hi
i give a test on the alix with openssl speed, (see below)
i have no time to test with iperf, but a scp/sftp gimme
1.4MO/s for sending a file, and 3.3 MO/s for receiving one
the performance if the same with pf (pass in quick and pass out quick) and no
pf.
a test with less overhead protocol must be better.
OpenSSL 0.9.7j 04 May 2006
built on: date not available
options:bn(64,32) md2(int) rc4(idx,int) des(ptr,risc1,16,long) aes(partial)
blowfish(idx)
compiler: information not available
available timing options: USE_TOD HZ=100 [sysconf value]
timing function used: getrusage
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
md2 241.70k 521.53k 725.90k 813.13k 836.69k
mdc2 0.00 0.00 0.00 0.00 0.00
md4 1717.66k 6184.30k 18138.97k 35437.91k 48629.41k
md5 1523.14k 5475.53k 16318.13k 32470.44k 45382.15k
hmac(md5) 2130.63k 7323.63k 20092.91k 36169.01k 46399.49k
sha1 1403.40k 4361.82k 10298.88k 15529.66k 18337.83k
rmd160 1285.34k 3857.88k 8769.70k 12646.58k 14544.24k
rc4 22900.92k 28689.09k 30642.33k 31106.63k 31084.15k
des cbc 4860.02k 5343.06k 5517.98k 5510.81k 5526.13k
des ede3 2023.42k 2089.24k 2121.90k 2125.82k 2118.88k
idea cbc 0.00 0.00 0.00 0.00 0.00
rc2 cbc 2595.76k 2749.94k 2801.83k 2810.20k 2815.32k
rc5-32/12 cbc 0.00 0.00 0.00 0.00 0.00
blowfish cbc 6981.63k 8212.96k 8622.68k 8685.05k 8734.50k
cast cbc 6352.73k 7322.71k 7674.79k 7739.37k 7802.72k
aes-128 cbc 5871.72k 6205.27k 6328.14k 6366.70k 6367.72k
aes-192 cbc 5121.31k 5420.72k 5544.36k 5538.98k 5558.81k
aes-256 cbc 4640.51k 4839.40k 4922.88k 4945.92k 4922.33k
sign verify sign/s verify/s
rsa 512 bits 0.006537s 0.000742s 153.0 1348.2
rsa 1024 bits 0.030050s 0.001741s 33.3 574.3
rsa 2048 bits 0.170021s 0.005245s 5.9 190.6
rsa 4096 bits 1.091406s 0.017953s 0.9 55.7
sign verify sign/s verify/s
dsa 512 bits 0.004802s 0.005622s 208.2 177.9
dsa 1024 bits 0.013464s 0.016419s 74.3 60.9
dsa 2048 bits 0.044808s 0.054181s 22.3 18.5
Le Sun, 23 Sep 2007 13:33:19 +0200
earx <[EMAIL PROTECTED]> a pris sa plume:
> hi everyone
> a new toy at house :)
> a pc engines 2b2 (two lan, two usb, two mini pci..500 mhz)
> http://www.pcengines.ch/alix2b2.htm
>
> OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> RTC BIOS diagnostic error 80<clock_battery>
> cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"
> 586-class) 499 MHz cpu0:
> FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX real mem = 268009472
> (255MB) avail mem = 251506688 (239MB)
> RTC BIOS diagnostic error 80<clock_battery>
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/01/07, BIOS32 rev. 0 @
> 0xfcc1a pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: pcibios_get_intr_routing - function not supported
> pcibios0: PCI IRQ Routing information unavailable.
> pcibios0: PCI bus #0 is the last bus
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
> glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG
> AES vr0 at pci0 dev 12 function 0 "VIA VT6105M RhineIII" rev 0x96:
> irq 15, address 00:0d:b9:12:50:bc ukphy0 at vr0 phy 1: Generic IEEE
> 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr1 at
> pci0 dev 13 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
> address 00:0d:b9:12:50:bc ukphy1 at vr1 phy 1: Generic IEEE 802.3u
> media interface, rev. 3: OUI 0x004063, model 0x0034 pcib0 at pci0 dev
> 15 function 0 "AMD CS5536 ISA" rev 0x03 pciide0 at pci0 dev 15
> function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to
> compatibility, channel 1 wired to compatibility wd0 at pciide0
> channel 0 drive 0: <TRANSCEND> wd0: 1-sector PIO, LBA, 495MB, 1014048
> sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 pciide0:
> channel 1 ignored (disabled) "AMD CS5536 Audio" rev 0x01 at pci0 dev
> 15 function 3 not configured ohci0 at pci0 dev 15 function 4 "AMD
> CS5536 USB" rev 0x02: irq 9, version 1.0, legacy support ehci0 at
> pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 9 usb0 at
> ehci0: USB revision 2.0 uhub0 at usb0: AMD EHCI root hub, rev
> 2.00/1.00, addr 1 isa0 at pcib0 isadma0 at isa0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1: AMD OHCI root hub, rev 1.00/1.00, addr 1
> biomask 77ef netmask ffef ttymask ffef
> pctr: user-level cycle counter enabled
> mtrr: K6-family MTRR support (2 registers)
> nvram: invalid checksum
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a swap on wd0b dump on wd0b
> clock: unknown CMOS layout
> WARNING: clock time much less than file system time
> WARNING: using file system time
> WARNING: CHECK AND RESET THE DATE!
