On Fri, 30 Nov 2007, holger glaess wrote:
of cause , i try to setup com2 but the system says at bootpromt "com port is
not aviable" , but if the kernel
already loaded the com port is aviable.
there is no setting options at the bios to change the com port from the ipmi
board.
Doesn't the bootloader number the com ports from zero on? AFAIR I could
set the bootloader on a DL 385 to use the ILO com port via setting up com1
in boot.conf. This is a few month since I did that and I have no physical
access to that machine now, so I can't look at it further.
Best Regards,
Markus
