Hi,
I'm using OpenBSD 4.2 on a soekris 4501.
I have attached a USB controller and plugged in a harddrive.
The problem is, the device doesn't get recognized by OpenBSD.
Then I tried another box and plugged in the same harddrive.
result: it works.
But I need to run this disk at my soekris box.
Following my dmesg output (working machine):
$ dmesg
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2100+ ("AuthenticAMD" 686-class, 256KB L2 cache)
1.75 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536375296 (511MB)
avail mem = 511008768 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/05/02, BIOS32 rev. 0 @ 0xfdae0,
SMBIOS rev. 2.3 @ 0xf0640 (32 entries)
bios0: vendor American Megatrends Inc. version "07.00T " date 11/05/2002
bios0: Gigabyte Technology Co., Ltd. 7VRXP
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7b60/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xbc00
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce3 Ti 200" rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ral0 at pci0 dev 12 function 0 "Ralink RT2560" rev 0x01: irq 11, address
00:80:5a:33:31:6c
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00
iic0 at viapm0
maxtmp0 at iic0 addr 0x4c: lm90
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L060AVV207-0>
wd0: 16-sector PIO, LBA48, 39266MB, 80418240 sectors
wd1 at pciide0 channel 0 drive 1: <IC35L060AVER07-0>
wd1: 16-sector PIO, LBA, 58644MB, 120103200 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <E-IDE, CD-ROM 52X/AKH, A64> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 10
uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 10
rl0 at pci0 dev 19 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:20:ed:3b:65:a2
rlphy0 at rl0 phy 0: RTL internal PHY
uhci2 at pci0 dev 20 function 0 "VIA VT83C572 USB" rev 0x50: irq 11
uhci3 at pci0 dev 20 function 1 "VIA VT83C572 USB" rev 0x50: irq 11
ehci0 at pci0 dev 20 function 2 "VIA VT6202 USB" rev 0x51: irq 5
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: VIA EHCI root hub, rev 2.00/1.00, addr 1
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: VIA UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: VIA UHCI root hub, rev 1.00/1.00, addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef65 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a swap on wd0b dump on wd0b
umass0 at uhub1 port 1 configuration 1 interface 0
umass0: JMicron USB to ATA/ATAPI Bridge, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <SAMSUNG, HD501LJ, > SCSI2 0/direct fixed
sd0: 476940MB, 60801 cyl, 255 head, 63 sec, 512 bytes/sec, 976773168 sec
total
dmesg output of soekris box:
$ dmesg
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Am5x86 W/B 133/160 ("AuthenticAMD" 486-class)
cpu0: FPU
real mem = 66678784 (63MB)
avail mem = 55808000 (53MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/41/22, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
elansc0 at pci0 dev 0 function 0 "AMD ElanSC520 PCI" rev 0x00: product 0
stepping 1.1, CPU clock 133MHz, reset 40<SCP>
gpio0 at elansc0: 32 pins
ohci0 at pci0 dev 17 function 0 "NEC USB" rev 0x43: irq 10, version 1.0
ohci1 at pci0 dev 17 function 1 "NEC USB" rev 0x43: irq 10, version 1.0
ehci0 at pci0 dev 17 function 2 "NEC USB" rev 0x04: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: NEC EHCI root hub, rev 2.00/1.00, addr 1
sis0 at pci0 dev 18 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 11, address 00:00:24:c4:b9:38
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 19 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 5, address 00:00:24:c4:b9:39
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
sis2 at pci0 dev 20 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 9, address 00:00:24:c4:b9:3a
nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: NEC OHCI root hub, rev 1.00/1.00, addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2: NEC OHCI root hub, rev 1.00/1.00, addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <SanDisk SDCFB-512>
wd0: 4-sector PIO, LBA, 488MB, 1000944 sectors
wd0(wdc0:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask f5c5 netmask ffe5 ttymask ffe7
pctr: no performance counters in CPU
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
Do you have any hints how this problem could be solved?
regards,
Christian Rudolph
