Hi,
since upgrading from 3.8 to 3.9, my firewall (which has one Netgear
FA311v1) from time to time spews this:
May 31 13:46:33 gryphon /bsd: sis0: watchdog timeout
Jun 2 20:31:11 gryphon /bsd: sis0: watchdog timeout
Jun 2 22:25:12 gryphon /bsd: sis0: watchdog timeout
Jun 3 15:40:17 gryphon /bsd: sis0: watchdog timeout
Jun 6 11:55:47 gryphon /bsd: sis0: watchdog timeout
Jun 7 17:32:55 gryphon /bsd: sis0: watchdog timeout
Jun 7 19:51:59 gryphon /bsd: sis0: watchdog timeout
Jun 15 15:43:57 gryphon /bsd: sis0: watchdog timeout
Jun 20 13:05:19 gryphon /bsd: sis0: watchdog timeout
I haven't noticed any other problems and since swapped the card with
another FA311v1 (bought at the same time, but a different board
revision :-() without success. The machine had been running 3.8
without these messages for some months, and I upgraded to 3.9 on
05-29, so I'm reasonably sure that the cards are not the problem.
Have there been any changes in the sis driver that cause these
messages to appear in 3.9 but not 3.8? And do I have to be worried or
is it a driver bug?
Here's the ob dmesg:
OpenBSD 3.9-stable (GENERIC) #0: Sun May 28 22:13:18 CEST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD-K6(tm) 3D+ Processor ("AuthenticAMD" 586-class) 401 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem = 133799936 (130664K)
avail mem = 115363840 (112660K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(12) BIOS, date 04/12/00, BIOS32 rev. 0 @ 0xfb380
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xb808
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdde0/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C598 PCI" rev 0x04
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 AGP" rev 0x00
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "VIA VT82C596A ISA" rev 0x23
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x10: ATA66,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <ST340016A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
pciide0:1:0: device timeout waiting to send SCSI packet
cd0 at scsibus0 targ 0 lun 0: <BCD 24XM, CD-ROM, U2.1> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x11: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"VIA VT82C596 Power" rev 0x30 at pci0 dev 7 function 3 not configured
vga1 at pci0 dev 18 function 0 "Cirrus Logic CL-GD5434-8" rev 0xf9
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
sis0 at pci0 dev 19 function 0 "NS DP83815 10/100" rev 0x00, DP83815D:
irq 10, address 00:40:f4:51:4b:43
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
rl0 at pci0 dev 20 function 0 "Realtek 8139" rev 0x10: irq 12, address
00:14:6c:76:32:32
rlphy0 at rl0 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask eb65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
/var/squid: optimization changed from TIME to SPACE
sis0: watchdog timeout
sis0: watchdog timeout
Best
Martin
