Hello,
I'm using OB3.9 release version, and X.org plus fvwm2, after start X
windows, what I got is my LCD monitor repeat black screen between several
minutes, even there have keyboard and mouse movement. after black screen, I
can ctrl+alt+F1 then ctrl_alt+F5 to switch back screen. keyboard and mouse
still can respond when black. I even disable DPMS and xscreensave, it still
repeat.
is this a LCD HW problem? but not happen in winxp installed same PC. LCD is
a ViewSonic 903b.
Thanks in advence.
follow is dmesg and xset q output.
********dmesg**********
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1700+ ("AuthenticAMD" 686-class, 256KB L2 cache)
1.48 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu0: AMD Powernow: TS
real mem = 804823040 (785960K)
avail mem = 726990848 (709952K)
using 4278 buffers containing 40345600 bytes (39400K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e0) BIOS, date 01/14/03, BIOS32 rev. 0 @ 0xf9b60
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc604
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc580/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 6 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8235 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xec00
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 440" rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:e0:4c:93:7f:f1
rlphy0 at rl0 phy 0: RTL internal PHY
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 6
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
"unknown" at iic0 addr 0x18 not configured
maxtmp0 at iic0 addr 0x4c: lm90
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST380021A>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 31536H2>
wd1: 16-sector PIO, LBA, 14324MB, 29336832 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TECLAST, 52 CD-ROM, 0.3E> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 6
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auvia0
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ef65 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
wd0a: aborted command, interface CRC error reading fsbn 128 of 128-143 (wd0
bn 86044268; cn 85361 tn 6 sn 2), retrying
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
wd0a: aborted command, interface CRC error reading fsbn 128 of 128-143 (wd0
bn 86044268; cn 85361 tn 6 sn 2), retrying
wd0: soft error (corrected)
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
wd0g: aborted command, interface CRC error writing fsbn 16 of 16-19 (wd0 bn
127183408; cn 126174 tn 0 sn 16), retrying
wd0: soft error (corrected)
*******xset q*********
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000000
auto repeat delay: 500 repeat rate: 30
auto repeating keys: 00ffffffdffffbbf
fadfffdfffdfe5ef
ffffffffffffffff
ffffffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: no allow exposures: yes
timeout: 0 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0 WhitePixel: 16777215
Font Path:
/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/myfonts/,/usr/local/lib/X11/fonts/ghostscript/,/usr/local/lib/X11/fonts/mscorefonts/
Bug Mode: compatibility mode is disabled
DPMS (Energy Star):
Standby: 1200 Suspend: 1800 Off: 2400
DPMS is Disabled
File paths:
Config file: /etc/X11/xorg.conf
Modules path: /usr/X11R6/lib/modules
Log file: /var/log/Xorg.0.log
