On 07/07/06, Peter Philipp <[EMAIL PROTECTED]> wrote:
>
> On Thu, Jul 06, 2006 at 09:02:47PM -0500, Jacob Yocom-Piatt wrote:
> > (1) i have 2 blocks of 8 static IPs at my disposal, one at home and one
> at work,
>
> So two /29's ?
>
> > and both connections are 3Mb/512Kb ADSL via PPPoE. the upstream traffic
> at work
> > is beginning to saturate the connection and i would like to share some
> of the
> > load with the home connection. would BGP allow me to multihome a site
> across
> > both connections to split the load?
> >
> > would i need an AS number if this would work?
>
> Yup.  That's not all.  You need at least a /20 (AFAIK) to be able for
> large
> backbones to even consider routing your advertisement.  But this was
> heresay
> years ago, I don't know if it still holds.  The investment though is in
> the
> thousands of dollars a year though (ARIN fees
> http://www.arin.net/billing/fee_schedule.html) and you have to justify
> using that much IP space.


/24 work fine across the net. Smaller than that will likely be filtered in
lots of places.

You need an AS of your own and provider independent addresses to
multihome properly. If both links go to the same provider and they're
flexible
you may be able to implement a bgp setup with your /29's and without an AS
of your own.

In the end complexity and cost of running a bgp setup will hurt a lot more
than just upgrading your bandwidth. With BGP you can connect to multiple
providers, and also inheret problems from all of them.


> (2) are there any particular online docs that are recommended reading for
> BGP?
> RFC's, NANOG archives perhaps too



Goto Cisco's website and dig around, they have lots of good documentation
regarding most flavors of ip routing.
http://www.cisco.com/en/US/products/ps6599/products_white_paper09186a00804fa120.shtml#wp4050

http://www.cisco.com/en/US/tech/tk365/tk80/tsd_technology_support_sub-protocol_home.html



> what about books?
> >


Internet Routing Architetures by Sam Halabi.
2nd edition for $39 on amazon.

> (3) the home gateway machine is a PII-350 w/ 64MB ram. is this too slow
> for
> > doing what i have asked about in (1)?


With more memory it could in theory do what you want,
but in reality BGP is not the tool to use to when you run out
bandwidth on your 0.5M dsl line.

/Tony

-- 
Tony Sarendal - [EMAIL PROTECTED]
IP/Unix

       -= The scorpion replied,
               "I couldn't help it, it's my nature" =-

Reply via email to