I've got a TI PCI7XX1 based card reader and an MMC card, which was
formatted by and used in Nokia 7710 phone.
When I insert a card I get following messages to dmesg:
sd1 at scsibus2 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 490MB, 490 cyl, 64 head, 32 sec, 512 bytes/sec, 1003520 sec total
disklabel says:
# /dev/rsd1c:
type: SCSI
disk: SCSI disk
label: Drive #01
flags:
bytes/sector: 512
sectors/track: 32
tracks/cylinder: 64
sectors/cylinder: 2048
cylinders: 490
total sectors: 1003520
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
c: 1003520 0 unused 0 0 # Cyl 0 - 489
fdisk:
fdisk: sysctl(machdep.bios.diskinfo): Device not configured
Disk: sd1 geometry: 490/64/32 [1003520 Sectors]
Offset: 0 Signature: 0xAA55
Starting Ending LBA Info:
#: id C H S - C H S [ start: size ]
------------------------------------------------------------------------
0: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
What cam be done?
--
.0.
..0
000
