dear list-users,
i currently changed my laptop modell due to age issues. i'm
satisfied with it ("bios0: Sony Corporation VGN-FS295XP",
which is a vaio) as well as with openbsd (4.1-release
as you might notice). one problem, though, that i'm confronted
with now, is wireless lan. but this is not a question referring
to this topic. the problem is, that openbsd neither is able to work
with the builtin wlan hardware, nor with its cardbus device.while i was browsing the internet for a solution to at least one of the problems - which would be enough for me, since i own a pcmcia wlan adapter that works just fine with openbsd -, i found that the iwi0 (wlan adapter) problem was not about to be solved. indeed it seemed to me, that its crux is not even identified. (a general impression may be: http://archive.openbsd.nu/?ml=openbsd-tech&a=2006-08&t=2298124) anyway, i myself couldn't. it looks like it's a vaio specific issue, since the iwi driver (+ firmware) works for others, who don't use this (laptop) modell. so i hoped to get at least my cardbus device running. the problem with cardbus (here: cbb0) _seems_ to me to be the following: "The BIOS does not include the cardbus controllers in the PCI IRQ routing table (...)". (http://www.gratisoft.us/ftp/pub/todd/OpenBSD/srx77/cardbus.diff). "cbb0 at pci2 dev 3 function 0 "TI PCI7420 CardBus" rev 0x00pci_intr_map: no mapping for pin A" appears to match this. it existed for another (elder) modell of the vaio product line and the given address provides a "horrible hack". this hack though would suffice my needs and i guess it would be possible (for me) to reproduce this for my platform if i was to find the necessary addresses and parts of code where to fill in, of which the latter might be done by myself; the first if instructed. so the main question is, where to look/find. if other solutions should exist, i'd be happy with them though. finally, even though it's rather annoying than problematical, there is an issue with apm, which is unable to provide me with information about the battery state. output, independant of occasion, always is: "[EMAIL PROTECTED]:~ > apm Battery state: unknown, 0% remaining, 0 minutes life estimate A/C adapter state: connected Performance adjustment mode: manual (1863 MHz)". and dmesg says "(...) apm0: AC on, battery charge unknown (...)". perhaps there is a solution too, of which someone knows. however, cardbus remains important point. enclosed you find the dmesg. thank you! dominic. ______________________________________________________________________ OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERICcpu0: Intel(R) Pentium(R) M processor 1.86GHz ("GenuineIntel" 686-class) 1.87 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 535261184 (522716K) avail mem = 480694272 (469428K) using 4278 buffers containing 26886144 bytes (26256K) of memory mainbus0 (root)bios0 at mainbus0: AT/286+ BIOS, date 03/11/05, BIOS32 rev. 0 @ 0xfd6b0, SMBIOS rev. 2.34 @ 0xdc010 (17 entries)
bios0: Sony Corporation VGN-FS295XP
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd6b0/0x950
pcibios0: PCI BIOS has 16 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #7 is the last bus
bios0: ROM list: 0xc0000/0xee00! 0xdc000/0x4000! 0xe0000/0x4000!
acpi at mainbus0 not configured
cpu0 at mainbus0
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06120e2906000e29
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1867 MHz (1356 mV): speeds: 1867, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82915PM/GM PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce Go 6200" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x03: irq 11
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Realtek ALC260 (rev. 3.0), HDA version 1.0
azalia0: codec: 0x04x/0x14f1 (rev. 0.0), HDA version 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1]: No audio function groups
audio0 at azalia0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 3
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 6
cbb0 at pci2 dev 3 function 0 "TI PCI7420 CardBus" rev 0x00pci_intr_map:
no mapping for pin A
: couldn't map interrupt "TI PCI7x20 FireWire" rev 0x00 at pci2 dev 3 function 2 not configuredvendor "TI", unknown product 0xac8f (class mass storage subclass miscellaneous, rev 0x00) at pci2 dev 3 function 3 not configured iwi0 at pci2 dev 4 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 4, address 00:13:ce:19:2d:75 fxp0 at pci2 dev 8 function 0 "Intel 82801FBM LAN" rev 0x03, i82562: irq 7, address 00:01:4a:c1:06:c8
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1031GAS> wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targetscd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-K15, 1.00> SCSI0 5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 10 iic0 at ichiic0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 biomask ef6d netmask effd ttymask ffff pctr: 686-class user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 iwi0: timeout waiting for firmware initialization to complete iwi0: could not load boot firmware iwi0: timeout waiting for firmware initialization to complete iwi0: could not load boot firmware
