Gidday...
Anyone out there running 3.9 on a Toshiba Tecra 8000 ? Im trying to get it to
run at 1024x768 but its being grumpy.
Dmesg for good measure:
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 233 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 167288832 (163368K)
avail mem = 145674240 (142260K)
using 2067 buffers containing 8466432 bytes (8268K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(63) BIOS, date 12/30/99
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 26%
apm0: AC on, battery charge low, charging, estimated 0:37 hours
apm0: flags 20102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xc000 0xe8000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
vga1 at pci0 dev 4 function 0 "Neomagic Magicgraph NM2200" rev 0x12
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2030AT>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 7.5A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 5 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
admtemp0 at iic0 addr 0x4e: adm1021
"Toshiba Fast Infrared Type O" rev 0x23 at pci0 dev 9 function 0 not
configured
cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC97 CardBus" rev 0x05pci_intr_map:
no mapping for pin A
: couldn't map interrupt
cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC97 CardBus" rev 0x05pci_intr_map:
no mapping for pin B
: couldn't map interrupt
isa0 at pcib0
isadma0 at isa0
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 26%
apm0: AC on, battery charge low, charging, estimated 0:37 hours
apm0: flags 20102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xc000 0xe8000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x02
vga1 at pci0 dev 4 function 0 "Neomagic Magicgraph NM2200" rev 0x12
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2030AT>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 7.5A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 5 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
admtemp0 at iic0 addr 0x4e: adm1021
"Toshiba Fast Infrared Type O" rev 0x23 at pci0 dev 9 function 0 not
configured
cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC97 CardBus" rev 0x05pci_intr_map:
no mapping for pin A
: couldn't map interrupt
cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC97 CardBus" rev 0x05pci_intr_map:
no mapping for pin B
: couldn't map interrupt
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
audio1 at wss0
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536
pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
ne3 at pcmcia1 function 0 "Dual Speed, 10/100 PC Card, 1.0" port 0x340/32, irq
3, address 00:e0:98:9f:b9:b4
nsphyter0 at ne3 phy 4: DP83815 10/100 PHY, rev. 3
pcic0: irq 9, polling enabled
biomask e945 netmask e94d ttymask fbcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Thanks,
Josh
