Ok, so I finally got around to upgrading my systems. The upgrade
process went fine on my first one, rebooted fine twice, but now it's
panicking on boot.
>> OpenBSD/i386 BOOT 3.01
boot>
booting hd0a:/bsd: 5665588+872060 [52+291168+272312]=0x6c5c70
entry point at 0x200120
Nothing more shows up in my serial console but the dump and trace are
up on my monitor if anyone needs me to transcribe it. It starts out
with:
trap: 4(0): protection fault
cn_tab=0x4a6a0
System boots fine if I interrupt the boot process and do a boot hda0:/bsd.
Dmesg:
>> OpenBSD/i386 BOOT 3.01
boot> boot hd0a:/bsd
booting hd0a:/bsd: 5665588+872060 [52+291168+272312]=0x6c5c70
entry point at 0x200120*
[ using 563904 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1800+ ("AuthenticAMD" 686-class, 256KB L2
cache) 1.54 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SSE
real mem = 267939840 (255MB)
avail mem = 251437056 (239MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/22/05, BIOS32 rev. 0 @
0xfdae0, SMBIOS rev. 2.3 @ 0xf0650 (25 entries)
bios0: vendor American Megatrends Inc. version "07.00T" date 04/02/01
bios0: ECS M848A
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf77d0/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x2200
acpi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 746 PCI" rev 0x10
ppb0 at pci0 dev 1 function 0 "SiS 86C202 VGA" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 746: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 2F040J0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <OPTORITE, CD-RW CW4002, 100E> SCSI0 5/cdrom
remov
able
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 3,
version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 5,
version 1.0, legacy support
ehci0 at pci0 dev 3 function 2 "SiS 7002 USB" rev 0x00: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: SiS EHCI root hub, rev 2.00/1.00, addr 1
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x91: irq 7,
address 00:16:ec:54:69:65
ukphy0 at sis0 phy 1: Generic IEEE 802.3u media interface, rev. 10:
OUI 0x004063, model 0x0032
wi0 at pci0 dev 9 function 0 "Intersil PRISM2.5" rev 0x01: irq 11
wi0: PRISM2.5 ISL3874A(Mini-PCI) (0x8013), Firmware 1.0.7 (primary),
1.3.6 (station), address 00:05:5d:fa:1a:75
ami0 at pci0 dev 11 function 0 "Symbios Logic MegaRAID" rev 0x01: irq 11
ami0: LSI 523, 64b/lhc, FW 712T, BIOS vG116, 64MB RAM
ami0: 1 channels, 0 FC loops, 3 logical drives
scsibus1 at ami0: 40 targets
sd0 at scsibus1 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 102400MB, 13054 cyl, 255 head, 63 sec, 512 bytes/sec, 209715200 sec
total
sd1 at scsibus1 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed
sd1: 40960MB, 5221 cyl, 255 head, 63 sec, 512 bytes/sec, 83886080 sec total
sd2 at scsibus1 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct fixed
sd2: 9263MB, 1180 cyl, 255 head, 63 sec, 512 bytes/sec, 18970624 sec total
scsibus2 at ami0: 16 targets
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: SiS OHCI root hub, rev 1.00/1.00, addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2: SiS OHCI root hub, rev 1.00/1.00, addr 1
biomask ff6d netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
uhub3 at uhub1 port 1: Texas Instruments TUSB2046 hub, rev 1.10/1.25, addr 2
uhub4 at uhub3 port 1: Mitsumi Electric Hub in Apple Extended USB
Keyboard, rev 1.10/1.22, addr 3
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22,
addr 4, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22,
addr 4, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uaudio0 at uhub4 port 2 configuration 1 interface 0: Griffin
Technology, Inc iMic USB audio system, rev 1.10/0.05, addr 5
uaudio0: ignored input endpoint of type adaptive
uaudio0: ignored input endpoint of type adaptive
uaudio0: ignored input endpoint of type adaptive
uaudio0: audio rev 1.00, 8 mixer controls
audio0 at uaudio0
uhidev2 at uhub3 port 2 configuration 1 interface 0
uhidev2: Kensington Kensington USB/PS2 Wheel Mouse, rev 1.10/1.00,
addr 6, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: sd0 matches BIOS drive 0x81
dkcsum: sd1 matches BIOS drive 0x82
dkcsum: sd2 matches BIOS drive 0x83
root on wd0a swap on wd0b dump on wd0b
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rsd0a: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rsd2a: file system is clean; not checking
/dev/rsd1a: file system is clean; not checking
setting tty flags
starting network
starting system logger
starting initial daemons: portmap rdate ntpd.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Sun Nov 4 18:00:49 PST 2007
--
Ticketmaster and Ticketweb suck, but everyone knows that:
http://ticketmastersucks.org
http://lodesertprotosites.org
Dethink to survive - Mclusky
