Good day,
What do I have to do to get info about a raid array on a HP DL380 G4 with
bioctl? Is this supported?
# bioctl -v -h ciss0
bioctl: Can't locate ciss0 device via /dev/bio
man 8 biosctl says "RAID device drivers which support management functionality
can register their services with the bio(4) driver". man 4 bio says "Only
drivers which have registered with the bio device can be accessed via this
interface." but does not explain how to register a driver.
Part of dmesg below . ..
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Xeon(TM) CPU 3.80GHz ("GenuineIntel" 686-class) 3.81 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,
TM2,CNXT-ID,CX16
.
.
.
ciss0 at pci3 dev 3 function 0 "Compaq Smart Array 64xx" rev 0x01: irq 5
ciss0: 2 LDs, HW rev 1, FW 2.58/2.58
scsibus0 at ciss0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.58> SCSI0 0/direct fixed
sd0: 286095MB, 286095 cyl, 64 head, 32 sec, 512 bytes/sec, 585922680 sec total
sd1 at scsibus0 targ 1 lun 0: <HP, LOGICAL VOLUME, 2.58> SCSI0 0/direct fixed
sd1: 858293MB, 858293 cyl, 64 head, 32 sec, 512 bytes/sec, 1757784604 sec
total
Any clues will be greatly appreciated.
Thanks very much,
Vijay
--
Vijay Sankar
ForeTell Technologies Limited
59 Flamingo Avenue, Winnipeg, MB, Canada R3J 0X6
Phone: +1 (204) 885-9535, E-Mail: [EMAIL PROTECTED]
