maybe as cc to the list.
regards,
joerg
*On Don Aug 9 15:18 , Gregory Edigarov sent:
*
Just want to make a confirmation with two other providers. Also I
observe this behavior with both pppoe(4) and pppoe(8).
Umaxx wrote:
> resend, since stupid webmailer killed linebreaks:
>
>
>
> hi,
>
> after upgrading my router to -current the dsl pppoe connection
does not work
> anymore.
> userland ppp connects fine but freezes after K 30 seconds.
freeze means the
> connection is still there no errors shown in logs and ifconfig
state is normal
> but there is no more incoming traffic. the provider and modem
hardware is ok
> since i'm connected now through a netscreen to write this mail.
i changed
> nothing
> in ppp configuration since years and disabled pf for testing...
same problem.
> as i can see in source changes: not much has changed in userland
ppp and nfe
> code
> since 4.1.
>
> i read in some forums that it would be better to user kernel
pppoe...
> so i tried to use kernel pppoe as workaround, but its does not
connect. i used
> following configuration in /etc/hostname.pppoe0:
>
> inet 0.0.0.0 255.255.255.255 0.0.0.1 pppoedev nfe1 \
> authproto pap authname **** authkey **** up
> !/sbin/route add default 0.0.0.1
>
> and of course: "up" in /etc/hostname.nfe1
>
> if i enable debug i see a lot of outgoing packages... and then a
timeout after
> a
> while. reconnect and again the same...
> it stays in the sppp phase of "establish connection using pap
authname ****"
>
> I'm located in germany using arcor as provider.
> anyone else using dsl pppoe (kernel/userland) in current or
latest snapshots -
> maybe in germany with arcor?
>
> any hints are really welcome.
> dmesg follows....
>
> regards,
>
> joerg
>
> OpenBSD 4.2 (GENERIC.MP) #0: Wed Aug 8 17:31:49 CEST 2007
> [EMAIL PROTECTED]
<javascript:top.opencompose('[EMAIL
PROTECTED]','','','')>:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 2145972224 (2046MB)
> avail mem = 2072682496 (1976MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0000 (78 entries)
> bios0: vendor Phoenix Technologies, LTD version "ASUS M2N32-SLI
DELUXE ACPI
> BIOS
> Revision 0603" date 06/27/2006
> bios0: ASUSTeK Computer INC. M2N32-SLI DELUXE
> acpi0 at mainbus0: rev 0
> acpi0: tables DSDT FACP SSDT MCFG APIC
> acpitimer at acpi0 not configured
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2411.34 MHz
> cpu0:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache,
512KB 64b/line
> 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
> cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully
associative
> cpu0: apic clock running at 200MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+, 2410.98 MHz
> cpu1:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache,
512KB 64b/line
> 16-way L2 cache
> cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
> cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully
associative
> ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 5 (HUB0)
> acpicpu at acpi0 not configured
> acpicpu at acpi0 not configured
> acpitz at acpi0 not configured
> acpibtn at acpi0 not configured
> cpu0: PowerNow! K8 2410 MHz: speeds: 2400 2200 2000 1800 1000 MHz
> pci0 at mainbus0 bus 0: configuration mode 1
> "NVIDIA C51 Host" rev 0xa2 at pci0 dev 0 function 0 not configured
> "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 1 not configured
> "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 2 not configured
> "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 3 not configured
> "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 4 not configured
> "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 5 not configured
> "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 6 not configured
> "NVIDIA C51 Memory" rev 0xa2 at pci0 dev 0 function 7 not configured
> ppb0 at pci0 dev 3 function 0 "NVIDIA C51 PCIE" rev 0xa1
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 4 function 0 "NVIDIA C51 PCIE" rev 0xa1
> pci2 at ppb1 bus 2
> ppb2 at pci2 dev 0 function 0 "Intel IOP332 PCIE-PCIX" rev 0x07
> pci3 at ppb2 bus 3
> arc0 at pci3 dev 14 function 0 "Areca ARC-1210" rev 0x00: apic 2
int 11 (irq
> 11)
> arc0: 4 SATA Ports, 256MB SDRAM, FW Version: V1.42 2006-10-13
> scsibus0 at arc0: 16 targets
> sd0 at scsibus0 targ 0 lun 0: SCSI3 0/direct
> fixed
> sd0: 476837MB, 56514 cyl, 36 head, 480 sec, 512 bytes/sec,
976562176 sec total
> ppb3 at pci2 dev 0 function 2 "Intel IOP332 PCIE-PCIX" rev 0x07
> pci4 at ppb3 bus 4
> "NVIDIA MCP55 Memory" rev 0xa1 at pci0 dev 8 function 0 not
configured
> pcib0 at pci0 dev 9 function 0 "NVIDIA MCP55 ISA" rev 0xa2
> nviic0 at pci0 dev 9 function 1 "NVIDIA MCP55 SMBus" rev 0xa2
> iic0 at nviic0
> adt0 at iic0 addr 0x2e: adt7475 rev 0x69
> iic1 at nviic0
> iic1: addr 0x18 00=f0 01=00 02=00 03=f0 04=00 05=00 06=00 07=00
08=00 09=10
> 10=08
> 11=00 12=00 13=0a 14=00 15=00 16=00 17=34 20=95 21=92 22=00 32=00
> "NVIDIA MCP55 Memory" rev 0xa2 at pci0 dev 9 function 2 not
configured
> ohci0 at pci0 dev 10 function 0 "NVIDIA MCP55 USB" rev 0xa1:
apic 2 int 7 (irq
> 7), version 1.0, legacy support
> ehci0 at pci0 dev 10 function 1 "NVIDIA MCP55 USB" rev 0xa2:
apic 2 int 10
> (irq 10)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
> pciide0 at pci0 dev 12 function 0 "NVIDIA MCP55 IDE" rev 0xa1:
DMA, channel 0
> configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: SCSI0 5/cdrom
> removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
> pciide0: channel 1 ignored (disabled)
> pciide1 at pci0 dev 13 function 0 "NVIDIA MCP55 SATA" rev 0xa2: DMA
> pciide1: using apic 2 int 5 (irq 5) for native-PCI interrupt
> pciide2 at pci0 dev 13 function 1 "NVIDIA MCP55 SATA" rev 0xa2: DMA
> pciide2: using apic 2 int 5 (irq 5) for native-PCI interrupt
> pciide3 at pci0 dev 13 function 2 "NVIDIA MCP55 SATA" rev 0xa2: DMA
> pciide3: using apic 2 int 5 (irq 5) for native-PCI interrupt
> ppb4 at pci0 dev 14 function 0 "NVIDIA MCP55 PCI-PCI" rev 0xa2
> pci5 at ppb4 bus 5
> wi0 at pci5 dev 7 function 0 "Intersil PRISM2.5" rev 0x01: apic
2 int 10 (irq
> 10)
> wi0: PRISM2.5 ISL3874A(Mini-PCI) (0x8013), Firmware 1.0.7
(primary), 1.3.6
> (station), address 00:09:5b:2f:6b:8d
> "TI TSB43AB22 FireWire" rev 0x00 at pci5 dev 11 function 0 not
configured
> azalia0 at pci0 dev 14 function 1 "NVIDIA MCP55 HD Audio" rev
0xa2: apic 2 int
> 11
> (irq 11)
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Analog Devices/0x198b (rev. 2.0), HDA version 1.0
> audio0 at azalia0
> nfe0 at pci0 dev 16 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic
2 int 5 (irq
> 5),
> address 00:18:f3:49:aa:86
> eephy0 at nfe0 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
> nfe1 at pci0 dev 17 function 0 "NVIDIA MCP55 LAN" rev 0xa2: apic
2 int 10 (irq
> 10), address 00:18:f3:49:ad:96
> eephy1 at nfe1 phy 1: Marvell 88E1116 Gigabit PHY, rev. 1
> ppb5 at pci0 dev 18 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
> pci6 at ppb5 bus 6
> ppb6 at pci0 dev 20 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
> pci7 at ppb6 bus 7
> ppb7 at pci0 dev 22 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
> pci8 at ppb7 bus 8
> sili0 at pci8 dev 0 function 0 "CMD Technology SiI3132 SATA" rev
0x01: apic 2
> int
> 11 (irq 11)
> scsibus2 at sili0: 2 targets
> ppb8 at pci0 dev 23 function 0 "NVIDIA MCP55 PCIE" rev 0xa2
> pci9 at ppb8 bus 9
> vga1 at pci9 dev 0 function 0 "NVIDIA GeForce 7600 GT" rev 0xa1
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
> pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
> pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
> pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0:
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> intr_establish: pic ioapic0 pin 7: can't share type 3 with 2
> it0 at isa0 port 0x290/8: IT87
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
> ugen0 at uhub0 port 9
> ugen0: Realtek RTL8187, rev 2.00/1.00, addr 2
> uts0 at uhub1 port 7 configuration 1 interface 0
> uts0: eGalax Touch Panel, rev 1.10/1.00, addr 2
> wsmouse0 at uts0 mux 0
> ugen1 at uhub1 port 8
> ugen1: MConsult IRTrans USB, rev 1.10/4.00, addr 3
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a swap on sd0b dump on sd0b
>
>
>
>
>
>
> _________________________________________________________________
> versendet mit www.Oleco.de
<parse.pl?redirect=http://www.Oleco.de> Mail - Anmeldung und
Nutzung kostenlos!
> Oleco www.netlcr.de <parse.pl?redirect=http://www.netlcr.de>
jetzt auch mit SPAMSCHUTZ.
>
>
>
--
With best regards,
Gregory Edigarov
_________________________________________________________________
versendet mit www.Oleco.de Mail - Anmeldung und Nutzung kostenlos!
Oleco www.netlcr.de jetzt auch mit SPAMSCHUTZ.
