On Sat, 2 Sep 2006, Jason George wrote:
> I have an older dual P3-800 Compaq DL360 that I'm planning on using as a test
> platform for Anil's Xen work. It panicked earlier this week while booting the
> Aug 30 snapshot install kernel (first dmesg below).
>
> In private email, Theo gave me the standard PCIBIOS/MPBIOS rant and mentioned
> Portugal (enough said, you know who you are...)
>
> I ran the SmartStart CD and re-enabled the onboard SCSI (the ciss RAID card
> was removed before I got ahold of the machine) and was able to install the Sep
> 1 snapshot.
>
> Interestingly, the MP kernel does not see the second processor, even though
> the BIOS detects it on power up (second dmesg below).
>
> Given the closing window as we approach 4.0, I'm not expecting anything to be
> addressed in an immediate manner in regards to the multiprocessor end of
> things.
>
> What may be of more immediate interest are the clock adjustments below... note
> the jumps between ~13700s and ~2100s:
How large is the "real" offset? What happens if you set the time
yourself to a value reasonable close to the actual value?
-Otto
>
> $ cat /var/log/daemon
> Sep 2 12:33:47 dl360-800 ntpd[30690]: ntp engine ready
> Sep 2 12:33:48 dl360-800 savecore: no core dump
> Sep 2 12:34:09 dl360-800 ntpd[30690]: peer 24.130.207.189 now valid
> Sep 2 12:36:39 dl360-800 ntpd[12524]: ntp engine ready
> Sep 2 12:36:39 dl360-800 savecore: no core dump
> Sep 2 12:36:59 dl360-800 ntpd[12524]: peer 216.239.80.163 now valid
> Sep 2 12:37:55 dl360-800 ntpd[11652]: adjusting local clock by 13785.719230s
> Sep 2 12:41:16 dl360-800 ntpd[11652]: adjusting local clock by 2139.749345s
> Sep 2 12:42:21 dl360-800 ntpd[11652]: adjusting local clock by 13775.507384s
> Sep 2 12:44:04 dl360-800 ntpd[11652]: adjusting local clock by 2143.520959s
> Sep 2 12:46:53 dl360-800 ntpd[11652]: adjusting local clock by 13765.050606s
> Sep 2 12:47:28 dl360-800 ntpd[11652]: adjusting local clock by 2146.171145s
> Sep 2 12:49:08 dl360-800 ntpd[11652]: adjusting local clock by 13759.905097s
> Sep 2 12:52:59 dl360-800 ntpd[11652]: adjusting local clock by 13751.010840s
> Sep 2 12:54:09 dl360-800 ntpd[11652]: adjusting local clock by 2144.801233s
> Sep 2 12:54:44 dl360-800 ntpd[11652]: adjusting local clock by 13746.983945s
> Sep 2 12:58:31 dl360-800 ntpd[11652]: adjusting local clock by 13738.295899s
> Sep 2 13:01:19 dl360-800 ntpd[11652]: adjusting local clock by 2140.996292s
> Sep 2 13:02:28 dl360-800 ntpd[11652]: adjusting local clock by 13729.183509s
> Sep 2 13:06:55 dl360-800 ntpd[11652]: adjusting local clock by 13718.932625s
> Sep 2 13:09:11 dl360-800 ntpd[11652]: adjusting local clock by 2142.278127s
> Sep 2 13:10:17 dl360-800 ntpd[11652]: adjusting local clock by 13711.182821s
> Sep 2 13:14:43 dl360-800 ntpd[11652]: adjusting local clock by 13700.970419s
> Sep 2 13:16:59 dl360-800 ntpd[11652]: adjusting local clock by 13695.774769s
> $
>
>
> If any developers are interested in commenting or want more information, drop
> me a note. This isn't a priority or showstopper for me and I have enough to
> do with Real Life and 4.0 prep while Theo is out of town, but if anyone wants
> to take a stab, let me know...
>
> Thanks!
>
> --Jason
>
>
>
>
> dmesg #1:
>
> boot> boot /4.0/i386/bsd.rd
> booting cd0a:/4.0/i386/bsd.rd: 4692500+739940 [52+164128+149970]=0x57b114
> entry point at 0x200120
>
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2006 OpenBSD. All rights reserved. http://www.OpenBSD.org
>
> OpenBSD 4.0 (RAMDISK_CD) #33: Wed Aug 30 13:39:12 MDT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 798 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
> FXSR,SSE
> real mem = 402206720 (392780K)
> avail mem = 360169472 (351728K)
> using 4256 buffers containing 20213760 bytes (19740K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000,
> SMBIOS rev. 2.3 @ 0xf206c (23 entries)
> bios0: Compaq ProLiant DL360
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> pcibios0: PCI BIOS has 6 Interrupt Routing table entries
> pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xe8000/0x6000 0xee000/0x2000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
> pci1 at pchb1 bus 3
> fxp0 at pci1 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: irq 10,
> address 00:50:8b:e0:36:4a
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> fxp1 at pci1 dev 5 function 0 "Intel 8255x" rev 0x08, i82559: irq 11,
> address 00:50:8b:e0:45:e5
> inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
> siop0 at pci0 dev 1 function 0 "Symbios Logic 53c1510D" rev
> 0x02pci_intr_map: no mapping for pin A
> : couldn't map interrupt
> extent_free: start 0x18000000, end 0x180000ff
> panic: extent_free: region not found
>
> The operating system has halted.
> Please press any key to reboot.
>
>
> dmesg #2:
>
> $ dmesg
> OpenBSD 4.0 (GENERIC.MP) #933: Fri Sep 1 12:06:05 MDT 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 798 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXS
> R,SSE
> real mem = 670642176 (654924K)
> avail mem = 602988544 (588856K)
> using 4256 buffers containing 33636352 bytes (32848K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000,
> SMB
> IOS rev. 2.3 @ 0xf206c (23 entries)
> bios0: Compaq ProLiant DL360
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> pcibios0: PCI BIOS has 6 Interrupt Routing table entries
> pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xe8000/0x6000 0xee000/0x2000!
> cpu0 at mainbus0: (uniprocessor)
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 798 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXS
> R,SSE
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
> pci1 at pchb1 bus 3
> fxp0 at pci1 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: irq 10, address
> 00
> :50:8b:e0:36:4a
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> fxp1 at pci1 dev 5 function 0 "Intel 8255x" rev 0x08, i82559: irq 11, address
> 00
> :50:8b:e0:45:e5
> inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
> siop0 at pci0 dev 1 function 0 "Symbios Logic 53c1510D" rev 0x02: irq 5, using
> 4
> K of on-board RAM
> scsibus0 at siop0: 16 targets
> siop1 at pci0 dev 1 function 1 "Symbios Logic 53c1510D" rev 0x02: irq 3, using
> 4
> K of on-board RAM
> scsibus1 at siop1: 16 targets
> sd0 at scsibus1 targ 1 lun 0: <SEAGATE, ST336704LSUN36G, 0326> SCSI3 0/direct
> fi
> xed
> sd0: 34732MB, 24622 cyl, 27 head, 107 sec, 512 bytes/sec, 71132959 sec total
> vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
> piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x4f: SMBus disabled
> pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus2 at atapiscsi0: 2 targets
> cd0 at scsibus2 targ 0 lun 0: <COMPAQ, CD-ROM CRN-8241B, 2.23> SCSI0 5/cdrom
> rem
> ovable
> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
> isa0 at mainbus0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask f3ed netmask ffed ttymask ffef
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> siop1: target 1 now using tagged 16 bit 40.0 MHz 31 REQ/ACK offset xfers
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
