On 2008/02/02 11:55, Christian Rudolph wrote: > I'm using OpenBSD 4.2 on a soekris 4501.
you have to be careful with PCI cards in 4501, the power supply is very limited, it's quite possible to damage your soekris with the wrong card. http://lists.soekris.com/pipermail/soekris-tech/2003-July/003036.html 4801/5501 are more flexible. > I have attached a USB controller and plugged in a harddrive. > The problem is, the device doesn't get recognized by OpenBSD. > > Then I tried another box and plugged in the same harddrive. > result: it works. > > But I need to run this disk at my soekris box. > > Following my dmesg output (working machine): > $ dmesg > OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: AMD Athlon(tm) XP 2100+ ("AuthenticAMD" 686-class, 256KB L2 cache) > 1.75 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE > real mem = 536375296 (511MB) > avail mem = 511008768 (487MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 11/05/02, BIOS32 rev. 0 @ 0xfdae0, > SMBIOS rev. 2.3 @ 0xf0640 (32 entries) > bios0: vendor American Megatrends Inc. version "07.00T " date 11/05/2002 > bios0: Gigabyte Technology Co., Ltd. 7VRXP > apm0 at bios0: Power Management spec V1.2 > apm0: AC on, battery charge unknown > apm0: flags 30102 dobusy 0 doidle 1 > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7b60/224 (12 entries) > pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8233 ISA" rev 0x00) > pcibios0: PCI bus #1 is the last bus > bios0: ROM list: 0xc0000/0xbc00 > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > pchb0 at pci0 dev 0 function 0 "VIA VT8366 PCI" rev 0x00 > ppb0 at pci0 dev 1 function 0 "VIA VT8366 AGP" rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce3 Ti 200" rev 0xa3 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ral0 at pci0 dev 12 function 0 "Ralink RT2560" rev 0x01: irq 11, address > 00:80:5a:33:31:6c > ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 > viapm0 at pci0 dev 17 function 0 "VIA VT8233A ISA" rev 0x00 > iic0 at viapm0 > maxtmp0 at iic0 addr 0x4c: lm90 > pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, > channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <IC35L060AVV207-0> > wd0: 16-sector PIO, LBA48, 39266MB, 80418240 sectors > wd1 at pciide0 channel 0 drive 1: <IC35L060AVER07-0> > wd1: 16-sector PIO, LBA, 58644MB, 120103200 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 > wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <E-IDE, CD-ROM 52X/AKH, A64> SCSI0 5/cdrom > removable > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 > uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x23: irq 10 > uhci1 at pci0 dev 17 function 3 "VIA VT83C572 USB" rev 0x23: irq 10 > rl0 at pci0 dev 19 function 0 "Realtek 8139" rev 0x10: irq 5, address > 00:20:ed:3b:65:a2 > rlphy0 at rl0 phy 0: RTL internal PHY > uhci2 at pci0 dev 20 function 0 "VIA VT83C572 USB" rev 0x50: irq 11 > uhci3 at pci0 dev 20 function 1 "VIA VT83C572 USB" rev 0x50: irq 11 > ehci0 at pci0 dev 20 function 2 "VIA VT6202 USB" rev 0x51: irq 5 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0: VIA EHCI root hub, rev 2.00/1.00, addr 1 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1: VIA UHCI root hub, rev 1.00/1.00, addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2: VIA UHCI root hub, rev 1.00/1.00, addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3: VIA UHCI root hub, rev 1.00/1.00, addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4: VIA UHCI root hub, rev 1.00/1.00, addr 1 > isa0 at mainbus0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pmsi0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pmsi0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > it0 at isa0 port 0x290/8: IT87 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > biomask ef65 netmask ef65 ttymask ffe7 > pctr: user-level cycle counter enabled > mtrr: Pentium Pro MTRR support > dkcsum: wd0 matches BIOS drive 0x80 > dkcsum: wd1 matches BIOS drive 0x81 > root on wd0a swap on wd0b dump on wd0b > umass0 at uhub1 port 1 configuration 1 interface 0 > umass0: JMicron USB to ATA/ATAPI Bridge, rev 2.00/1.00, addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets > sd0 at scsibus1 targ 1 lun 0: <SAMSUNG, HD501LJ, > SCSI2 0/direct fixed > sd0: 476940MB, 60801 cyl, 255 head, 63 sec, 512 bytes/sec, 976773168 sec > total > > > > > dmesg output of soekris box: > $ dmesg > OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: AMD Am5x86 W/B 133/160 ("AuthenticAMD" 486-class) > cpu0: FPU > real mem = 66678784 (63MB) > avail mem = 55808000 (53MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 20/41/22, BIOS32 rev. 0 @ 0xf7840 > pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 > pcibios0: pcibios_get_intr_routing - function not supported > pcibios0: PCI IRQ Routing information unavailable. > pcibios0: PCI bus #0 is the last bus > bios0: ROM list: 0xc8000/0x9000 > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > elansc0 at pci0 dev 0 function 0 "AMD ElanSC520 PCI" rev 0x00: product 0 > stepping 1.1, CPU clock 133MHz, reset 40<SCP> > gpio0 at elansc0: 32 pins > ohci0 at pci0 dev 17 function 0 "NEC USB" rev 0x43: irq 10, version 1.0 > ohci1 at pci0 dev 17 function 1 "NEC USB" rev 0x43: irq 10, version 1.0 > ehci0 at pci0 dev 17 function 2 "NEC USB" rev 0x04: irq 10 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0: NEC EHCI root hub, rev 2.00/1.00, addr 1 > sis0 at pci0 dev 18 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: > irq 11, address 00:00:24:c4:b9:38 > nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 > sis1 at pci0 dev 19 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: > irq 5, address 00:00:24:c4:b9:39 > nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 > sis2 at pci0 dev 20 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: > irq 9, address 00:00:24:c4:b9:3a > nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1: NEC OHCI root hub, rev 1.00/1.00, addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2: NEC OHCI root hub, rev 1.00/1.00, addr 1 > isa0 at mainbus0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard > wdc0 at isa0 port 0x1f0/8 irq 14 > wd0 at wdc0 channel 0 drive 0: <SanDisk SDCFB-512> > wd0: 4-sector PIO, LBA, 488MB, 1000944 sectors > wd0(wdc0:0:0): using BIOS timings > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pccom0: console > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > biomask f5c5 netmask ffe5 ttymask ffe7 > pctr: no performance counters in CPU > dkcsum: wd0 matches BIOS drive 0x80 > root on wd0a swap on wd0b dump on wd0b > > > > Do you have any hints how this problem could be solved? > > regards, > Christian Rudolph
