I've got an Atheros AR5213 card that I'm trying to use in a wireless
access point. Unfortunately, it's experienced a number of odd issues,
including device timeouts, inability to associate properly with an
existing Prism-based access point running on OpenBSD 3.7, etc.
I'm not going to go too heavily into the details of my problems,
because I see from very recent posts to the list that support for this
particular device is not fully functional (or at least was not as of
the last couple of months). What I really want to know is, are these
devices fully supported yet? If not, what stands in the way of full
support? If it's not properly supported yet, does anyone have
recommendations for a good, reasonably cheap wireless card that will
work as an access point?
Here's my full dmesg:
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 3000+ ("AuthenticAMD" 686-class,
512KB L2 cache) 2.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
cpu0: Cool`n'Quiet K8 2010 Mhz: speeds: 2000 1800 1000 Mhz
real mem = 267939840 (261660K)
avail mem = 236662784 (231116K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c6) BIOS, date 08/26/05, BIOS32 rev. 0 @
0xfba60, SMBIOS rev. 2.3 @ 0xf0000 (34 entries)
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde90/240 (13 entries)
pcibios0: PCI Exclusive IRQs: 3 5 10 11 12
pcibios0: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce3 250 PCI Host" rev 0xa1
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce3 250 ISA" rev 0xa2
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce3 250 SMBus" rev 0xa1
iic0 at nviic0
iic1 at nviic0
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce3 250 USB" rev 0xa1: irq
3, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1 at pci0 dev 2 function 1 "NVIDIA nForce3 250 USB" rev 0xa1: irq
3, version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 2 function 2 "NVIDIA nForce3 250 USB2" rev 0xa2: irq 3
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
nfe0 at pci0 dev 5 function 0 "NVIDIA nForce3 LAN" rev 0xa2: irq 10,
address 00:16:ec:29:7c:ec
rlphy0 at nfe0 phy 9: RTL8201L 10/100 PHY, rev. 1
auich0 at pci0 dev 6 function 0 "NVIDIA nForce3 250 AC97" rev 0xa1: irq
3, nForce3 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auich0
pciide0 at pci0 dev 8 function 0 "NVIDIA nForce3 250 IDE" rev 0xa2:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <ST38410A>
wd0: 32-sector PIO, LBA, 8223MB, 16841664 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-R/RW SW-252F, R806> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 10 function 0 "NVIDIA nForce3 250 SATA" rev 0xa2: DMA
pciide1: using irq 11 for native-PCI interrupt
ppb0 at pci0 dev 11 function 0 "NVIDIA nForce3 250 AGP" rev 0xa2
pci1 at ppb0 bus 1
ppb1 at pci0 dev 14 function 0 "NVIDIA nForce3 250 PCI-PCI" rev 0xa2
pci2 at ppb1 bus 2
ath0 at pci2 dev 6 function 0 "Atheros AR5212" rev 0x01: irq 12
ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, FCC1A, address
00:0c:41:16:cb:d4
vga1 at pci2 dev 7 function 0 "S3 ViRGE DX/GX" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask eb6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
