The console terminal didn't respond either. I could use Ctrl-Alt-F2 to switch
consoles but the console terminal wouldn't respond at all to key strokes. I
didn't see any error messages on the console itself either. Faulty hardware or
is it lack of RAM due to the multiple apache instances?
OpenBSD 4.0-stable (GENERIC) #3: Wed Mar 14 14:13:09 CDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 266 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX
real mem = 66678784 (65116K)
avail mem = 52568064 (51336K)
using 839 buffers containing 3436544 bytes (3356K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(96) BIOS, date 08/22/99, BIOS32 rev. 0 @ 0xec800,
SMBIOS rev. 2.1 @ 0xf13e6 (54 entries)
bios0: Compaq Deskpro
pcibios0 at bios0: rev 2.1 @ 0xec800/0x3800
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6ff0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:20:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xe0000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mach64 GD" rev 0x5c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xl0 at pci0 dev 16 function 0 "3Com 3c905C 100Base-TX" rev 0x6c: irq 11,
address 00:01:02:66:8e:45
bmtphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 4
pcib0 at pci0 dev 20 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 20 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L060AVER07-0>
wd0: 16-sector PIO, LBA, 58644MB, 120103200 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <, 40X CD-ROM, 2.B1> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 20 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 20 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff45 netmask ff45 ttymask ffc7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
-------- Original-Nachricht --------
> Datum: Tue, 30 Oct 2007 13:49:46 -0500
> Von: Claus <[EMAIL PROTECTED]>
> An: [email protected]
> Betreff: Server trouble shooting
> Background:
>
> I'm running an web server with the Apache from the base install, php,
> pureftp and postgresql database to serve multiple websites. Each
> websites runs in its own instance of apache and one extra instance of
> apache is doing reverse proxy via the domain name. In all 5 independent
> apache instances are started. I've done this to separate the domains so
> that php won't be able to access the data from another domain.
>
> A simplified graphic representation:
>
> Internet
> |
> NAT Firewall (OpenBSD)
> |
> +----------------------+
> | | |
> | Apache Reverse proxy | Web Server (OpenBSD 4.0)
> | | | |
> | dom1.com dom2.com |
> +----------------------+
>
> Problem:
>
> This is the second time that after a period of time (1 to 3 months) that
> the server does not respond to http, ftp and ssh. The connection seems
> to be established but the service does not respond. Ping responds fine.
> The first time this happened the system was in the ddb>. Since I'm not
> to familiar with kernel debugging I simply restarted the system. :(
>
> Question:
>
> Instead of simply just rebooting the system I would like to start to
> learn to trouble shoot the problem. Currently I'm physically away from
> the system and can't look at the console. Since I can't connect
> successfully via ssh is there anything else I could be doing remotely?
--
GMX FreeMail: 1 GB Postfach, 5 E-Mail-Adressen, 10 Free SMS.
Alle Infos und kostenlose Anmeldung: http://www.gmx.net/de/go/freemail
