On Mon, May 15, 2006 at 11:43:15AM +0200, Georg Wendenburg wrote:
> Hi,
re
> Installed a 3.9 release, on a Dell PowerEdge 1850 with two Xeon EM64T
> CPUs, using de amd64.SMP kernel the keyboard and the CD did not work
> anymore, but the rest works fine, booting from the single cpu
> amd64 kernel all works fine, and with the i386.SMP all works fine too.
>
> Are there some tweaks to make the keyboard and the cd work with
> the amd64.SMP kernel, or i must stay away from the amd64.SMP kernel
> on this server?
>
> dmesgs from amd64.SMP and i386.SMP below.
did you check if there is a bios update for that board?
> ***** dmesg amd64.SMP ******
>
> >OpenBSD 3.9 (GENERIC.MP) #736: Thu Mar 2 04:02:03 MST 2006
> > [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> >real mem = 2146828288 (2096512K)
> >avail mem = 1835593728 (1792572K)
> >using 22937 buffers containing 214892544 bytes (209856K) of memory
> >mainbus0 (root)
> >ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
> >mainbus0: Intel MP Specification (Version 1.4) (DELL PE 016C )
> >cpu0 at mainbus0: apid 0 (boot processor)
> >cpu0: Intel(R) Xeon(TM) CPU 3.00GHz, 2993.11 MHz
> >cpu0:
> >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
> >cpu0: 2MB 64b/line 8-way L2 cache
> >cpu0: apic clock running at 199MHz
> >cpu1 at mainbus0: apid 6 (application processor)
> >cpu1: Intel(R) Xeon(TM) CPU 3.00GHz, 2992.70 MHz
> >cpu1:
> >FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
> >cpu1: 2MB 64b/line 8-way L2 cache
> >mpbios: bus 0 is type PCI
> >mpbios: bus 1 is type PCI
> >mpbios: bus 2 is type PCI
> >mpbios: bus 3 is type PCI
> >mpbios: bus 4 is type PCI
> >mpbios: bus 5 is type PCI
> >mpbios: bus 6 is type PCI
> >mpbios: bus 7 is type PCI
> >mpbios: bus 8 is type PCI
> >mpbios: bus 9 is type PCI
> >mpbios: bus 10 is type ISA
> >ioapic0 at mainbus0 apid 7: pa 0xffff80000373de24, version 20, 24 pins
> >ioapic0: misconfigured as apic 0
> >ioapic0: remapped to apic 7
> >ioapic1 at mainbus0 apid 8: pa 0xffff80000373dd24, version 20, 24 pins
> >ioapic1: misconfigured as apic 0
> >ioapic1: remapped to apic 8
> >ioapic2 at mainbus0 apid 9: pa 0xffff80000373dc24, version 20, 24 pins
> >ioapic2: misconfigured as apic 0
> >ioapic2: remapped to apic 9
> >pci0 at mainbus0 bus 0: configuration mode 1
> >pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
> >ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
> >pci1 at ppb0 bus 1
> >ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x06
> >pci2 at ppb1 bus 2
> >ami0 at pci2 dev 14 function 0 "Dell PERC 4e/Di" rev 0x06: apic 8 int 14
> >(irq 7) Dell 16c 32b
> >ami0: FW 521X, BIOS vH430, 256MB RAM
> >ami0: 1 channels, 0 FC loops, 1 logical drives
> >scsibus0 at ami0: 40 targets
> >sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
> >sd0: 69880MB, 69880 cyl, 64 head, 32 sec, 512 bytes/sec, 143114240 sec
> >total
> >scsibus1 at ami0: 16 targets
> >safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x2 SCSI BP, 1.0> SCSI2
> >3/processor fixed
> >ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x06
> >pci3 at ppb2 bus 3
> >ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x09
> >pci4 at ppb3 bus 4
> >ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x09
> >pci5 at ppb4 bus 5
> >ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> >pci6 at ppb5 bus 6
> >em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 9
> >int 0 (irq 11), address 00:13:72:53:2f:6c
> >ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
> >pci7 at ppb6 bus 7
> >em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 9
> >int 1 (irq 3), address 00:13:72:53:2f:6d
> >ppb7 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x09
> >pci8 at ppb7 bus 8
> >uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 7
> >int 16 (irq 11)
> >usb0 at uhci0: USB revision 1.0
> >uhub0 at usb0
> >uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> >uhub0: 2 ports with 2 removable, self powered
> >uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 7
> >int 19 (irq 10)
> >usb1 at uhci1: USB revision 1.0
> >uhub1 at usb1
> >uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> >uhub1: 2 ports with 2 removable, self powered
> >uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 7
> >int 18 (irq 7)
> >usb2 at uhci2: USB revision 1.0
> >uhub2 at usb2
> >uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> >uhub2: 2 ports with 2 removable, self powered
> >ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 7
> >int 23 (irq 5)
> >usb3 at ehci0: USB revision 2.0
> >uhub3 at usb3
> >uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
> >uhub3: 6 ports with 6 removable, self powered
> >ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
> >pci9 at ppb8 bus 9
> >vga1 at pci9 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
> >wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
> >pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
> >channel 0 configured to compatibility, channel 1 configured to
> >compatibility
> >atapiscsi0 at pciide0 channel 0 drive 0
> >scsibus2 at atapiscsi0: 2 targets
> >cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0
> >5/cdrom removable
> >cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> >pciide0: channel 1 disabled (no drives)
> >isa0 at pcib0
> >isadma0 at isa0
> >com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >pckbc0 at isa0 port 0x60/5
> >pckbd0 at pckbc0 (kbd slot)
> >pckbc0: using irq 1 for kbd slot
> >wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >pcppi0 at isa0 port 0x61
> >midi0 at pcppi0: <PC speaker>
> >spkr0 at pcppi0
> >fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> >uhub4 at uhub3 port 3
> >uhub4: Dell product 0xa001, rev 2.00/0.00, addr 2
> >uhub4: 2 ports with 2 removable, self powered, multiple transaction
> >translators
> >dkcsum: sd0 matches BIOS drive 0x80
> >root on sd0a
> >rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
>
> ***** end dmesg amd64.SMP ******
>
>
> ***** dmesg i386.SMP ******
>
> >OpenBSD 3.9 (GENERIC.MP) #598: Thu Mar 2 02:37:06 MST 2006
> > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> >cpu0: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> >cpu0:
> >FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
> >real mem = 2146807808 (2096492K)
> >avail mem = 1952759808 (1906992K)
> >using 4278 buffers containing 107442176 bytes (104924K) of memory
> >mainbus0 (root)
> >bios0 at mainbus0: AT/286+(00) BIOS, date 01/09/06, BIOS32 rev. 0 @ 0xffe90
> >pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> >pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb140/272 (15 entries)
> >pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev
> >0x00)
> >pcibios0: PCI bus #9 is the last bus
> >bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000 0xcc000/0x1000
> >0xcd000/0x2200 0xec000/0x4000!
> >ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
> >mainbus0: Intel MP Specification (Version 1.4) (DELL PE 016C )
> >cpu0 at mainbus0: apid 0 (boot processor)
> >cpu0: apic clock running at 199 MHz
> >cpu1 at mainbus0: apid 6 (application processor)
> >cpu1: Intel(R) Xeon(TM) CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
> >cpu1:
> >FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
> >mainbus0: bus 0 is type PCI
> >mainbus0: bus 1 is type PCI
> >mainbus0: bus 2 is type PCI
> >mainbus0: bus 3 is type PCI
> >mainbus0: bus 4 is type PCI
> >mainbus0: bus 5 is type PCI
> >mainbus0: bus 6 is type PCI
> >mainbus0: bus 7 is type PCI
> >mainbus0: bus 8 is type PCI
> >mainbus0: bus 9 is type PCI
> >mainbus0: bus 10 is type ISA
> >ioapic0 at mainbus0: apid 7 pa 0xfec00000, version 20, 24 pins
> >ioapic0: misconfigured as apic 0, remapped to apic 7
> >ioapic1 at mainbus0: apid 8 pa 0xfec80000, version 20, 24 pins
> >ioapic1: misconfigured as apic 0, remapped to apic 8
> >ioapic2 at mainbus0: apid 9 pa 0xfec83000, version 20, 24 pins
> >ioapic2: misconfigured as apic 0, remapped to apic 9
> >pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> >pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
> >ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
> >pci1 at ppb0 bus 1
> >ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x06
> >pci2 at ppb1 bus 2
> >ami0 at pci2 dev 14 function 0 "Dell PERC 4e/Di" rev 0x06: apic 8 int 14
> >(irq 7) Dell 16c 32b
> >ami0: FW 521X, BIOS vH430, 256MB RAM
> >ami0: 1 channels, 0 FC loops, 1 logical drives
> >scsibus0 at ami0: 40 targets
> >sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
> >sd0: 69880MB, 69880 cyl, 64 head, 32 sec, 512 bytes/sec, 143114240 sec
> >total
> >scsibus1 at ami0: 16 targets
> >safte0 at scsibus1 targ 6 lun 0: <PE/PV, 1x2 SCSI BP, 1.0> SCSI2
> >3/processor fixed
> >ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x06
> >pci3 at ppb2 bus 3
> >ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x09
> >pci4 at ppb3 bus 4
> >ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x09
> >pci5 at ppb4 bus 5
> >ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> >pci6 at ppb5 bus 6
> >em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 9
> >int 0 (irq 11), address 00:13:72:53:2f:6c
> >ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
> >pci7 at ppb6 bus 7
> >em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: apic 9
> >int 1 (irq 3), address 00:13:72:53:2f:6d
> >ppb7 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x09
> >pci8 at ppb7 bus 8
> >uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 7
> >int 16 (irq 11)
> >usb0 at uhci0: USB revision 1.0
> >uhub0 at usb0
> >uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> >uhub0: 2 ports with 2 removable, self powered
> >uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 7
> >int 19 (irq 10)
> >usb1 at uhci1: USB revision 1.0
> >uhub1 at usb1
> >uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> >uhub1: 2 ports with 2 removable, self powered
> >uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: apic 7
> >int 18 (irq 7)
> >usb2 at uhci2: USB revision 1.0
> >uhub2 at usb2
> >uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> >uhub2: 2 ports with 2 removable, self powered
> >ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 7
> >int 23 (irq 5)
> >usb3 at ehci0: USB revision 2.0
> >uhub3 at usb3
> >uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
> >uhub3: 6 ports with 6 removable, self powered
> >ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
> >pci9 at ppb8 bus 9
> >vga1 at pci9 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
> >wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
> >pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
> >channel 0 configured to compatibility, channel 1 configured to
> >compatibility
> >atapiscsi0 at pciide0 channel 0 drive 0
> >scsibus2 at atapiscsi0: 2 targets
> >cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0
> >5/cdrom removable
> >cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> >pciide0: channel 1 disabled (no drives)
> >isa0 at ichpcib0
> >isadma0 at isa0
> >pckbc0 at isa0 port 0x60/5
> >pckbd0 at pckbc0 (kbd slot)
> >pckbc0: using irq 1 for kbd slot
> >wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >pcppi0 at isa0 port 0x61
> >midi0 at pcppi0: <PC speaker>
> >spkr0 at pcppi0
> >npx0 at isa0 port 0xf0/16: using exception 16
> >pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> >biomask 0 netmask 0 ttymask 0
> >pctr: user-level cycle counter enabled
> >uhub4 at uhub3 port 3
> >uhub4: Dell product 0xa001, rev 2.00/0.00, addr 2
> >uhub4: 2 ports with 2 removable, self powered, multiple transaction
> >translators
> >dkcsum: sd0 matches BIOS drive 0x80
> >root on sd0a
> >rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
>
> ***** end dmesg i386.SMP ******
>
--
paranoic mickey (my employers have changed but, the name has remained)
