Hi.
I have a disk from an Alpha server that I need to get data from... The
Alpha server no longer boots, and I dont have the time right now to
diagnose the problem. So I took the disk and lashed it into a Sun Ultra60,
which is also running OpenBSD. My problem is that I cant remember all of
the details of the partitioning that the disk had... So in terms of
getting access to the data, how do I find out what to put into disklabel
for it? Unfortunately due to other complications, I currently dont have
fdisk on the machine.
(only 2 slots for Ultra2 SCSI Wide, one was root disk, other was /usr.
Copied as much stuff onto the root disk that space would alow, so that I
could remove the origional /usr disk and put in the one I need the data
from. This caused some stuff not to work because not all of it could be
copied over)
Larry
machine$ disklabel sd1
# /dev/rsd1c:
type: SCSI
disk: SCSI disk
label: RZ2DD-LS (C) DEC
flags:
bytes/sector: 512
sectors/track: 168
tracks/cylinder: 20
sectors/cylinder: 3360
cylinders: 5273
total sectors: 17773524
rpm: 10045
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
3 partitions:
# size offset fstype [fsize bsize cpg]
c: 17773524 0 unused 0 0 # Cyl 0 -
5289*
disklabel: warning, partition c: size % cylinder-size != 0
machine$
machine$ disklabel -r sd1
disklabel: no disklabel found. scanning.
disklabel: no disk label
machine$
machine$ dmesg
console is /[EMAIL PROTECTED],4000/[EMAIL PROTECTED]/[EMAIL PROTECTED],400000:a
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.7-current (GENERIC) #453: Thu Apr 14 23:32:06 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 268435456
avail memory = 235053056
using 1638 buffers containing 13418496 bytes of memory
bootpath: /[EMAIL PROTECTED],4000/[EMAIL PROTECTED],0/[EMAIL PROTECTED],0
mainbus0 (root): Sun Ultra 60 UPA/PCI (2 X UltraSPARC-II 296MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-II @ 295.998 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 2048K external
(64 b/l)
psycho0 at mainbus0 addr 0xfffb4000
SUNW,psycho: impl 0, version 4: ign 7c0 bus range 0 to 0; PCI bus 0
STC0 on /mainbus enabled
DVMA map: fe000000 to ffffe000
IOTDB: a1360000 to a1368000
pci0 at psycho0
ebus0 at pci0 dev 1 function 0 "Sun PCIO Ebus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003,
72c000-72c003, 72f000-72f003
power at ebus0 addr 724000-724003 not configured
SUNW,pll at ebus0 addr 504000-504002 not configured
uperf0 at ebus0 addr 500000-500007: model SUNW,sc-qp (0/1) ports 9
sab0 at ebus0 addr 400000-40007f ipl 43: rev 3.2
sabtty0 at sab0 port 0: console i/o
sabtty1 at sab0 port 1
comkbd0 at ebus0 addr 3083f8-3083ff ipl 41: no keyboard
com0 at ebus0 addr 3062f8-3062ff ipl 42, mouse: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ipl 34:
polled
fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39
not configured
clock1 at ebus0 addr 0-1fff: mk48t59: hostid 80b3c979
flashprom at ebus0 addr 0-fffff not configured
audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f,
722000-722003 ipl 35 ipl 36: nvaddrs 0
audio0 at audioce0
hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: address
08:00:20:b3:c9:79
qsphy0 at hme0 phy 1: QS6612 10/100 PHY, rev. 1
hme0: using ivec 3021 for interrupt
siop0 at pci0 dev 3 function 0 "Symbios Logic 53c875" rev 0x14: ivec 20,
using 4K of on-board RAM
scsibus0 at siop0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <IBM, DDRS34560SUN4.2G, S98E> SCSI2 0/direct
fixed
sd0: 4094MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sec, 8385121 sec total
sd1 at scsibus0 targ 1 lun 0: <DEC, RZ2DD-LS (C) DEC, 0306> SCSI2 0/direct
fixed
sd1: 8678MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sec, 17773524 sec total
st0 at scsibus0 targ 3 lun 0: <HP, C1537A, L907> SCSI2 1/sequential
removable
st0: density code 0x25, variable blocks, write-enabled
siop1 at pci0 dev 3 function 1 "Symbios Logic 53c875" rev 0x14: ivec 26,
using 4K of on-board RAM
scsibus1 at siop1: 16 targets
psycho1 at mainbus0 addr 0xfffc6000
SUNW,psycho: impl 0, version 4: ign 7c0 bus range 128 to 128; PCI bus 128
STC0 on /mainbus enabled
STC1 on /mainbus enabled
pci1 at psycho1
timer0 at mainbus0 addr 0xfff9fc00 irq vectors 7ec and 7ed
creator0 at mainbus0 addr 0xfebc0000: Elite3D, model SUNW,XXX-XXXX, dac 0
wsdisplay0 at creator0
wsdisplay0: screen 0 added (std, sun emulation)
pcons at mainbus0 not configured
root on sd0a
siop0: target 0 now using tagged 16 bit 20.0 MHz 15 REQ/ACK offset xfers
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102
siop0: target 1 now using tagged 16 bit 20.0 MHz 15 REQ/ACK offset xfers
machine$
