490 > Returned 253952 bytes of ZoneHigh > e820 map has 7 items: > 0: 0000000000000000 - 000000000009fc00 = 1 RAM > 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED > 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED > 3: 0000000000100000 - 00000000df14e000 = 1 RAM > 4: 00000000df14e000 - 00000000e0000000 = 2 RESERVED > 5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED > 6: 0000000100000000 - 000000011f000000 = 1 RAM > enter handle_19: > NULL > Booting from Hard Disk... > Booting from 0000:7c00 > Using drive 0, partition 3. > Loading...... > probing: pc0 com0 com1 mem[639K 3568M 496M a20=on] > disk: hd0+ hd1+ >>> OpenBSD/amd64 BOOT 3.53 > boot> > cannot open hd0a:/etc/random.seed: No such file or directory > booting hd0a:/7.0/amd64/bsd.rd: 3830471+1598464+3907256+0+704512 > [109+288+28]=0x995530 > entry point at 0xffffffff81001000 > PC Engines APU BIOS build date: Apr 5 2014 > > > The last line there shows the boot cycle begin again. What's the advice on > troubleshooting/addressing? No crash, so was going to work back in versions > and see if anything takes. >
-- Please keep replies on the mailing list.
