On Mon, 11 Jun 2007, Josh Grosse wrote:
> Running i386-current with a 26-May build everything is fine. I just built
> a new kernel today, and got:
>
> WARNING: raid0: end of partition `a' exceeds the size of raid (69206144)
> WARNING: raid0: end of partition `e' exceeds the size of raid (69206144)
>
> And then dropped into ddb, since it cannot find raid0a. I assume this is
> due to recent disklabel changes.
Please contact krw@, he has been searching testers for RAIDframe root
autoconfig on [EMAIL PROTECTED] There's even a diff posted there, iirc.
-Otto
>
> The disklabel is correct, and if I use a non-RAID boot drive, raid0a can
> be mounted without trouble.
> --------------------------
> # /dev/rraid0c:
> type: RAID
> disk: raid
> label: fictitious
> flags:
> bytes/sector: 512
> sectors/track: 128
> tracks/cylinder: 8
> sectors/cylinder: 1024
> cylinders: 67584
> total sectors: 69206144
> rpm: 3600
> interleave: 1
> trackskew: 0
> cylinderskew: 0
> headswitch: 0 # microseconds
> track-to-track seek: 0 # microseconds
> drivedata: 0
>
> 16 partitions:
> # size offset fstype [fsize bsize cpg]
> a: 204737 63 4.2BSD 2048 16384 1 # Cyl 0*-
> 199
> c: 69206144 0 unused 0 0 # Cyl 0 -
> 67584*
> d: 2097152 204800 4.2BSD 0 0 323 # Cyl 200 -
> 2247
> e: 20971520 2301952 4.2BSD 2048 16384 1 # Cyl 2248 -
> 22727
> f: 45932672 23273472 4.2BSD 0 0 323 # Cyl 22728 -
> 67584*
> --------------------------
> include "/usr/src/sys/arch/i386/conf/GENERIC"
> pseudo-device raid 4
> option RAID_AUTOCONFIG
> makeoptions DEBUG="-g"
> config bsdraid root on wd0a swap on wd0b
> --------------------------
> OpenBSD 4.1-current (JGGIMI) #41: Mon Jun 11 12:02:28 EDT 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/JGGIMI
> cpu0: AMD Sempron(tm) 2600+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.84
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> real mem = 502820864 (479MB)
> avail mem = 476368896 (454MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 01/07/05, BIOS32 rev. 0 @ 0xfb9b0,
> SMBIOS rev. 2.2 @ 0xf0000 (44 entries)
> bios0: ASUS A7VT
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 70102 dobusy 1 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xda84
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfda10/112 (5 entries)
> pcibios0: PCI Exclusive IRQs: 3 5 10 11
> pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x7e00 0xc8000/0x8000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "VIA VT8378 PCI" rev 0x00
> ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "VIA VT8378 VGA" rev 0x01: aperture at
> 0xe4000000, size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> dc0 at pci0 dev 8 function 0 "Lite-On PNIC-II" rev 0x25: irq 10, address
> 00:a0:cc:e3:42:d6
> dcphy0 at dc0 phy 31: internal PHY
> uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
> uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 10
> uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 5
> ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 3
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0: VIA EHCI root hub, rev 2.00/1.00, addr 1
> viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
> iic0 at viapm0
> pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
> channel 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <ExcelStor Technology J880>
> wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <LITE-ON, DVDRW SHW-160P6S, PS01> SCSI0 5/cdrom
> removable
> wd1 at pciide0 channel 1 drive 1: <Maxtor 6Y080P0>
> wd1: 16-sector PIO, LBA, 78167MB, 160086528 sectors
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
> wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 6
> auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 5
> ac97: codec id 0x41445368 (Analog Devices AD1888)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auvia0
> vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address
> 00:11:2f:85:b1:90
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
> 0x004063, model 0x0032
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1: VIA UHCI root hub, rev 1.00/1.00, addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2: VIA UHCI root hub, rev 1.00/1.00, addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3: VIA UHCI root hub, rev 1.00/1.00, addr 1
> isa0 at mainbus0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> lm0 at isa0 port 0x290/8: W83697HF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ff6d netmask ff6d ttymask ffef
> pctr: user-level cycle counter enabled
> mtrr: Pentium Pro MTRR support
> Kernelized RAIDframe activated
> cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
> SENSE KEY: Not Ready
> ASC/ASCQ: Medium Not Present
> raid0 at root: (RAID Level 1) total number of sectors is 69206144 (33792 MB)
> as root
> raid1 at root: (RAID Level 1) total number of sectors is 3805056 (1857 MB)
> uhidev0 at uhub1 port 1 configuration 1 interface 0
> uhidev0: vendor 0x062a product 0x0000, rev 1.10/0.00, addr 2, iclass 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> softraid0 at root
> WARNING: raid0: end of partition `a' exceeds the size of raid (69206144)
> WARNING: raid0: end of partition `e' exceeds the size of raid (69206144)
> dkcsum: wd0 matches BIOS drive 0x80
> dkcsum: wd1 matches BIOS drive 0x81
> root device (default wd0a): wd0f
> swap device (default wd0b):
> root on wd0f swap on wd0b dump on wd0b
> WARNING: raid0: end of partition `a' exceeds the size of raid (69206144)
> WARNING: raid0: end of partition `e' exceeds the size of raid (69206144)
> Stopped at Debugger+0x4: leave
> ddb>
