Do you see any kernel output at all? I believe one
should always see at least the boot> prompt -
unless the serial speed of the console doesn't match
Do you see the boot> prompt and have you tried "verbose"?
On 5/11/06, Robert <[EMAIL PROTECTED]> wrote:
Alexander Farber wrote:
> h754815:afarber {103} cat /etc/hostname.fxp0
> inet 81.169.186.95 255.255.255.255 NONE
> !route add 81.169.186.1 -link \$if: -interface
>
> PS: I wonder if anyone successfully runs OpenBSD
> at Strato's SR2, MR2 or LR2 as I'd like to upgrade
>
> On 5/11/06, Dan Farrell <[EMAIL PROTECTED]> wrote:
>> Geez network setups just shouldn't be that strained... I mean, what
>> happened to hooking up a server with a /30 connection to the nearest
>> router? Am I missing something?
>
>
I think Strato, 1&1 and co introduced the .255 hack to counter sniffing.
Using .0 netmask works, but won't allow traffic with other hosts in the
same subnet. (Which shouldn't be a problem for most.)
I have not tried any of the new Strato servers, but am experimenting
with one of 1&1's new AMD64 systems.
So far, nothing that i dd to the hd will boot.
(tried 3.9 and current floppy and cd, modified for serial-acc and also
disabling the usual kernel-options like pcibios)
Anyone got one of those systems to run OpenBSD?
For those interested here's the debian-resycue-system dmesg and lspci
output for an 1&1 L64 server. Perhaps someone can see unsupported
hardware i don't.
http://openbsd.pap.st/1und1_L64.txt
Any advice'd be much apreciated.
