Hi folks,
I'm installing 3.9 on my soekris 4801.
I'm installing on new IBM travelstar harddrive.
I't makes som strange errors? Can anyone enlighten me?
Is it just a bad harddrive?
I have attached a dmesg and the output which occured during installation.
Thanks in advance
- Lasse Bach
OpenBSD 3.9 (RAMDISK_CD) #1025: Thu Mar 2 02:43:29 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem = 133799936 (130664K)
avail mem = 116527104 (113796K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 20/50/29, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
address 00:00:24:c3:8e:84
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
address 00:00:24:c3:8e:85
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
address 00:00:24:c3:8e:86
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
ral0 at pci0 dev 10 function 0 "Ralink RT2560" rev 0x01: irq 11, address
00:08:a1:8d:36:cd
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
"NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTE721080G9AT00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
"NS SC1100 X-Bus" rev 0x00 at pci0 dev 18 function 5 not configured
ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 5, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask f3e5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
syncing disks... done
OpenBSD 3.9 (RAMDISK_CD) #1025: Thu Mar 2 02:43:29 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem = 133799936 (130664K)
avail mem = 116527104 (113796K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 20/50/29, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
address 00:00:24:c3:8e:84
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
address 00:00:24:c3:8e:85
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10,
address 00:00:24:c3:8e:86
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
ral0 at pci0 dev 10 function 0 "Ralink RT2560" rev 0x01: irq 11, address
00:08:a1:8d:36:cd
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
"NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTE721080G9AT00>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
"NS SC1100 X-Bus" rev 0x00 at pci0 dev 18 function 5 not configured
ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 5, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at gscpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask f3e5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1
wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0: transfer error, downgrading to Ultra-DMA mode 0
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 0
wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0: transfer error, downgrading to DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn
33), retrying
wd0: soft error (corrected)
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0: transfer error, downgrading to PIO mode 4
wd0(pciide0:0:0): using PIO mode 4
wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn
33), retrying
wd0: soft error (corrected)
Mount point for wd0d (size=409752k)? (or 'none' or 'done') /tmp
Mount point for wd0e (size=3583944k)? (or 'none' or 'done') /usr
Mount point for wd0f (size=5243112k)? (or 'none' or 'done') /var
Mount point for wd0g (size=52428600k)? (or 'none' or 'done') /home
Mount point for wd0d (size=409752k)? (or 'none' or 'done') [/tmp] done
No more disks to initialize.
OpenBSD filesystems:
wd0a /
wd0d /tmp
wd0e /usr
wd0f /var
wd0g /home
The next step *DESTROYS* all existing data on these partitions!
Are you really sure that you're ready to proceed? [no] yes
/dev/rwd0a: 409184 sectors in 406 cylinders of 16 tracks, 63 sectors
199.8MB in 2 cyl/dev/rwd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1
wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0: transfer error, downgrading to Ultra-DMA mode 0
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 0
wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0: transfer error, downgrading to DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 1638096; cn 1625 tn 1 sn
33), retrying
wd0: soft error (corrected)
/dev/rwd0e: 7167888 sectors in 7111 cylinders of 16 tracks, 63 sectors
3499.9MB in 22 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
wd0(pciide0:0:0): timeout
wd0d: 819504 sectors in 813 cylinders of 16 tracks, 63 sectors
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn
33), retrying
wd0(pciide0:0:0): timeout
type: ata
c_bcount: 16384
c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0: transfer error, downgrading to PIO mode 4
wd0(pciide0:0:0): using PIO mode 4
wd0e: device timeout writing fsbn 96 of 96-127 (wd0 bn 2457600; cn 2438 tn 1 sn
33), retrying
wd0: soft error (corrected)
/dev/rwd0f: 10486224 sectors in 10403 cylinders of 16 tracks, 63 sectors
5120.2MB in 32 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
/dev/rwd0g: 104857200 sectors in 104025 cylinders of 16 tracks, 63 sectors
51199.8MB in 318 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
