On Wed, Nov 29, 2006 at 08:27:14AM +0100, Damien Bergamini wrote:
> You must recompile user ppp with ATM enabled:
>
> cd /usr/src/usr.sbin/ppp/ppp/
> vi Makefile
> remove line NOATM= /usr/include/netnatm required
> then run make && make install
>
> then ppp -dedicated adsl
>
> this is explained here:
> http://damien.bergamini.free.fr/ueagle/ppp.html
> (just skip the "synchronizing the modem" section
> which is outdated).
>
hi,
i'm also having some difficulties in making my sagem fast 800 e2t work,
i'm running a generic kernel with ueagle and noatm enabled (dmesg below),
recompiled ppp (as you mentioned above, since i'm using pppoa) and after
booting the machine the modem doesn't synchronize.. running ppp -dedicated adsl
in that state (ppp.conf from your page, with vpi and vci set to 0 35) shows:
Warning: PPPoA:ueagle0:0.35: connect: Device not configured
Warning: deflink: Device (PPPoA:ueagle0:0.35) must begin with a '/', a '!' or
contain at least one ':'
Warning: PPPoA:ueagle0:0.35: connect: Device not configured
Warning: deflink: Device (PPPoA:ueagle0:0.35) must begin with a '/', a '!' or
contain at least one ':'
in 30sec. intervals (till i kill ppp), the power led on the modem is on, but
the other one (sync) is still off.. is there something that can be done to
make this modem work?
cheers,
my dmesg:
OpenBSD 4.0-current (UEAGLE) #0: Wed Nov 29 10:49:03 CET 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/UEAGLE
cpu0: Intel(R) Celeron(R) M processor 1.40GHz ("GenuineIntel" 686-class) 1.40
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 526872576 (514524K)
avail mem = 472522752 (461448K)
using 4256 buffers containing 26468352 bytes (25848K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(e8) BIOS, date 08/21/06, BIOS32 rev. 0 @ 0xfd740,
SMBIOS rev. 2.33 @ 0xe0010 (53 entries)
bios0: IBM 1834S5G
pcibios0 at bios0: rev 2.1 @ 0xfd6d0/0x930
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xd000! 0xcd000/0x1000 0xce000/0x1000 0xdc000/0x4000!
0xe0000/0x10000
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xe0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 2
cbb0 at pci1 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: irq 11
iwi0 at pci1 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 11,
address 00:12:f0:f1:25:08
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x81, i82562: irq 11,
address 00:0a:e4:37:7c:d8
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS541040G9AT00>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4080N, 0X21> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4
AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ueagle0 at uhub1 port 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
ueagle0: at uhub1 port 2 (addr 2) disconnected
ueagle0 detached
ueagle0 at uhub1 port 2
ueagle0: Analog Devices Eagle II, rev 1.00/50.0b, addr 2
ueagle0: address: 00:60:4c:3b:86:3d
--
Przemyslaw Nowaczyk <[EMAIL PROTECTED]>
CS student @ Poznan University of Technology
http://unixlab.cs.put.poznan.pl/~inf73015/
