GENERIC should it be!
On Monday 12 June 2006 14:26, John R. Shannon wrote:
> OpenBSD 3.9 stable
> NEXCOM EBSFL565 (dmesg at end of E-mail)
>
> I'm experiencing a problem with vlans on this device where
> intermittently, and occasionally the interface works, but mostly is
> inoperative. One minute I can ping a node, then I cannot. The interface
> works correctly without the vlan.
>
> # ifconfig rl2
> rl2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:10:f3:09:22:31
> media: Ethernet autoselect (none)
>
> # ifconfig vlan0
> vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:10:f3:09:22:31
> vlan: 2 priority: 0 parent interface: rl2
> groups: vlan
> inet 10.1.1.1 netmask 0xffffff00 broadcast 10.1.1.255
> # ifconfig vlan1
> vlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:10:f3:09:22:31
> vlan: 3 priority: 0 parent interface: rl2
> groups: vlan
> inet 10.2.1.1 netmask 0xffffff00 broadcast 10.2.1.255
>
> netstat shows no errors.
>
> When I use a Sokeris 4801 with the same configuration except for using
> si instead of rl everything works.
>
>
> dmesg:
>
> OpenBSD 3.9-stable (NEXCOM) #0: Mon Jun 12 04:19:37 MDT 2006
>
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/NEXCOM
> cpu0: Mobile Intel(R) Celeron(TM) CPU 650MHz ("GenuineIntel" 686-class)
> 647 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> real mem = 469282816 (458284K)
> avail mem = 425148416 (415184K)
> using 4278 buffers containing 23568384 bytes (23016K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(e8) BIOS, date 08/17/04, BIOS32 rev. 0 @ 0xfb470
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 70102 dobusy 1 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfded0/176 (9 entries)
> pcibios0: PCI Exclusive IRQs: 5 10 11 12
> pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0xf400 0xd0000/0x8000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "VIA VT8623 PCI" rev 0x00
> ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga0 at pci1 dev 0 function 0 "VIA CLE266" rev 0x03: aperture at
> 0xe4000000, size 0x10000000
> wsdisplay0 at vga0: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> rl0 at pci0 dev 9 function 0 "Realtek 8139" rev 0x20: irq 11, address
> 00:10:f3:09:22:33
> rlphy0 at rl0 phy 0: RTL internal PHY
> rl1 at pci0 dev 10 function 0 "Realtek 8139" rev 0x20: irq 5, address
> 00:10:f3:09:22:32
> rlphy1 at rl1 phy 0: RTL internal PHY
> rl2 at pci0 dev 11 function 0 "Realtek 8139" rev 0x20: irq 12, address
> 00:10:f3:09:22:31
> rlphy2 at rl2 phy 0: RTL internal PHY
> rl3 at pci0 dev 12 function 0 "Realtek 8139" rev 0x20: irq 10, address
> 00:10:f3:09:22:30
> rlphy3 at rl3 phy 0: RTL internal PHY
> uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 5
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 12
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 10
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
> iic0 at viapm0
> "unknown" at iic0 addr 0x18 not configured
> pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <M-Systems iDOC V1.10>
> wd0: 1-sector PIO, LBA, 250MB, 512000 sectors
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 disabled (no drives)
> auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 12
> ac97: codec id 0x49434552 (ICEnsemble VIA VT1616i)
> ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
> audio0 at auvia0
> isa0 at mainbus0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> midi0 at pcppi0: <PC speaker>
> lpt0 at isa0 port 0x378/4 irq 7
> lm0 at isa0 port 0x290/8: W83627HF
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> biomask ff65 netmask ff65 ttymask ffe7
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
